ETSI TS 131 121-2017 Universal Mobile Telecommunications System (UMTS) LTE UICC-terminal interface Universal Subscriber Identity Module (USIM) application test specification (V14 2.pdf

《ETSI TS 131 121-2017 Universal Mobile Telecommunications System (UMTS) LTE UICC-terminal interface Universal Subscriber Identity Module (USIM) application test specification (V14 2.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 131 121-2017 Universal Mobile Telecommunications System (UMTS) LTE UICC-terminal interface Universal Subscriber Identity Module (USIM) application test specification (V14 2.pdf（354页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 1Universal Mobile TelUICCUniversal Subscriber Id(3GPP TS 31.1TECHNICAL SPECIFICATION131 121 V13.5.0 (2017elecommunications System (LTE; CC-terminal interface; r Identity Module (USIM) applicspecification .121 version 13.5.0 Release 1317-02) (UMTS); lication test 13) ETSI ETSI TS 131 121 V13

2、.5.0 (2017-02)13GPP TS 31.121 version 13.5.0 Release 13Reference RTS/TSGC-0631121vd50 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la

3、Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document sha

4、ll not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI

5、Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present docum

6、ent, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by wri

7、tten permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UM

8、TSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ET

9、SI TS 131 121 V13.5.0 (2017-02)23GPP TS 31.121 version 13.5.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and

10、non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/).

11、Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present

12、 document. Foreword The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI ident

13、ities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verba

14、l forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 131 121 V13.5.0 (2017-02)33GPP TS 31.121 version 13.5.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3

15、Foreword . 19g3Introduction 19g31 Scope 20g32 References 20g33 Definitions, symbols, abbreviations and coding . 22g33.1 Definitions 22g33.2 Symbols 23g33.3 Abbreviations . 23g33.4 Coding Conventions . 25g33.5 Generic procedures for E-UTRAN/UTRAN/GERAN/IMS . 25g33.6 Applicability . 25g33.6.1 Applicab

16、ility of the present document 25g33.6.2 Applicability to terminal equipment . 25g33.6.3 Applicability of the individual tests 25g33.7 Table of optional features . 26g33.8 Applicability table 29g34 Default Values 43g34.1 Definition of default values for USIM-Terminal interface testing (Default UICC)

17、. 43g34.1.1 Values of the EFs (Default UICC) . 43g34.1.1.1 EFIMSI(IMSI) 43g34.1.1.2 EFAD(Administrative Data) 43g34.1.1.3 EFLOCI(Location Information) 43g34.1.1.4 EFKeys(Ciphering and Integrity Keys) 44g34.1.1.5 EFKeysPS(Ciphering and Integrity Keys for Packet Switched domain) 44g34.1.1.6 EFACC(Acce

18、ss Control Class) . 44g34.1.1.7 EFFPLMN(Forbidden PLMNs) 44g34.1.1.8 EFUST(USIM Service Table) 44g34.1.1.9 EFEST(Enable Service Table) 45g34.1.1.10 EFADN(Abbreviated Dialling Number) . 45g34.1.1.11 EFPLMNwACT(User Controlled PLMN Selector with Access Technology) 45g34.1.1.12 EFOPLMNwACT(Operator Con

19、trolled PLMN Selector with Access Technology) 46g34.1.1.13 Void. 46g34.1.1.14 PIN 46g34.1.1.15 PIN2 47g34.1.1.16 Unblock PIN . 47g34.1.1.17 Unblock PIN2 . 47g34.1.1.18 Other Values of the USIM 47g34.1.1.19 EFPSLOCI(Packet Switch Location Information) 47g34.1.1.20 Universal PIN 47g34.1.1.21 Unblock U

20、niversal PIN . 48g34.2 Definition of FDN UICC 48g34.2.1 Values of the EFs (FDN UICC) . 48g34.2.1.1 EFUST(USIM Service Table) 48g34.2.1.2 EFEST(Enable Service Table) 48g34.2.1.3 EFFDN(Fixed Dialling Numbers) 48g34.2.1.4 EFECC(Emergency Call Codes) . 49g34.2.1.5 Other Values of the USIM 49g34.3 Void 5

