CAN CSA-CEI IEC 61000-4-28-2001 Electromagnetic Compatibility (EMC) - Part 4-28 Testing and Measurement Techniques - Variation of Power Frequency Immunity Test (First Edition).pdf

《CAN CSA-CEI IEC 61000-4-28-2001 Electromagnetic Compatibility (EMC) - Part 4-28 Testing and Measurement Techniques - Variation of Power Frequency Immunity Test (First Edition).pdf》由会员分享，可在线阅读，更多相关《CAN CSA-CEI IEC 61000-4-28-2001 Electromagnetic Compatibility (EMC) - Part 4-28 Testing and Measurement Techniques - Variation of Power Frequency Immunity Test (First Edition).pdf（33页珍藏版）》请在麦多课文档分享上搜索。

1、National Standard of Canada CAN/CSA-CEI/1EC 61000-4-28-01 CSA INTERNATIONAL - (CEI/IEC 610004-28:1999) Norme nationale du Canada InternationalStandard CEI/IEC 61000428:1999(first edition,1999-11) hasbeen adoptedwithout modification as CSA Standard CAN/CSA-CEI/IEC 610002801, which has been approved a

2、s a National Standard of Canada by the Standards Council of Canada. ISBN l-55324-471 -0 March 2001 Lanormeintemationale CEI/IEC 61000428:1999 (premiike cet aspect demeure la responsabilit de lorganisme rdacteur de normes accrdit. II est recommand aux personnes qui ont besoin de normes de se servir d

3、es Normes nationales du Canada lorsque la chose est possible. Ces normes font lobjet dexamens priodiques ; cest pourquoi il est recommand aux utilisateurs de se procurer ldition la plus rcente de la norme auprs de lorganisme qui la prpare. La responsabilit dapprouver les Normes nationales du Canada

4、incombe au Conseil canadien des normes 270, rue Albert, Bureau 200 Ottawa (Ontario) Kl P 6N7 Canada CSA INTERNATIONAL - - National Standards of Canada are published in English and French. Bien que le but premier vis par cette norme soit nonc sous sa rubrique Domaine dapplication, il est important de

5、 retenir quil incombe lutilisateur de juger si la norme convient ses besoins particuliers. *Marque dpose de lAssociation canadienne de normalisation The Canadian Standards Association, which operates under the name CSA International (CSA), under whose auspices this National Standard has been produce

6、d, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged in standards development and certification activities. CSA standards reflect a national consensus of pro

7、ducers and users - including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by municipal, provincial, and federal governments in their regulations, particularly in the fie

8、lds of health, safety, building and construction, and the environment. Individuals, companies, and associations across Canada indicate their support for CSAs standards development by volunteering their time and skills to CSA Committee work and supporting the Associations objectives through sustainin

9、g memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSAs total membership from which its Directors are chosen. Sustaining memberships represent a major source of income for CSAs standards development activities. The Association offers certificatio

10、n and testing services in support of and as an extension to its standards development activities. To ensure the integrity of its certification process, the Association regularly and continually audits and inspects products that bear the CSA Mark. In addition to its head office and laboratory complex

11、 in Toronto, CSA has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, the Association has developed the necessary expertise to meet its corporate mission: CSA is an independent service organization whose mission is to provide

12、an open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related services to meet national and international needs. For further information on CSA services, write to CSA International 178 Rexdale Boulevard Toronto, Ont

13、ario, M9W 1 R3 Canada CSA INTERNAilONAL - - The Standards Council of Canada is the coordinating body of the National Standards system, a federation of independent, autonomous organizations working towards the further development and improvement of voluntary standardization in the national interest.

