ECMA 284-2001 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Private User Mobility (PUM) - Call Handling Additional Network Features《专用综合业务网络(PIS.pdf

《ECMA 284-2001 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Private User Mobility (PUM) - Call Handling Additional Network Features《专用综合业务网络(PIS.pdf》由会员分享，可在线阅读，更多相关《ECMA 284-2001 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Private User Mobility (PUM) - Call Handling Additional Network Features《专用综合业务网络(PIS.pdf（72页珍藏版）》请在麦多课文档分享上搜索。

1、 Standard ECMA-284 3rd Edition - December 2001 Standardizing Information and Communication Systems Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Private User Mobility (PUM) - Call Handling Additional Network Features Phone: +41 22 849.60.00 - Fax: +41 22 849.60.01

2、 - URL: http:/www.ecma.ch - Internet: helpdeskecma.ch . Standard ECMA-284 3rd Edition - December 2001 Standardizing Information and Communication Systems Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Private User Mobility (PUM) - Call Handling Additional Network F

3、eatures (QSIG-PUMCH) Phone: +41 22 849.60.00 - Fax: +41 22 849.60.01 - URL: http:/www.ecma.ch - Internet: helpdeskecma.ch IW Ecma-284.doc 14-01-02 10,31 . Brief History This Standard is one of a series of standards defining services and signalling protocols applicable to Private Integrated Services

4、Networks (PISNs). The series uses ISDN concepts as developed by ITU-T and conforms to the framework of standards for Open Systems Interconnection as defined by ISO/IEC. This Standard specifies the signalling protocol for use at the Q reference point for Private User Mobility call handling additional

5、 network features ANF-PUMI and ANF-PUMO. This Standard is based upon the practical experience of ECMA member companies and the results of their active and continuous participation in the work of ISO/IEC JTC1, ITU-T, ETSI and other international and national standardization bodies. It represents a pr

6、agmatic and widely based consensus. Compared to the 1st Edition of Standard ECMA-284 (published by ECMA in December 1998), the 2nd Edition incorporates changes to achieve complete alignment with International Standard ISO/IEC 17878:2000(E) published by ISO/IEC in April 2000. Compared to the 2nd edit

7、ion of Standard ECMA-284 (published by ECMA in June 2000), this 3rd Edition incorporates migration to ASN.1 version 1997. Adopted as 3rd Edition of Standard ECMA-284 by the General Assembly of December 2001. . - i - Table of contents 1 Scope 1 2 Conformance 1 3 References (normative) 1 4 Definitions

8、 3 4.1 External definitions 3 4.2 Alternative identifier 4 4.3 Home data base (HDB) 4 4.4 Rerouteing PINX 4 4.5 PUMI-detect PINX 4 4.6 Terminal equipment (TE) 4 4.7 Visitor data base (VDB) 4 5 List of acronyms 4 6 Signalling protocol for the support of ANF-PUMI 5 6.1 ANF-PUMI description 5 6.2 ANF-P

9、UMI operational requirements 5 6.2.1 Requirements on the Rerouteing PINX 5 6.2.2 Requirements on the PUMI-detect PINX 5 6.2.3 Requirements on the Home PINX 5 6.2.4 Requirements on the Visitor PINX 5 6.2.5 Requirements on a Transit PINX 6 6.3 ANF-PUMI coding requirements 7 6.3.1 Operations 7 6.3.2 In

10、formation elements 9 6.3.3 Messages 10 6.4 ANF-PUMI state definitions 10 6.4.1 States at the Rerouteing PINX 10 6.4.2 States at the PUMI-detect PINX 10 6.4.3 States at the Home PINX 10 6.4.4 States at the Visitor PINX 10 6.5 ANF-PUMI signalling procedures for invocation and operation 10 6.5.1 Action

11、s at the Rerouteing PINX 10 6.5.2 Actions at the PUMI-detect PINX 11 6.5.3 Actions at the Home PINX 13 6.5.4 Actions at the Visitor PINX 13 6.5.5 Actions at a Transit PINX 14 6.5.6 Actions at an Originating PINX 14 6.6 ANF-PUMI impact of interworking with public ISDNs 14 6.7 ANF-PUMI impact of inter

