EN 3820-2006 en Aerospace series - Metric bolts normal hexagon head coarse tolerance normal shank short thread in titanium alloy anodized MoS2 lubricated - Classification 1 100 MPa.pdf

《EN 3820-2006 en Aerospace series - Metric bolts normal hexagon head coarse tolerance normal shank short thread in titanium alloy anodized MoS2 lubricated - Classification 1 100 MPa.pdf》由会员分享，可在线阅读，更多相关《EN 3820-2006 en Aerospace series - Metric bolts normal hexagon head coarse tolerance normal shank short thread in titanium alloy anodized MoS2 lubricated - Classification 1 100 MPa.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD AEROSPACE SERIESBS EN3820:2006Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated Classification: 1 100 MPa (at ambient temperature)/315 CThe European Standard EN 3820:2006 has the status of a British StandardI

2、CS 49.030.20g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 3820:2006This British Standard was published under the authority of the Standards

3、Policy and Strategy Committee on 31 July 2006 BSI 2006ISBN 0 580 48511 0National forewordThis British Standard is the official English language version of EN 3820:2006. The UK participation in its preparation was entrusted to Technical Committee ACE/12, Aerospace fasteners and fastening systems, whi

4、ch has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the sectio

5、n entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Comp

6、liance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related in

7、ternational and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 9 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendment

8、s issued since publicationAmd. No. Date CommentsEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3820 July 2006 ICS 49.030.20 English Version Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classifi

9、cation: 1 100 MPa (at ambient temperature)/315 C Srie arospatiale - Vis mtriques tte hexagonale normale, ft normal tolrance large, filetage court, en alliage de titane, anodises, lubrifies MoS2 - Classification: 1 100 MPa ( temprature ambiante)/315 CLuft- und Raumfahrt - Sechskantschrauben, kurzes G

10、ewinde, aus Titanlegierung, anodisiert, MoS2-geschmiert - Klasse: 1 100 MPa (bei Raumtemperatur)/315 C This European Standard was approved by CEN on 13 January 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Stan

11、dard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French,

12、 German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic

13、, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NOR

14、MALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3820:2006: E2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Requir

15、ed characteristics.5 3.1 Configuration Dimensions Masses 5 3.2 Tolerances of form and position5 3.3 Materials .5 3.4 Surface treatment 5 4 Designation 9 5 Marking .9 6 Technical specification .9 6.1 Approval of manufacturers.9 6.2 Qualification of bolts .9 6.3 Requirement deleted .9 EN 3820:20063 Fo

16、reword This European Standard (EN 3820:2006) has been prepared by the AeroSpace and Defense Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National A

17、ssociations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2007, and conflicting national stand

18、ards shall be withdrawn at the latest by January 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC In

19、ternal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Net

20、herlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 3820:20064 1 Scope This standard specifies the characteristics of bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubric

21、ated. Classification: 1 100 MPa1)/ 315 C2). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any ame

22、ndments) applies. ISO 3193, Aerospace Bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa Dimensions ISO 3353-1, Aerospace Lead and runout threads Part 1: Rolled external threads ISO 58

23、55-2, Aerospace MJ threads Part 2: Limit dimensions for bolts and nuts ISO 7913, Aerospace Bolts and screws, metric Tolerances of form and position ISO 9152, Aerospace Bolts, with MJ threads, in titanium alloys, strength class 1 100 MPa Procurement specification EN 2424, Aerospace series Marking of

24、aerospace products EN 2491, Aerospace series Molybdenum disulphide dry lubricants Coating methods EN 9100, Aerospace series - Quality management systems - Requirements (based on ISO 9001:2000) and Quality systems - Model for quality assurance in design, development, production, installation and serv

25、icing (based on ISO 9001:1994) EN 9133, Aerospace series Quality management systems Qualification procedure for aerospace standard parts TR 3775, Aerospace series Bolts and pins National materials3)TR 4070, Aerospace series Molybdenum disulphide dry lubricants List of commercial products3)1) Minimum

26、 tensile strength of the material at ambient temperature. 2) Maximum temperature that the bolt can withstand without continuous change in its original characteristics, after return to ambient temperature. The maximum temperature is determined by the surface treatment. 3) Published as ASD Technical R

27、eport at the date of publication of this standard. EN 3820:20065 3 Required characteristics 3.1 Configuration Dimensions Masses See Figure 1 and Table 1. Dimensions and tolerances are: in conformity with ISO 3193, expressed in millimetres and apply after anodizing but before lubricating. Details of

28、form not stated are left to the manufacturers discretion. 3.2 Tolerances of form and position See ISO 7913. 3.3 Materials TR 3775 (titanium alloy, strength class 1 100 MPa) 3.4 Surface treatment Lubrication: lubricant: see TR 4070; application: EN 2491: 5 m to 10 m. EN 3820:20066 Key 1 Two holes dia

