FORD ESF-M1L121-A-2003 CABLE FIVE CONDUCTOR (PVC INSULATED) - SHIELDED - GROUNDED VINYL JACKET TO BE USED WITH FORD WSS-M99P1111-A 《乙烯树脂护套的接地、屏蔽的5导线(聚氯乙烯(PVC)绝缘)电缆 与标准FORD WSS-M.pdf

《FORD ESF-M1L121-A-2003 CABLE FIVE CONDUCTOR (PVC INSULATED) - SHIELDED - GROUNDED VINYL JACKET TO BE USED WITH FORD WSS-M99P1111-A 《乙烯树脂护套的接地、屏蔽的5导线(聚氯乙烯(PVC)绝缘)电缆 与标准FORD WSS-M.pdf》由会员分享，可在线阅读，更多相关《FORD ESF-M1L121-A-2003 CABLE FIVE CONDUCTOR (PVC INSULATED) - SHIELDED - GROUNDED VINYL JACKET TO BE USED WITH FORD WSS-M99P1111-A 《乙烯树脂护套的接地、屏蔽的5导线(聚氯乙烯(PVC)绝缘)电缆 与标准FORD WSS-M.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2003 06 25 Revised Para 3.0 inserted; Para 3.1, 3.3, & 4 deleted 1986 08 22 CF4QRO888002-430 Released Printed copies are uncontrolled Copyright 2003, Ford Global Technologies, Inc. Page 1 of 1 CABLE, FIVE CONDUCTOR (PVC INSULATED) - ESF-M1L121

2、-A SHIELDED GROUNDED VINYL JACKET 1. SCOPE The material defined by this specification is a cable consisting of five PVC insulated conductors, shielded and ground wire wrapped, having a 105 C vinyl outer jacket. The conductors, ground wire and shielding are wrapped around a polypropylene rope. 2. APP

3、LICATION The specification was released originally for the graphic equalizer. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 CONSTRUCTION 3.2.1

4、Conductors Shall be SAE wire size #18 (16 strands of #30 Awg) and shall conform to ESF-M1L58-A PVC Insulated Low Tension Cable. 3.2.2 Shielding Shall consist of aluminum foil bonded to polyester film, having an approximate thickness of 0.038 mm. The shielding, with the aluminum foil to the outside o

5、f the cable, shall be tightly wound around both conductors with a minimum overlap to insure no gaps. 3.2.3 Ground Wire Shall be SAE wire size #18, consisting of 16 strands of #30 Awg wire conforming to ESF-M2L1-A , Soft or Annealed Copper Wire. It shall be wound approximately 1 turn/25 mm over the foil. Outer Jacket Shall be 105 C vinyl. The finished outside diameter of the cable shall be a maximum of 9 mm.