12、working with non-ISDNs 14 - ii - 6.8 Protocol interactions between ANF-PUMI and other supplementary services and ANFs 14 6.8.1 Interaction with Calling Name Identification Presentation (SS-CNIP) 14 6.8.2 Interaction with Connected Name Identification Presentation (SS-CONP) 14 6.8.3 Interaction with

13、Call Completion to Busy Subscriber (SS-CCBS) 14 6.8.4 Interaction with Call Completion on No Reply (SS-CCNR) 15 6.8.5 Interaction with Call Transfer (SS-CT) 15 6.8.6 Interaction with Call Forwarding Unconditional (SS-CFU) 15 6.8.7 Interaction with Call Forwarding Busy (SS-CFB) 15 6.8.8 Interaction w

14、ith Call Forwarding No Reply (SS-CFNR) 15 6.8.9 Interaction with Call Deflection (SS-CD) 15 6.8.10 Interaction with Path Replacement (ANF-PR) 15 6.8.11 Interaction with Call Offer (SS-CO) 15 6.8.12 Interaction with Call Intrusion (SS-CI) 15 6.8.13 Interaction with Do Not Disturb (SS-DND) 15 6.8.14 I

15、nteraction with Do Not Disturb Override (SS-DNDO) 15 6.8.15 Interaction with Advice Of Charge (SS-AOC) 16 6.8.16 Interaction with Recall (SS-RE) 16 6.8.17 Interaction with Call Interception (ANF-CINT) 16 6.8.18 Interaction with Transit Counter (ANF-TC) 16 6.8.19 Interaction with Route Restriction Cl

16、ass (ANF-RRC) 16 6.8.20 Interaction with Message Waiting Indication (SS-MWI) 17 6.8.21 Interaction with Wireless Terminal Location Registration (SS-WTLR) 17 6.8.22 Interaction with Wireless Terminal Incoming Call (ANF-WTMI) 17 6.8.23 Interaction with Wireless Terminal Outgoing Call (ANF-WTMO) 18 6.8

17、.24 Interaction with Wireless Terminal Authentication of the Terminal (SS-WTAT) 18 6.8.25 Interaction with Wireless Terminal Authentication of the Network (SS-WTAN) 18 6.8.26 Interaction with Private User Mobility Registration (ANF-PUMR) 18 6.8.27 Interaction with Private User Mobility Outgoing Call

18、 (ANF-PUMO) 18 6.8.28 Interactions with Common Information (ANF-CMN) 18 6.8.29 Interaction with Call Priority Interruption (Protection) (SS-CPI(P) 18 6.9 ANF-PUMI parameter values (timers) 18 6.9.1 Timer T1 18 6.9.2 Timer T2 18 7 Signalling protocol for the support of ANF-PUMO 19 7.1 ANF-PUMO descri

19、ption 19 7.2 ANF-PUMO operational requirements 19 7.2.1 Requirements on the Originating PINX 19 7.2.2 Requirements on the Home PINX 19 7.2.3 Requirements on a Transit PINX 19 7.3 ANF-PUMO coding requirements 19 7.3.1 Operations 19 7.3.2 Information elements 19 7.3.3 Messages 19 7.4 ANF-PUMO State de

20、finitions 20 7.4.1 States at the Originating PINX 20 - iii - 7.4.2 States at the Home PINX 20 7.5 ANF-PUMO signalling procedures 20 7.5.1 Actions at the Originating PINX 20 7.5.2 Actions at the Home PINX 20 7.5.3 Actions at the Transit PINX 21 7.6 ANF-PUMO impact of interworking with public ISDNs 21

21、 7.7 ANF-PUMO impact of interworking with non-ISDNs 21 7.8 Protocol interactions between ANF-PUMO and other supplementary services and ANFs 21 7.8.1 Interaction with Calling Name Identification Presentation (SS-CNIP) 22 7.8.2 Interaction with Connected Name Identification Presentation (SS-CONP) 22 7

