REG UFGS-02 42 51-2012 CARPET REMOVAL AND RECLAMATION.pdf

《REG UFGS-02 42 51-2012 CARPET REMOVAL AND RECLAMATION.pdf》由会员分享，可在线阅读，更多相关《REG UFGS-02 42 51-2012 CARPET REMOVAL AND RECLAMATION.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、*USACE / NAVFAC / AFCESA / NASA UFGS-02 42 51 (February 2012)-Preparing Activity: NASA SupersedingUFGS-02 42 51 (May 2009)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated January 2012*SECTION TABLE OF CONTENTSDIVISION 02 - EXISTING CONDITIONSSECTION 02 42 51CARPET R

2、EMOVAL AND RECLAMATION02/12PART 1 GENERAL1.1 REFERENCES1.2 SUMMARY1.3 SUBMITTALS1.4 QUALITY ASSURANCE1.4.1 Carpet Reclamation Agency1.4.2 Carpet Remover Requirements1.4.3 Carpet Reclamation Agency Submittal1.4.4 Regulatory Requirements1.4.4.1 Carpet Reclamation Agency and Carpet Remover Certificatio

3、n1.5 PROJECT CONDITIONS1.5.1 Environmental RequirementsPART 2 PRODUCTS2.1 CARPET RECLAMATION AGENCY2.2 CARPET REMOVERS2.3 MATERIALS2.3.1 Adhesive Removal Solvents2.3.2 Used Carpet2.3.3 Carpet PadPART 3 EXECUTION3.1 EXAMINATION3.1.1 Verification of Conditions3.2 PREPARATION3.3 CARPET REMOVAL3.4 CONTA

4、INER DISPOSAL3.5 TRUCK TRAILER DISPOSAL3.6 INTERIOR OPERATIONS- End of Section Table of Contents -SECTION 02 42 51 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-02 42 51 (February 2012)-Preparing Activity:

5、 NASA SupersedingUFGS-02 42 51 (May 2009)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated January 2012*SECTION 02 42 51CARPET REMOVAL AND RECLAMATION02/12*NOTE: This guide specification covers the requirements for removal and reclamation of used carpet, including EP

6、A Affirmative Procurement requirements and Carpet America Recovery Efforts (CARE).Adhere to UFC 1-300-02 Unified Facilities Guide Specifications (UFGS) Format Standard when editing this guide specification or preparing new project specification sections. Edit this guide specification for project spe

7、cific requirements by adding, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Comments, suggestions and recommended changes for th

8、is guide specification are welcome and should be submitted as a Criteria Change Request (CCR).*PART 1 GENERAL1.1 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications are referred to in the text by basic designation only and l

9、isted in this paragraph by organization, designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference Article. Also use the Reference Wizards Check Reference feature t

10、o update SECTION 02 42 51 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-the issue dates.References not used in the text will automatically be deleted from this section of the project specification when you choose to reconcile references in th

11、e publish print process.*The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.AMERICAN SOCIETY OF SAFETY ENGINEERS (ASSE/SAFE)ASSE/SAFE A10.6 (2006) Safety Requirements for Demolition

12、OperationsU.S. ENVIRONMENTAL PROTECTION AGENCY (EPA)EPA 340/1-90/018 (1990) Asbestos/NESHAP Regulated Asbestos Containing Materials GuidanceEPA AP-42 (1995) Compilation of Air Pollution Emission FactorsU.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)40 CFR 247 Comprehensive Procurement Guide

13、line for Products Containing Recovered Materials40 CFR 61-SUBPART M National Emission Standard for Asbestos1.2 SUMMARY*NOTE: Recycled materials are listed in the EPAs Comprehensive Procurement Guidelines (CPG) http:/www.epa.gov/cpg/. Guidelines are stated for the recommended recycling of Building Ma

14、terials, Paint, and other miscellaneous materials.If the Architect/Engineer/Contracting Officer determines that the salvage value of certain materials meeting the CPG guidelines is insufficient in quantity to merit recycling, or if due to geographical considerations impractical to implement, a waive

15、r may be initiated for the project. Written justification may be submitted on a Request for Waiver Form to the NASA_ Environmental Program Manager for approval.*Furnish a contract for used carpet reclamation, including planned procedures for removal and reclamation of used carpet.Refer to related Se

16、ction 09 68 00 CARPET for floor preparation prior to installation of new carpet.SECTION 02 42 51 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1.3 SUBMITTALS*NOTE: Review Submittal Description (SD) definitions in Section 01 33 00 SUBMITTAL PR

17、OCEDURES and edit the following list to reflect only the submittals required for the project.The Guide Specification technical editors have designated those items that require Government approval, due to their complexity or criticality, with a “G.“ Generally, other submittal items can be reviewed by

18、 the Contractors Quality Control System. Only add a “G” to an item, if the submittal is sufficiently important or complex in context of the project.For submittals requiring Government approval on Army projects, a code of up to three characters within the submittal tags may be used following the “G“

19、designation to indicate the approving authority. Codes for Army projects using the Resident Management System (RMS) are: “AE“ for Architect-Engineer; “DO“ for District Office (Engineering Division or other organization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“

20、 for Project Office. Codes following the “G“ typically are not used for Navy, Air Force, and NASA projects.Choose the first bracketed item for Navy, Air Force and NASA projects, or choose the second bracketed item for Army projects.*Government approval is required for submittals with a “G“ designati

21、on; submittals not having a “G“ designation are for Contractor Quality Control approval.for information only. When used, a designation following the “G“ designation identifies the office that will review the submittal for the Government. Submit the following in accordance with Section 01 33 00 SUBMI

