EN 12337-2-2004 en Glass in building - Chemically strengthened soda lime silicate glass - Part 2 Evaluation of conformity Product standard《建筑物用玻璃 化学增强钠钙硅酸盐玻璃 合格评价 产品标准》.pdf

《EN 12337-2-2004 en Glass in building - Chemically strengthened soda lime silicate glass - Part 2 Evaluation of conformity Product standard《建筑物用玻璃 化学增强钠钙硅酸盐玻璃 合格评价 产品标准》.pdf》由会员分享，可在线阅读，更多相关《EN 12337-2-2004 en Glass in building - Chemically strengthened soda lime silicate glass - Part 2 Evaluation of conformity Product standard《建筑物用玻璃 化学增强钠钙硅酸盐玻璃 合格评价 产品标准》.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 12337-2:2004 Glass in building Chemically strengthened soda lime silicate glass Part 2: Evaluation of conformity/Product standard The European Standard EN 12337-2:2004 has the status of a British Standard ICS 81.040.20 BS EN 12337-2:2004 This British Standard was published und

2、er the authority of the Standards Policy and Strategy Committee on 20 October 2004 BSI 20 October 2004 ISBN 0 580 44629 8 National foreword This British Standard is the official English language version of EN 12337-2:2004. The UK participation in its preparation was entrusted by Technical Committee

3、B/520, Glass and glazing in building, to Subcommittee B/520/1, Glass and glazing in building Basic and transformed products, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards w

4、hich implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publi

5、cation does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible internation

6、al/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title p

7、age, pages 2 to 35 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN123372 October2004 ICS81.040.20 Englishversion Glassinbuild

8、ingChemicallystrengthenedsodalimesilicate glassPart2:Evaluationofconformity/Productstandard VerredanslaconstructionVerredesilicatesodocalcique trempchimiquementPartie2:Evaluationdela conformit GlasimBauwesenChemischvorgespanntes KalknatronglasTeil2: Konformittsbewertung/Produktnorm ThisEuropeanStand

9、ardwasapprovedbyCENon27May2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicati

10、ontotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersar

11、ethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDA

12、RDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN123372:2004:E EN 12337-2:2004 (E) 2 Contents Page Foreword. 4 1 Scope 5 2 Normative

13、references . 5 3 Terms and definitions. 6 4 Requirements 6 4.1 Product description 6 4.2 Conformity with the definition of chemically strengthened soda lime silicate glass 6 4.3 Determination of the characteristics performances. 7 4.3.1 Characteristics of chemically strengthened soda lime silicate s

14、afety glass 7 4.3.2 Determination of characteristics of chemically strengthened soda lime silicate glass products. 8 4.4 Durability 10 4.5 Dangerous substances. 11 5 Evaluation of conformity 11 5.1 Genera 11 5.2 Initial type testing of the product (see 5.1, 2). 11 5.2.1 General. 11 5.2.2 Initial typ

15、e testing of chemically strengthened soda lime silicate glass 12 5.2.3 Initial type testing of characteristics performances. 14 5.3 Factory production control and inspection of samples in accordance with a prescribed test plan (see 5.1, 1a and b) 14 5.4 Initial inspection of factory and of factory p

16、roduction control (see 5.1, 1c). 15 5.5 Continuous surveillance and assessment of the factory production control (see 5.1, 1c) 16 6 Marking and/or labelling. 17 6.1 General. 17 6.2 Product marking 17 6.3 Product characteristics 17 6.4 “Characteristics/performance identification paper” . 17 Annex A (

17、normative) Factory production control 18 A.1 Factory Production Control Requirements 18 A.1.1 General. 18 A.1.2 Organisation 18 A.1.3 Control system 18 A.2 Marking 19 A.3 Inspection and testing tables of chemically strengthened soda lime silicate glass production . 20 A.3.1 Information on Table A.1

18、20 A.3.2 Use of proxy testing 20 Annex B (informative) Test methods for factory production control Strength measurement. 23 B.1 Four point bending strength test 23 B.1.1 Requirements 23 EN 12337-2:2004 (E) 3 B.1.2 Measurement method. 23 B.1.3 Test specimens . 23 B.2 Alternative mechanical strength t

19、est methods 23 B.2.1 Three point bending strength test. 23 B.2.2 Concentric bending ring strength test 25 Annex C (informative) Provisions for voluntary involvement of third party(ies) . 26 C.1 General. 26 C.2 Voluntary tasks for third parties 26 C.3 Marking and labelling . 26 Annex ZA (informative)

20、 Clauses of this European Standard addressing the provisions of EU Construction Products Directive. 27 ZA.1 Scope and relevant characteristics. 27 ZA.2 Procedure(s) for the attestation of conformity of chemically strengthened soda lime silicate glass products . 29 ZA.2.1 System(s) of attestation of

21、conformity . 29 ZA.2.2 EC Certificate and Declaration of conformity 31 ZA.3 CE marking and labelling . 33 Bibliography . 35 EN 12337-2:2004 (E) 4 Foreword This document (EN 12337-2:2004) has been prepared by Technical Committee CEN/TC TC 129 “Glass in building”, the secretariat of which is held by I

22、BN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2005, and conflicting national standards shall be withdrawn at the latest by July 2006. This document has been prepared under a mandate gi

23、ven to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the n

24、ational standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

25、 Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. No existing document is superseded This part of the document does not stand-alone; it is a part of one document: EN 12337-1: Glass in building Chemically strengthened soda lime silicate glass Part 1: Definition and descrip