14、The principal objects of the Council are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety, and welfare of the public, assisting and protecting the consumer, facilitating domestic and international trade, and furthering intern

15、ational cooperation in the field of standards. A National Standard of Canada is a standard which has been approved by the Standards Council of Canada and one which reflects a reasonable agreement among the views of a number of capable individuals whose collective interests provide to the greatest pr

16、acticable extent a balance of representation of producers, users, consumers, and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of making a significant and timely contribution to the national interest. Approval of a standard a

17、s a National Standard of Canada indicates that a standard conforms to the criteria and procedures established by the Standards Council of Canada. Approval does not refer to the technical content of the standard; this remains the continuing responsibility of the accredited standards-development organ

18、ization. Those who have a need to apply standards are encouraged to use National Standards of Canada whenever practicable. These standards are subject to periodic review; therefore, users are cautioned to obtain the latest edition from the organization preparing the standard. The responsibility for

19、approving National Standards of Canada rests with the Standards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario, Kl P 6N7 Canada Les normes nationales du Canada sont publiees en versions francaise et anglaise. Although the intended primary application of this Standard is stated in its

20、 Scope, it is important to note that it remains the responsibility of the users to judge its suitability for their particular purpose. aRegistered trade-mark of Canadian Standards Association Compatibilit lectromagntique (CEM) - CANKSA-CEVIEC 6 7 000-4-28-07 Partie 4-28 : Techniques dessai et de mes

21、ure - Essai dimmunit la variation de la frquence dalimentation CANJCSA-CEI/IEC 61000-4-28-01 ComputibiZit Zectromatique (CEMI - Purtie 4-28 t Techniques dessai et de mesure - Essai dimmunit Za variation de Zu PhP ence dalimentation Prface CSA Ce document constitue la premire dition de la norme CANKS

22、A-CEI/IEC 61000-4-28, Compatibilit lectromagntique (CEM) - Partie 4-28 : Techniques dessai et de mesure - Essai dimmunit la variation de la frquence dalimentation. II sagit de ladoption, sans modifications, de la norme CEVIEC (Commission fectrotechnique Internationale) 61000-4-28:1999 (premire ditio

23、n, 1999-l l), qui porte le mme titre. Cette norme fait partie de la srie de normes CEI 61000 adopte par la CSA qui traite de la compatibilit lectromagntique. Les normes CSA sont labores grce au temps consacr par les membres des comits et lapport financier provenant de la vente des normes, et aussi g

24、rce des contributions volontaires. Cette norme a t rvise en vue de son adoption pour le Canada par le Sous-comit technique CSA sur la CM basse frquence sous lautorit du Comit technique sur la compatibilit lectromagntique des appareils base tension et du Comit directeur stratgique sur le gnie en mati

25、re dnergie et la compatibilit lectromagntique, et a t approuve par le Comit technique. On peut obtenir la liste des membres du Comit technique sur demande. Cette norme a t approuve comme norme nationale du Canada par le Conseil canadien des normes. Mars 200 7 0 CSA International - 200 7 Tous droits

26、rservs. Aucune partie de cette publication ne peut tre reproduite par quelque moyen que ce soit sans la permission pralable de lditeur. Limpression du document CE/ a t autorise. Lorsque le texte dit “cette norme internationale”, le lecteur doit comprendre “cette Norme nationale du Canada”. Toute dem

27、ande de renseignements sur cette Norme nationale du Canada devrait tre adresse CSA International, 178, boul. Rexdale, Toronto (Ontario) Canada, M9W 1 R3. CSA/# Mars 200 7 CANKSA-CEI/IEC 61000-4-28-O 1 Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniaues - Variation of

28、power freauencv. immunity test CAN/CSA-CEI/IEC 61000-4-28-01 EZectronzagnetic compatibility (EWl - Part 4-28: Testing and measurement techniques - Variation of power /%equency, immunity test CSA Preface This is the first edition of CSA Standard CANKSA-CEI/IEC 61000-4-28, Electromagnetic compatibilit

29、y (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test, which is an adoption without modification of the identically titled CEI/IEC (International Electrotechnical Commission) Standard 61000-4-28:1999 (first edition, 1999-l 1). It forms part of the IEC

30、61000 Series of Standards adopted by CSA covering electromagnetic compatibility. CSA Standards are developed through the dedication of time by committee members and by financial support through sales of Standards and through voluntary contributions. This Standard was reviewed for Canadian adoption b

31、y the CSA Technical Subcommittee on Low Frequency EMC under the jurisdiction of the Technical Committee on Electromagnetic Compatibility of Low Voltage Equipment and the Strategic Steering Committee on Power Engineering and Electromagnetic Compatibility, and has been formally approved by the Technic

