ASTM D7054-2004 Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America《与北美用涂料敷抹器一起使用的伸缩杆的警告标签的标准规范》.pdf

《ASTM D7054-2004 Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America《与北美用涂料敷抹器一起使用的伸缩杆的警告标签的标准规范》.pdf》由会员分享，可在线阅读，更多相关《ASTM D7054-2004 Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America《与北美用涂料敷抹器一起使用的伸缩杆的警告标签的标准规范》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: D 7054 04Standard Specification forCautionary Labeling of Extension Poles For Use With PaintApplicators Distributed In North America1This standard is issued under the fixed designation D 7054; the number immediately following the designation indicates the year oforiginal adoption or, in

2、 the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.1. Scope1.1 This specification covers generally recognized require-ments for the cautionary la

3、beling to be placed on extensionpoles manufactured or sold, or both, for the use with paintpreparation and application tools. This specification does notaddress any other labeling, construction, or safety require-ments.1.2 The values stated in SI units are to be regarded as thestandard. The values g

4、iven in parenthesis are for informationonly.1.3 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulat

5、ory limitations prior to use.2. Referenced Documents2.1 ANSI Standards:ANSI Z535.1 1998 Safety Color Code2ANSI Z535.4 1998 Product Safety Signs and Labels23. Terminology3.1 Definitions of Terms Specific to This Standard:3.1.1 extension pole, nlong, slender piece or pieces ofwood, metal, plastic, com

6、posite, or combination of materials,having a fixed or adjustable length and a threaded tip or othermeans of attaching a paint applicator or preparation tool to oneend, used to increase reach.3.1.2 label, nrefers to but is not limited to a decal or selfadhesive piece of paper, plastic or metal which

7、contains thewarning information.3.1.3 paint applicator tool, nbrush, roller, or other toolused to apply, spread and smooth paint onto a surface.3.1.4 paint preparation tool, nscraper, wire brush, scrubbrush, or other tool used to prepare a surface to be painted.4. Significance and Use4.1 Warning lab

8、els on extension poles will alert the end userof the product to potential of serious electrical shock injury ifthe product is used too close to electrical power lines.5. Requirements5.1 General:5.1.1 The warning label can be incorporated with a productlabel.5.1.2 The warning label must be constructe

9、d of a materialthat is water and solvent resistant and be permanently affixed tothe extension pole.5.1.3 The warning and product label must cover at least75 % of the circumference of the extension pole (for example,an extension pole that is 2.54 cm (1 in.) in diameter shall havea label that is at le

10、ast 5.98 cm (2.356 in.) wide).5.2 Label:5.2.1 The warning portion of the label shall be trilingual(English, French, Spanish). See Table 1 for translations.5.2.2 The warning portion of the label shall incorporate ablack border that separates it from any other information on thelabel.5.2.3 The warning

11、 portion of the label shall incorporate avertical or horizontal three panel design containing threecomponents: (1) a signal word, (2) symbol/pictorial panel, and(3) word message (see Fig. 1 for example).5.2.4 The signal word panel shall have a safety orangebackground with black lettering and contain

12、 the word “WARN-ING” in uppercase boldface letters at least 12 point type(approximately 4 mm (0.157 in.) in height), preceded by ablack equilateral triangle with a safety orange exclamationpoint inside it. The base of the triangle shall line up with thebase of the signal word, and shall equal or exc

13、eed the signalword in height.5.2.5 The symbol/pictorial panel shall have a white back-ground with a black outlined equilateral triangle at least 1.27cm (0.5 in.) in height containing a black lightning bolt inside it,see Fig. 1 for example.5.2.6 The word message shall have a white background withblac

14、k lettering and contain the words:1This specification is under the jurisdiction of ASTM Committee D01 on Paintand Related Coatings, Materials, and Applications and is the direct responsibility ofSubcommittee D01.61 on Paint Application Tools.Current edition approved June 1, 2004. Published June 2004

15、.2Available from American National Standards Institute (ANSI), 25 W. 43rd St.,4th Floor, New York, NY 10036.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.“THIS EXTENSION POLECONDUCTS ELECTRICITY.HAZARD OF ELECTRICALSHOCK OR BURNAVO

16、ID POWER LINESKeep at least 10 feet(3 meters) away from anypower lines.”in uppercase and lowercase in letters at least 6 point type(approximately 2 mm (0.079 in.) in height), see Fig. 1 forexample.5.2.7 The warning label shall be placed 10.16 to 20.32 cm (4to 8 in.) from the threaded or attachment e

17、nd of the pole.5.2.8 Acceptable styles of letter shall include Arial, ArialBold, Folio Medium, Franklin Gothic, Helvetica Bold, MetaBold, News Gothic Bold, Poster Gothic, and Univers.6. Keywords6.1 brush; extension pole; paint applicator; paint brush;paint roller; roller; scrub brush; warning label;

18、 wire brushASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such

19、rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additio

20、nal standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the A

21、STM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the ab

22、oveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org).TABLE 1 Trilingual Warning Portion of LabelEnglish French SpanishWARNINGThis extension pole conducts electricity.HAZARD OF ELECTRICALSHOCK OR BURNAVOID POWER LINESKeep at

23、 least 10 feet (3 meters)away from any power lines.ADVERTENCIACe manche rallonge conduit llectricit.RISQUE DE CHOCSLECTRIQUES OU DE BRLURESVITEZ LES LIGNES LECTRIQUESNe pas sapprochez moins de10 pieds (3 mtres) des lignes lectriques.AVERTISSEMENTEsta vara de extensin conduce electricidad.PELIGRO DE SACUDIDAELCTRICA O DE QUEMADURASEVITE LAS LNEAS DE ENERGA ELCTRICAMantngala a una distancia depor lo menos 10 pies (3 metros)de las lneas de energa elctrica.FIG. 1 Example of Warning Label FormatD7054042