26、tion EN 12337-2: Glass in building - Chemically strengthened soda lime silicate glass Part 2: Evaluation of conformity/Product standard This document contains other aspects of importance of trade. EN 12337-2:2004 (E) 5 1 Scope This document covers the evaluation of conformity and the factory product

27、ion control of flat chemically strengthened soda lime silicate glass for use in buildings. Note: For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply. 2 Normative references The following referenced docu

28、ments are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 356, Glass in building - Security glazing - Testing and classification of r

29、esistance against manual attack EN 410, Glass in building - Determination of luminous and solar characteristics of glazing EN 572 1, Glass in building - Basic soda lime silicate glass products Part 1: Definition and general physical and mechanical properties EN 572 2, Glass in building - Basic soda

30、lime silicate glass products Part 2: -Float glass EN 572 4, Glass in building - Basic soda lime silicate glass products Part 4: Drawn sheet glass EN 572 5, Glass in building - Basic soda lime silicate glass products Part 5: Patterned glass EN 673, Glass in building Determination of thermal transmitt

31、ance (U value) Calculation method EN 1063, Glass in building - Security glazing - Testing and classification of resistance against bullet attack EN 12337-1:2000, Glass in building Chemically strengthened soda lime silicate glass Part 1: Definition and description EN 12600, Glass in building - Pendul

32、um test - Impact test method and classification for flat glass EN 12758, Glass in building - Glazing and airborne sound insulation Product descriptions and determination of properties EN 12898, Glass in building - Determination of the emissivity prEN 13474, Glass in building - Design of glass panes

33、EN 13501-1, Fire classification of construction products and building elements Part 1: Classification using test data from reaction to fire tests EN 13501-2, Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding v

34、entilation services prEN 13501-5, Fire classification of construction products and building elements - Part 5: Classification using test data from external fire exposure to roof tests EN 13541, Glass in building - Security glazing - Testing and classification of resistance against explosion pressure

35、 EN 12337-2:2004 (E) 6 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 12337-1:2000 and the following apply. 3.1 initial type testing determination of the performance of a product (characteristic, durability), on the basis of either actual tests or ot

36、her procedures (such as conventional, standardised, tabulated or general accepted values, standardised or recognised calculation methods, test reports when made available, ), in accordance with this document that demonstrates compliance with this document 3.2 test report document that covers the res

37、ults of tests undertaken on a representative sample of the product from production or on a prototype design of the product 3.3 product description document that details the relevant parameters, e.g. process conditions, structure, etc., for defining a product that complies with the standard. It inclu

38、des specific reference(s) to characteristics that are modified by the production process 3.4 significant change variation in performance beyond the permitted tolerance for the characteristic 4 Requirements 4.1 Product description For conformity purposes the chemically strengthened glass manufacturer

39、 is responsible for the preparation and maintenance of the product description. This description shall describe the product and/or product families. Disclosure of the product description shall be at the discretion of the chemically strengthened glass manufacturer or his agent except in the case of r

40、egulatory requirements. The description shall contain at least a normative part. The description may also contain an informative part, when the manufacturer foresees further development of the product. The normative part of the description shall contain the following minimum information: - a referen

41、ce to EN 12337 parts 1 and 2 and all other standards with which the manufacturer claims compliance. The definition of product families shall be consistent with the normative part of the product description. The substitution of materials shall maintain the conformity with the product description. The

42、 substituting material can be added to the product family and also the product description when compliance has been demonstrated . 4.2 Conformity with the definition of chemically strengthened soda lime silicate glass Products shall conform to the definition and fulfill the requirements of chemicall

43、y strengthened soda lime silicate glass as defined in EN 12337-1 EN 12337-2:2004 (E) 7 4.3 Determination of the characteristics performances 4.3.1 Characteristics of chemically strengthened soda lime silicate safety glass 4.3.1.1 General The characteristics of chemically strengthened soda lime silic

44、ate safety glass are in general those of the glass substrate ( see 4.3.1.2). 4.3.1.2 Characteristics of the soda lime silicate glass panes used for the production of chemically strengthened soda lime silicate glass Panes shall be made of soda lime silicate glass according to EN 572-1, EN 572-2, EN 5

45、72-4, EN 572- 5. For the characteristics listed in Table 1, for the soda lime silicate glass panes, generally accepted values or calculated values may be used. Since the majority of the characteristics of Table 1 are not changed significantly by the chemical strengthening process they shall be used

46、for chemically strengthened soda lime silicate glass. The exceptions being the characteristic bending strength (f g,k)and the resistance against sudden temperature changes and temperature differentials. EN 12337-2:2004 (E) 8 Table 1: Information on the characteristics of soda lime silicate glass pan

47、es, according to EN 572-1, used for the production of chemically strengthened soda lime silicate glass Characteristic Symbol Unit - density - hardness - Youngs modulus - Poissons ratio - Characteristic bending strength - Resistance against sudden temperature changes and temperature differentials - S

48、pecific heat capacity - Coefficient of linear expansion - Thermal conductivity (for U-value) - Mean refractive index to visible radiation - Emissivity - Light transmittance - Solar direct transmittance - Total energy transmittance HK 0,1/20 E f g,k c n v eg kg/m GPa Pa Dimensionless Pa K J/(kg.K) K -1W/(m.K) Dimensionless Dimensionless Dimensionless Dimensionless Dimensionless 4.3.2 Determination of characteristics of chemically strengthened soda lime silicate glass products If the chemically strengthen