21、0g34.4 Definition of E-UTRAN/EPC UICC 50g3ETSI ETSI TS 131 121 V13.5.0 (2017-02)43GPP TS 31.121 version 13.5.0 Release 134.4.1 EFUST(USIM Service Table) 50g34.4.2 EFEPSLOCI(EPS Information) . 50g34.4.3 EFPLMNwACT(User Controlled PLMN Selector with Access Technology) 50g34.4.4 EFOPLMNwACT(Operator Co

22、ntrolled PLMN Selector with Access Technology) 51g34.4.5 EFACSGL(Allowed CSG Lists) . 52g34.4.6 EFCSGT(CSG Type) . 52g34.4.7 EFHNBN(Home (e)NodeB Name) 54g34.4.8 EFEPSNSC(EPS NAS Security Context) . 55g34.5 Definition of E-UTRAN/EPC ISIM-UICC 56g34.5.1 Applications on the E-UTRAN/EPC ISIM-UICC 56g34

23、.5.2 Default USIM values on E-UTRAN/EPC ISIM-UICC . 56g34.5.3 Default ISIM values on E-UTRAN/EPC ISIM-UICC 56g34.5.3.1 EFAD(Administrative Data) 56g34.5.3.2 EFIST(ISIM Service Table) . 56g34.5.3.3 EFIMPI(IMS private user identity) . 56g34.5.3.4 EFDOMAIN(Home Network Domain Name) . 57g34.5.3.5 EFIMPU

24、(IMS public user identity) . 57g34.5.3.6 EFP-CSCF(P-CSCF ADDRESS) . 58g34.5.3.7 EFSMS(Short Message Service) . 58g34.5.3.8 EFSMSR(Short message status reports) 58g34.5.3.9 EFSMSP(Short message service parameters) 59g34.5.3.10 EFSMSS(SMS Status) . 59g34.5.4 Default values at DF_TELECOM . 59g34.5.4.1

25、EFPSISMSC(Public Service Identity of the SM-SC) 59g34.6 Definition of ACSGL/OCSGL E-UTRAN/EPC UICC 60g34.6.1 EFUST(USIM Service Table) 60g34.6.2 EFAD(Administrative Data) 60g34.6.3 EFOCSGL(Operator CSG Lists) 60g34.6.4 EFOCSGT(Operator CSG Type) 61g34.6.5 EFOHNBN(Operator Home (e)NodeB Name) . 62g34

26、.7.1 Values of the EFs 64g34.7.1.1 EFUST(USIM Service Table) 64g34.7.1.2 EFNASCONFIG(Non Access Stratum Configuration) 64g35 Subscription related tests 71g35.1 IMSI / TMSI handling 71g35.1.1 UE identification by short IMSI . 71g35.1.1.1 Definition and applicability . 71g35.1.1.2 Conformance requirem

27、ent. 71g35.1.1.3 Test purpose 72g35.1.1.4 Method of test . 72g35.1.1.4.1 Initial conditions 72g35.1.1.4.2 Procedure . 72g35.1.1.5 Acceptance criteria 72g35.1.2 UE identification by short IMSI using a 2 digit MNC 72g35.1.2.1 Definition and applicability . 72g35.1.2.2 Conformance requirement. 73g35.1.

28、2.3 Test purpose 73g35.1.2.4 Method of test . 73g35.1.2.4.1 Initial conditions 73g35.1.2.4.2 Procedure . 74g35.1.2.5 Acceptance criteria 74g35.1.3 UE identification by “short“ TMSI . 74g35.1.3.1 Definition and applicability . 74g35.1.3.2 Conformance requirement. 74g35.1.3.3 Test purpose 74g35.1.3.4

29、Method of test . 75g35.1.3.4.1 Initial conditions 75g35.1.3.4.2 Procedure . 75g35.1.3.5 Acceptance criteria 75g35.1.4 UE identification by “long“ TMSI 76g35.1.4.1 Definition and applicability . 76g3ETSI ETSI TS 131 121 V13.5.0 (2017-02)53GPP TS 31.121 version 13.5.0 Release 135.1.4.2 Conformance req