22、TTAL PROCEDURES:SD-01 Preconstruction SubmittalsProposed Dust-Control Measures; G; G, _Proposed Packing And Transportation Measures; G; G, _Schedule of Carpet Reclamation Activities; G; G, _Carpet Reclamation Agency Records; G; G, _1.4 QUALITY ASSURANCE1.4.1 Carpet Reclamation AgencyProvide document

23、ation of being a Carpet America Recovery Efforts (CARE) approved carpet removal contractor (or designated agent firm) providing used carpet recycling under the most current EPA recognized Carpet SECTION 02 42 51 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without licen

24、se from IHS-,-,-Reclamation Program, or equivalent from alternate recycling agent.1.4.2 Carpet Remover RequirementsSubmit details for the following:Proposed dust-control measuresProposed packing and transportation measures1.4.3 Carpet Reclamation Agency SubmittalSubmit a copy of carpet reclamation a

25、gency records verifying receipt and disposition of used carpet.1.4.4 Regulatory RequirementsComply with governing regulations; including, but not limited to:EPA 340/1-90/018EPA AP-4240 CFR 61-SUBPART MASSE/SAFE A10.640 CFR 247Comply with hauling and disposal regulations of authorities having jurisdi

26、ction. Record and maintain records of all off-site removal of debris and materials.Provide the following information regarding the removed materials withinthe schedule of carpet reclamation activities:a. Time and Date of Removal.b. Type of Material.c. Weight and Quantity of Materials.d. Final Destin

27、ation of Materials.1.4.4.1 Carpet Reclamation Agency and Carpet Remover CertificationCertify in writing that used carpet was removed and recycled in accordance with the most current EPA recognized Carpet Reclamation Program. Do not place removed carpet and associated materials in a landfill.1.5 PROJ

28、ECT CONDITIONS1.5.1 Environmental RequirementsObtain approval of Owner before performing operations which generate contaminants.SECTION 02 42 51 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-PART 2 PRODUCTS2.1 CARPET RECLAMATION AGENCYThe cur

29、rent approved reclamation agency is Carpet America Recovery Effort (CARE).2.2 CARPET REMOVERSSubmit documentation of being a CARE approved carpet removal contractor.2.3 MATERIALS2.3.1 Adhesive Removal SolventsComply with Carpet and Rug Institute Publication 104.2.3.2 Used CarpetMaintain possession o

30、f removed used carpet. Immediately remove from site and place in container or trailer.Carefully remove, store, and protect designated materials and equipment for re-installation under other Sections or for retention by Owner.2.3.3 Carpet PadProvide recycling of carpet padding where locally available

31、 or as designated by Carpet Reclamation Agency.PART 3 EXECUTION3.1 EXAMINATION3.1.1 Verification of ConditionsExamine areas and conditions under which work is to be performed; identify conditions detrimental to proper or timely completion. Do not proceed until unsatisfactory conditions have been cor

32、rected.3.2 PREPARATIONProvide, erect, and maintain barricades, lighting, and guardrails as required to protect general public, workers, and adjoining property.Vacuum used carpet before removal.3.3 CARPET REMOVALRemove used carpets in large pieces, roll tightly, and pack neatly in container. Include

33、carpet scrap and waste from new installation.Deposit only clean, dry carpet in containers. “Clean“ is defined as free from demolition debris, asbestos contamination, garbage, and tack strips.Remove adhesive according to recommendations of the Carpet and Rug Institute (CRI).SECTION 02 42 51 Page 6Pro

34、vided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3.4 CONTAINER DISPOSALPlace used carpet in fully-enclosed, front end loading 30 cubic m 40-yard container supplied by Carpet Reclamation Agency. Place only used commercial carpeting in collection container

35、. Keep container locked or supervised.Use effective packing techniques to maximize the amount of material in the container. On average, a container holds 1700-2500 square m 2,000-3,000 square yards. Neatly stack carpet tiles or repack in cardboard boxes before placing in container.When container is

36、full, contact Carpet Reclamation Agency to coordinate pickup and drop-off of replacement container. If container is locked for security purposes, remove lock before pickup.3.5 TRUCK TRAILER DISPOSALPlace used carpet in a 16 m 53-foot trailer supplied by Carpet Reclamation Agency. Place only used com

37、mercial carpeting in trailer. Keep trailer locked or supervised.Use effective packing techniques to maximize the amount of material in the trailer. Comply with Department of Transportation regulations for weight limits. Typical maximum weight of used carpet on trailers is 20,000 kg45,000 pounds.Neat

38、ly stack carpet tiles or repack in cardboard boxes before placing in trailer. Do not stack higher than 2 m 6 feet. When trailer is full, contact Carpet Reclamation Agency to coordinate pickup and drop-off of replacement trailer. If trailer is locked for security purposes, remove lock before pickup.3

39、.6 INTERIOR OPERATIONSSeal doors and other openings with duct tape at heads, jambs, and sills to contain contaminants from work which occurs within a single room.Use window exhaust systems to establish negative pressure in contaminant-producing work areas, ensuring continuous flow of air into work a

40、rea.Do not open windows in work area except when an exhaust fan is used. Close windows at end of each work shift. Seal exhaust system ductwork which might leak into building or mechanical systems.Damp mop hard surface floors in work area daily to minimize tracking of contaminants from work area. In carpeted areas, protect carpet with plastic and plywood. Provide hard-surfaced area at entrances for daily damp mopping.- End of Section -SECTION 02 42 51 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-