22、.8.3 Interaction with Call Completion to Busy Subscriber (SS-CCBS) 22 7.8.4 Interaction with Call Completion on No Reply (SS-CCNR) 22 7.8.5 Interaction with Call Transfer (SS-WT) 22 7.8.6 Interaction with Call Diversion (SS-CFU, SS-CFB, SS-CFNR, SS-CD) 22 7.8.7 Interaction with Path Replacement (ANF

23、-PR) 22 7.8.8 Interaction with Call Offer (SS-CO) 22 7.8.9 Interaction with Call Intrusion (SS-CI) 22 7.8.10 Interaction with Do Not Disturb (SS-DND) 22 7.8.11 Interaction with Do Not Disturb Override (SS-DNDO) 22 7.8.12 Interaction with Advice of Charge (SS-AOC) 22 7.8.13 Interaction with Recall (S

24、S-RE) 22 7.8.14 Interaction with Call Interception (ANF-CINT) 22 7.8.15 Interaction with Transit Counter (ANF-TC) 22 7.8.16 Interaction with Route Restriction Class (ANF-RRC) 23 7.8.17 Interaction with Message Waiting Indication (SS-MWI) 23 7.8.18 Interaction with Wireless Terminal Location Registra

25、tion (SS-WTLR) 23 7.8.19 Interaction with Wireless Terminal Incoming Call (ANF-WTMI) 23 7.8.20 Interaction with Wireless Terminal Outgoing Call (ANF-WTMO) 23 7.8.21 Interaction with Wireless Terminal Authentication of the Terminal (SS-WTAT) 23 7.8.22 Interaction with Wireless Terminal Authentication

26、 of the Network (SS-WTAN) 23 7.8.23 Interaction with Private User Mobility Registration (ANF-PUMR) 23 7.8.24 Interaction with Private User Mobility Incoming Call (ANF-PUMI) 23 7.8.25 Interaction with Common Information (ANF-CMN) 23 7.8.26 Interaction with Call Priority Interruption (Protection) (SS-

27、CPI(P) 23 7.9 Parameter values (timers) 23 7.9.1 Timers at the Originating PINX 23 7.9.2 Timers at the Home PINX 23 Annex A - Protocol Implementation Conformance Statement (PICS) proforma 25 Annex B - Imported ASN.1 definitions 37 Annex C - Examples of Message Sequences 39 Annex D - Specification an

28、d Description Language (SDL) representation of procedures 45 - iv - Annex E - Additional feature identifier in module Common-Information-Operations 53 Annex F - ASN.1 definitions according to ITU-T Recs. X.208 / X.209 55 1 Scope This Standard specifies the signalling protocol for the support of the

29、Private User Mobility call handling additional network features (ANF-PUMI and ANF-PUMO) at the Q reference point between Private Integrated services Network eXchanges (PINX) connected together within a Private Integrated Services Network (PISN). ANF-PUMI is a feature that directs incoming calls to a

30、 PUM user within the PISN regardless of the PUM users geographical location within the PISN, provided that the PUM users location is known. ANF-PUMO permits the PISN to process call requests from a PUM user at the home location, if required. The Q reference point is defined in ECMA-133. Service spec

31、ifications are produced in three stages and according to the method specified in ITU-T Rec. I.130. This Standard contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ECMA-283. The signalling protocol for A

32、NF-PUMI and ANF-PUMO operates on top of the signalling protocol for basic circuit switched call control, as specified in ECMA-143, and uses certain aspects of the generic procedures for the control of supplementary services specified in ECMA-165. This Standard also specifies additional signalling pr

33、otocol requirements for the support of interactions at the Q reference point between ANF-PUMI / ANF-PUMO and other supplementary services and ANFs. This Standard is applicable to PINXs which can interconnect to form a PISN. 2 Conformance In order to conform to this Standard, a PINX shall satisfy the

34、 requirements identified in the Protocol Implementation Conformance Statement (PICS) proforma in annex A. 3 References (normative) The following standards contain provisions which, through reference in this text, constitute provision of this Standard. All standards are subject to revision, and parti