30、uirement . 76g35.1.4.3 Test purpose 76g35.1.4.4 Method of test . 76g35.1.4.4.1 Initial conditions 76g35.1.4.4.2 Procedure . 77g35.1.4.5 Acceptance criteria 77g35.1.5 UE identification by long IMSI, TMSI updating and key set identifier assignment . 77g35.1.5.1 Definition and applicability . 77g35.1.5

31、.2 Conformance requirement. 78g35.1.5.3 Test purpose 78g35.1.5.4 Method of test . 78g35.1.5.4.1 Initial conditions 78g35.1.5.4.2 Procedure . 79g35.1.5.5 Acceptance criteria 80g35.1.6 UE identification by short IMSI when accessing E-UTRAN/EPC . 80g35.1.6.1 Definition and applicability . 80g35.1.6.2 C

32、onformance requirement . 80g35.1.6.3 Test purpose 81g35.1.6.4 Method of test . 81g35.1.6.4.1 Initial conditions 81g35.1.6.4.2 Procedure . 81g35.1.6.5 Acceptance criteria 81g35.1.7 UE identification by short IMSI using a 2 digit MNC when accessing E-UTRAN/EPC . 81g35.1.7.1 Definition and applicabilit

33、y . 81g35.1.7.2 Conformance requirement . 81g35.1.7.3 Test purpose 82g35.1.7.4 Method of test . 82g35.1.7.4.1 Initial conditions 82g35.1.7.4.2 Procedure . 82g35.1.7.5 Acceptance criteria 82g35.1.8 UE identification after changed IMSI with service “EMM Information“ not available . 83g35.1.8.2 Conform

34、ance requirement . 83g35.1.8.3 Test purpose 83g35.1.8.4 Method of test . 83g35.1.8.4.1 Initial conditions 83g35.1.8.4.2 Procedure . 83g35.1.8.5 Acceptance criteria 84g35.1.9 UE identification by GUTI when using USIM with service “EMM Information“ not available 84g35.1.9.2 Conformance requirement . 8

35、4g35.1.9.3 Test purpose 85g35.1.9.4 Method of test . 85g35.1.9.4.1 Initial conditions 85g35.1.9.4.2 Procedure . 85g35.1.9.5 Acceptance criteria 85g35.1.10 UE identification by GUTI when using USIM with service “EMM Information“ available 85g35.1.10.1 Definition and applicability . 85g35.1.10.2 Confo

36、rmance requirement . 86g35.1.10.3 Test purpose 86g35.1.10.4 Method of test . 86g35.1.10.4.1 Initial conditions 86g35.1.10.4.2 Procedure . 86g35.1.10.5 Acceptance criteria 87g35.2 Access Control handling 87g35.2.1 Access Control information handling . 87g35.2.1.1 Definition and applicability . 87g35.

37、2.1.2 Conformance requirement. 87g35.2.1.3 Test purpose 88g35.2.1.4 Method of test . 88g35.2.1.4.1 Initial conditions 88g35.2.1.4.2 Coding details 88g35.2.1.4.3 Procedure . 89g35.2.1.5 Acceptance criteria 89g3ETSI ETSI TS 131 121 V13.5.0 (2017-02)63GPP TS 31.121 version 13.5.0 Release 135.2.2 Access

38、 Control information handling for E-UTRAN/EPC . 101g35.2.2.1 Definition and applicability . 101g35.2.2.2 Conformance requirement. 101g35.2.2.3 Test purpose 101g35.2.2.4 Method of test . 101g35.2.2.4.1 Initial conditions 101g35.2.2.4.2 Coding details 102g35.2.2.4.3 Procedure . 102g35.2.2.5 Acceptance

39、 criteria 102g36 Security related Tests . 114g36.1 PIN handling 114g36.1.1 Entry of PIN 114g36.1.1.1 Definition and applicability . 114g36.1.1.2 Conformance requirement. 114g36.1.1.3 Test purpose 114g36.1.1.4 Method of test . 114g36.1.1.4.1 Initial conditions 114g36.1.1.4.2 Procedure . 114g36.1.1.5

40、Acceptance criteria 114g36.1.2 Change of PIN 115g36.1.2.1 Definition and applicability . 115g36.1.2.2 Conformance requirement. 115g36.1.2.3 Test purpose 115g36.1.2.4 Method of test . 115g36.1.2.4.1 Initial conditions 115g36.1.2.4.2 Procedure . 115g36.1.2.5 Acceptance criteria 115g36.1.3 Unblock PIN