32、al Committee. A list of the members of the Technical Committee is available upon request. This Standard has been approved as a National Standard of Canada by the Standards Council of Canada. March 200 7 0 CSA International - 2007 All rights reserved. No part of this publication may be reproduced in

33、any form whatsoever without the prior permission of the publisher. /EC material is reprinted with permission. Where the words “this International Standard” appear in the text, they should be interpreted as “this National Standard of Canada“. Inquiries regarding this National Standard of Canada shoul

34、d be addressed to CSA International, 178 Rexdale Boulevard, Toronto, Ontario, M9W 7 R3. March 200 7 CSA/S NORME INTERNATIONALE INTERNATIONAL 61000-4-28 STANDARD Premiere edition First edition 1999-l 1 PUBLICATION FONDAMENTALE EN CEM BASIC EMC PUBLICATION CompatibiIit6 6lectromagrWique (CEM) - Partie

35、 4-28: Techniques dessai et de mesure - Essai dimmunitk 6 la variation de la frkquence dalimentation Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test 0 IEC 1999 Droits de reproduction rkservbs - Copyright - all rights r

36、eserved Aucune partie de cette publication ne peut Btre reproduite r-11 No part of this publication may be reproduced or utilized in utilis.+e sous quelque forme que oe soit et par aucun pro any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Int

37、ernational, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) T

38、he formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested National Committees. 3) The documents produced have the form of recom

39、mendations for international use and are published in the form of standards, technical specifications, technical reports or guides and they are accepted by the National Committees in that sense. 4) In order to promote international unification, IEC National Committees undertake to apply IEC Internat

40、ional Standards transparently to the maximum extent possible in their national and regional standards. Any divergence between the IEC Standard and the corresponding national or regional standard shall be clearly indicated in the latter. 5) The IEC provides no marking procedure to indicate its approv

41、al and cannot be rendered responsible for any equipment declared to be in conformity with one of its standards. 6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. The IEC shall not be held responsible for identifying

42、 any or all such patent rights. International Standard IEC 61000-4-28 has been prepared by subcommittee 77A: Low- frequency phenomena, of IEC technical committee 77: Electromagnetic compatibility. This standard forms part 4-28 of the IEC 61000 series. It has the status of a basic EMC publication in

43、accordance with IEC Guide 107. The text of this standard is based on the following documents: FDIS Report on voting 77Al287lFDIS 77A1299lRVD 1 Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been

44、 drafted in accordance with the ISO/IEC Directives, Part 3. Annexes A and B are for information only. -6- 61000-4-28 0 CEI:1999 Le comit a dcid que cette publication reste valable jusquen 2001. A cette date, selon dcision pralable du comit, la publication sera l reconduite; l supprime; . remplace pa

45、r une dition rvise, ou l amende. 61000-4-28 0 IEC:1999 -7- The committee has decided that this publication remains valid until 2001. At this date, in accordance with the committees decision, the publication will be l reconfirmed; l withdrawn; l replaced by a revised edition, or l amended. -8- 61 000

46、-4-28 0 CEI: 1999 INTRODUCTION La CEI 61000 est publie sous forme de plusieurs parties conformment la structure suivante: Partie 1: Gnralits Considrations gnrales (introduction, principes fondamentaux) Dfinitions, terminologie Partie 2: Environnement Description de lenvironnement Classification de l

47、environnement Niveaux de compatibilit Partie 3: Limites Limites dmission Limites dimmunit (dans la mesure o elles ne relvent pas de la responsabilit des comits de produits) Partie 4: Techniques dessai et de mesure Techniques de mesure Techniques dessai Partie 5: Guide dinstallation et dattnuation Gu

48、ide dinstallation Mthodes et dispositifs dattnuation Partie 6: Normes gnriques Partie 9: Divers Chaque partie est a son tour subdivise en plusieurs parties, publies soit comme Normes internationales, soit comme spcifications techniques ou rapports techniques, dont certaines ont dj t publies en tant

49、que sections. Dautres seront publies sous le numro de la partie, suivi dun tiret et complt dun second chiffre identifiant la subdivision. 61000-4-28 0 IEC:1999 -9- INTRODUCTION IEC 61000 is published in separate parts according to the following structure: Part 1: General General considerations (introduction, fundamental principles) Definitions, terminology Part 2: Environment Description of