35、es to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. In the case of references to ECMA Standards that are aligned with ISO/IEC International Standards, the number of the appropriate ISO/IEC Intern

36、ational Standard is given in brackets after the ECMA reference. ECMA-133 Private Integrated Services Network (PISN) - Reference Configuration for PISN Exchanges (PINX) (International Standard ISO/IEC 11579-1) ECMA-142 Private Integrated Services Network (PISN) - Circuit Mode 64kbit/s Bearer Services

37、 - Service Description, Functional Capabilities and Information Flows (International Standard ISO/IEC 11574) ECMA-143 Private Integrated Services Network (PISN) - Circuit Mode Bearer Services - Inter-Exchange Signalling Procedures and Protocol (International Standard ISO/IEC 11572) ECMA-155 Private

38、Integrated Services Networks - Addressing (International Standard ISO/IEC 11571) ECMA-164 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Name Identification Supplementary Services (International Standard ISO/IEC 13868) ECMA-165 Private Integrated Services Network (

39、PISN) - Generic Functional Protocol for the Support of Supplementary Services - Inter-Exchange Signalling Procedures and Protocol (International Standard ISO/IEC 11582) ECMA-174 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Call Diversion Supplementary Services (I

40、nternational Standard ISO/IEC 13873) - 2 - ECMA-176 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Path Replacement Additional Network Feature (International Standard ISO/IEC 13874) ECMA-192 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Pro

41、tocol - Call Offer Supplementary Service (International Standard ISO/IEC 14843) ECMA-194 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Do Not Disturb and Do Not Disturb Override Supplementary Services (International Standard ISO/IEC 14844) ECMA-203 Private Integra

42、ted Services Network (PISN) - Inter-Exchange Signalling Protocol - Call Intrusion Supplementary Service (International Standard ISO/IEC 14846) ECMA-212 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Advice of Charge Supplementary Services (International Standard IS

43、O/IEC 15050) ECMA-221 Private integrated services network (PISN) - Inter-Exchange Signalling Protocol - Call Interception Additional Network Feature (International Standard ISO/IEC 15054) ECMA-225 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Transit Counter Addit

44、ional Network Feature (International Standard ISO/IEC 15056) ECMA-242 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Message Waiting Indication Supplementary Service (International Standard ISO/IEC 15506) ECMA-251 Private Integrated Services Network (PISN) - Inter-

45、Exchange Signalling Protocol - Common Information Additional Network Feature (International Standard ISO/IEC 15772) ECMA-264 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Call Priority Interruption and Call Priority Interruption Protection Supplementary Services (

46、International Standard ISO/IEC 15992) ECMA-281 Private Integrated Services Network (PISN) - Specification, Functional Model and Information Flows - Private User Mobility (PUM) - Registration Supplementary Service (International Standard ISO/IEC 17875) ECMA-282 Private Integrated Services Network (PI

47、SN) - Inter-Exchange Signalling Protocol - Private User Mobility (PUM) - Registration Supplementary Service (International Standard ISO/IEC 17876) ECMA-283 Private Integrated Services Network (PISN) - Specification, Functional Model and Information Flows - Private User Mobility (PUM) - Call Handling

48、 Additional Network Features (International Standard ISO/IEC 17877) ECMA-304 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Wireless Terminal Call Handling Additional Network Features (International Standard ISO/IEC 15431) ISO/IEC 13241 Information technology - Tel

49、ecommunications and information exchange between systems - Private Integrated Services Network - Inter-exchange signalling protocol - Route restriction class additional network feature (1997) ETS 300 415 Private Integrated Services Network (PISN); Terms and definitions (1996) ITU-T Rec. I.112 Vocabulary of terms for ISDN (1993) ITU-T Rec. I.130 Method for the characterization of telecommunication services supported by an ISDN and network capabilities of an ISDN (Blue Book) (1988) ITU-T Rec. I.210 Principles of telecommunication services supported by an ISDN and the means to describe