41、. 116g36.1.3.1 Definition and applicability . 116g36.1.3.2 Conformance requirement. 116g36.1.3.3 Test purpose 116g36.1.3.4 Method of test . 116g36.1.3.4.1 Initial conditions 116g36.1.3.4.2 Procedure . 116g36.1.3.5 Acceptance criteria 117g36.1.4 Entry of PIN2 117g36.1.4.1 Definition and applicability

42、 . 117g36.1.4.2 Conformance requirement. 117g36.1.4.3 Test purpose 117g36.1.4.4 Method of test . 117g36.1.4.4.1 Initial conditions 117g36.1.4.4.2 Procedure . 118g36.1.4.5 Acceptance criteria 118g36.1.5 Change of PIN2 118g36.1.5.1 Definition and applicability . 118g36.1.5.2 Conformance requirement. 1

43、18g36.1.5.3 Test purpose 118g36.1.5.4 Method of test . 118g36.1.5.4.1 Initial conditions 118g36.1.5.4.2 Procedure . 118g36.1.5.5 Acceptance criteria 119g36.1.6 Unblock PIN2 . 119g36.1.6.1 Definition and applicability . 119g36.1.6.2 Conformance requirement. 119g36.1.6.3 Test purpose 119g36.1.6.4 Meth

44、od of test . 119g36.1.6.4.1 Initial conditions 119g36.1.6.4.2 Procedure . 119g36.1.6.5 Acceptance criterias 120g36.1.7 Replacement of PIN 121g36.1.7.1 Definition and applicability . 121g3ETSI ETSI TS 131 121 V13.5.0 (2017-02)73GPP TS 31.121 version 13.5.0 Release 136.1.7.2 Conformance requirement .

45、121g36.1.7.3 Test purpose 121g36.1.7.4 Method of test . 121g36.1.7.4.1 Initial conditions 121g36.1.7.4.2 Procedure . 121g36.1.7.5 Acceptance criteria 121g36.1.8 Change of Universal PIN 122g36.1.8.1 Definition and applicability . 122g36.1.8.2 Conformance requirement. 122g36.1.8.3 Test purpose 122g36.

46、1.8.4 Method of test . 122g36.1.8.4.1 Initial conditions 122g36.1.8.4.2 Procedure . 122g36.1.8.5 Acceptance criteria 123g36.1.9 Unblock Universal PIN . 123g36.1.9.1 Definition and applicability . 123g36.1.9.2 Conformance requirement. 123g36.1.9.3 Test purpose 123g36.1.9.4 Method of test . 123g36.1.9

47、.4.1 Initial conditions 123g36.1.9.4.2 Procedure . 123g36.1.9.5 Acceptance criteria 124g36.1.10 Entry of PIN on multi-verification capable UICCs . 124g36.1.10.1 Definition and applicability . 124g36.1.10.2 Conformance requirement. 124g36.1.10.3 Test purpose 124g36.1.10.4 Method of test . 124g36.1.10

48、.4.1 Initial conditions 124g36.1.10.4.2 Procedure . 125g36.1.10.5 Acceptance criteria 125g36.1.11 Change of PIN on multi-verification capable UICCs . 125g36.1.11.1 Definition and applicability . 125g36.1.11.2 Conformance requirement. 125g36.1.11.3 Test purpose 126g36.1.11.4 Method of test . 126g36.1

49、.11.4.1 Initial conditions 126g36.1.11.4.2 Procedure . 126g36.1.11.5 Acceptance criteria 127g36.1.12 Unblock PIN on multi-verification capable UICCs 127g36.1.12.1 Definition and applicability . 127g36.1.12.2 Conformance requirement. 127g36.1.12.3 Test purpose 127g36.1.12.4 Method of test . 127g36.1.12.4.1 Initial conditions 127g36.1.12.4.2 Procedure . 128g36.1.12.5 Acceptance criteria 129g36.1.13 Entry of PIN2 on multi-verification capable UICCs . 129g36.1.13.1 Definition and applicability . 129g36.1.13.2 Conformance requirement. 129g36.1.13.3 Test purpose 129g36.1.13.4 Met