29、meter D6 (optional) 2 Continuous surface 3 One hole diameter D1(optional) 4 Thread 5 Marking 6 Conforms to ISO 3353 Figure 1 EN 3820:20067 Table 1 D1D2D3D4bD5 D6 D7 E F G H Diameter code Threadah12 min. 05,0min. nom. Tol. H13 H13 min. max. min. 00,3030 MJ30,5 4h6h 3 5,5 5,4 2,3 6,5 0,4 2 040 MJ40,7

30、4h6h 4 6,4 6,4 3 05,0 1,1 7,6 2,5 050 MJ50,8 4h6h 5 7,4 5,25 7,4 3,4 1 8,7 3 1,35 060 MJ61 4h6h 6 9,4 6,25 9,3 4,2 1,5 10,9 3,5 1,6 070 MJ71 4h6h 7 10,3 7,25 10,2 5,2 12 4 1,85 080 MJ81 4h6h 8 12,3 8,25 12,2 6,2 1,4 1,9 14,3 0,5 0,2 4,5 2,1 100 MJ101,25 4h6h 10 16,3 10,25 16 7,9 18,9 5 2,35 120 MJ12

31、1,25 4h6h 12 18,3 12,25 18 9,8 2,4 21,1 6 2,85 140 MJ141,5 4h6h 14 21,3 14,25 21 11,5 24,5 7 3,35 160 MJ161,5 4h6h 16 23,3 16,25 23 13,5 3 26,8 8 3,85 180 MJ181,5 4h6h 18 26,3 18,25 26 15,5 30,2 9 4,35 200 MJ201,5 4h6h 20 29,3 20,25 29 17,5 0,5 1,6 3,8 33,6 0,6 0,3 10 4,85 continued EN 3820:20068 Ta

32、ble 1 (concluded) J K L1 0,2c dL2 L3 N R MasseDiameter code nom. Tol. Code nom. 00,3nom. Tol. f g 030 6 002 to 030 2 to 30 6 0,49 0,03 040 7 002 to 040 2 to 40 7,5 5 0,4 0,93 0,06 050 8 h12 3,25 003 to 050 3 to 50 9 6 2 0,5 1,63 0,09 060 10 4,1 003 to 060 3 to 60 10 2,3 3,05 0,12 070 11 4,5 004 to 0

33、70 4 to 70 11 7 2,7 4,17 0,17 080 13 5,35 004 to 080 4 to 80 11,5 7,5 3 0,7 6,28 0,22 100 17 7,1 005 to 100 5 to 100 14,5 9 3,4 0,8 00,212,19 0,35 120 19 7,9 006 to 120 6 to 120 16 10 4 0,9 19,49 0,50 140 22 9,2 007 to 140 7 to 140 19 12 4,7 30,01 0,68 160 24 10,05 008 to 160 8 to 160 20,5 12,5 5,4

34、1,1 43,88 0,88 180 27 11,3 009 to 180 9 to 180 22,5 14,5 6 61,84 1,12 200 30 h13 12,6 010 to 200 10 to 200 24,5 15 6,7 1,3 00,384,60 1,38 aIn accordance with ISO 5855-2 bD4 max. shall be less than J. cIncrements: 1 for L1 30 2 for 30 100 dIf greater lengths are required, they shall be chosen using t

35、he above increments. The length code corresponds to length L1, completed by one or two zeros to the left, where necessary, to obtain a three digit code. eApproximate values (kg/1 000 pieces), calculated on the basis of 7,85 kg/dm3, for information purposes only. They apply to bolts without holes. fV

36、alue for head and first L4gIncrease for each additional millimetre of L4. EN 3820:20069 4 Designation EXAMPLE Description block Identity block BOLT EN3820 H 050 040 F Number of this standard Hole code (see Table 2) Diameter code (see Table 1) Length code (see Table 1) Lubricant code (see 3.4) NOTE I

37、f necessary, the code I9005 shall be placed between the description block and the identity block. Table 2 Holes Code Lockwire H Split pin D Lockwire and split pin C No hole (hyphen) 5 Marking See Table 3 and Figure 1, indented. Table 3 Diameter code EN 2424 Style 030 and 040 N 050 to 200 C + MJ 6 Te

38、chnical specification ISO 9152, with the following modifications: 6.1 Approval of manufacturers See EN 9100. 6.2 Qualification of bolts See EN 9133. 6.3 Requirement deleted Double shear strength EN 3820:2006BS EN 3820:2006BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is t

39、he independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure th

40、at they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible,

41、the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, int

42、ernational and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to su

43、pply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various B

44、SI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substa

45、ntial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found

46、at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs an

47、d Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of nece

48、ssary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.