EN 61753-086-2-2009 en Fibre optic interconnecting devices and passive components performance standard - Part 086-2 Non-connectorised single-mode bidirectional 1490 1550 nm downst.pdf

《EN 61753-086-2-2009 en Fibre optic interconnecting devices and passive components performance standard - Part 086-2 Non-connectorised single-mode bidirectional 1490 1550 nm downst.pdf》由会员分享，可在线阅读，更多相关《EN 61753-086-2-2009 en Fibre optic interconnecting devices and passive components performance standard - Part 086-2 Non-connectorised single-mode bidirectional 1490 1550 nm downst.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationFibre optic interconnectingdevices and passive componentsperformance standard Part 086-2: Non-connectorised single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream W

2、WDM devices for category C Controlled environmentBS EN 61753-086-2: 2009National forewordThis British Standard is the UK implementation of EN 61753-086-2:2009. It isidentical to IEC 61753-086-2:2009.The UK participation in its preparation was entrusted by Technical CommitteeGEL/86, Fibre optics, to

3、Subcommittee GEL/86/2, Fibre optic interconnectingdevices and passive components.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its corr

4、ect application. BSI 2010ISBN 978 0 580 59256 0ICS 33.180.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 January 2010Amendments issued since publicationAmd.

5、No. Date Text affectedBRITISH STANDARDBS EN 61753-086-2:2009EUROPEAN STANDARD EN 61753-086-2 NORME EUROPENNE EUROPISCHE NORM November 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung

6、Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61753-086-2:2009 E ICS 33.180.10 English version Fibre optic interconnecting devices and passive components performance

7、standard - Part 086-2: Non-connectorised single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C - Controlled environment (IEC 61753-086-2:2009) Norme de qualit de fonctionnement des dispositifs dinterconnexion et composants passifs fibres optiques - Partie 0

8、86-2: Dispositifs WWDM unimodaux non connectoriss bidirectionnels 1490 / 1550 nm en voie descendante et 1310 nm en voie montante fonctionnant en catgorie C - Environnement contrl (CEI 61753-086-2:2009) Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 086-2: Nic

9、ht mit Steckverbindern versehene bidirektionale 1 490/1 550-nm-downstream- 1 310-nm-upstream-Einmoden-WWDM-Bauteile fr die Kategorie C - Kontrollierte Umgebung (IEC 61753-086-2:2009) This European Standard was approved by CENELEC on 2009-11-01. CENELEC members are bound to comply with the CEN/CENELE

10、C Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN

11、ELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions

12、. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Sl

13、ovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61753-086-2:2009EN 61753-086-02:2009 - 2 - Foreword The text of document 86B/2892/FDIS, future edition 1 of IEC 61753-086-2, prepared by SC 86B, Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre

14、optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-086-2 on 2009-11-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-08-01

15、latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2012-11-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61753-086-2:2009 was approved by CENELEC as a European Standard without any modification. In t

16、he official version, for Bibliography, the following note has to be added for the standard indicated: IEC 62074-1 NOTE Harmonized as EN 62074-1:2009 (not modified). _ BS EN 61753-086-2:2009- 3 - EN 61753-086-2:2009 Annex ZA (normative) Normative references to international publications with their co

17、rresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an in

18、ternational publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60793-2-50 -1)Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres EN 60793-2-50 20082)IEC 6

19、1300 Series Fibre optic interconnecting devices and passive components - Basic test and measurement procedures EN 61300 Series IEC 61300-2-1 -1)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 2

20、0092)IEC 61300-2-4 -1)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 19972)IEC 61300-2-9 -1)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -

21、Part 2-9: Tests - Shock EN 61300-2-9 19972)IEC 61300-2-14 -1)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - Optical power handling and damage threshold characterization EN 61300-2-14 + corr. November 20062)2006 IEC 61300-2-17 -

22、1)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold EN 61300-2-17 20032)IEC 61300-2-18 -1)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High

23、 temperature endurance EN 61300-2-18 20052)IEC 61300-2-19 -1)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 20052)1)Undated reference. 2)Valid edition at date of issue. BS EN 61753-086-2:2

24、009EN 61753-086-02:2009 - 4 - Publication Year Title EN/HD Year IEC 61300-2-22 -1)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature EN 61300-2-22 20072)IEC 61300-2-42 -1)Fibre optic interconnecting devices an

25、d passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for connectors EN 61300-2-42 20052)IEC 61300-2-44 -1)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief

26、 of fibre optic devices EN 61300-2-44 20082)IEC 61300-3-2 -1)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polarization dependent loss in a single-mode fibre optic device EN 61300-3-2 20092)IEC 61300-3-6

27、 -1)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss EN 61300-3-6 20092)IEC 61300-3-7 -1)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part

28、 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components EN 61300-3-7 20012)IEC 61300-3-20 -1)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements - Di

29、rectivity of fibre optic branching devices EN 61300-3-20 + corr. March 20012)2002 IEC 61300-3-29 -1)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Measurement techniques for characterising the amplitude

30、of the spectral transfer function of DWDM components EN 61300-3-29 + corr. November 20062)2006 IEC 61753-1 -1)Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards EN 61753-1 20072)BS EN 61753-086-2:2009 2 61753-086-2

31、 IEC:2009(E) CONTENTS 1 Scope.5 2 Normative references .5 3 Test6 4 Test report6 5 Performance requirements .7 5.1 Reference components7 5.2 Dimensions .7 5.3 Sample size 7 5.4 Test details and requirements .7 Annex A (normative) Sample size 12 Annex B (informative) General information for 1490 / 15

32、50 nm downstream and 1310 nm upstream PON WWDM devices 13 Bibliography14 Figure B.1 Example of 1490 / 1550 nm downstream and 1310 nm upstream WWDM at central office and customer side Separate video detection inside the ONU 13 Figure B.2 Example of 1490 / 1550 nm downstream and 1310 nm upstream WWDM

33、at central office side Integrated video detection inside the ONU.13 Table 1 Test details and requirements .7 Table A.1 Sample size .12 BS EN 61753-086-2:200961753-086-2 IEC:2009(E) 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 086-2: Non-connectorized single-

34、mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category C Controlled environment 1 Scope This part of IEC 61753 contains the minimum initial performance, test and measurement requirements and severities which a fibre optic pigtailed 1 490 / 1 550 nm downstream

35、and 1 310 nm upstream wide wavelength division multiplexing (WWDM) passive optical network (PON) device must satisfy in order to be categorized as meeting the requirements of category C (controlled environments), as defined in Annex A of IEC 61753-1. Annex B of this standard provides information con

36、cerning the function of the 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of th

37、e referenced document (including any amendments) applies. IEC 60793-2-50, Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres IEC 61300 (all parts), Fibre optic interconnecting devices and passive components Basic test and measurement procedures IE

38、C 61300-2-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal) IEC 61300-2-4, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-4: Tests Fibre/cable retention I

39、EC 61300-2-9, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-9: Tests Shock IEC 61300-2-14, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-14: Tests Optical power handling and damage thr

40、eshold characterization IEC 61300-2-17, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-17: Tests Cold IEC 61300-2-18, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18: Tests Dry heat Hi

41、gh temperature endurance IEC 61300-2-19, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-19: Tests Damp heat (steady state) BS EN 61753-086-2:2009 6 61753-086-2 IEC:2009(E) IEC 61300-2-22, Fibre optic interconnecting devices and passive compone

42、nts Basic test and measurement procedures Part 2-22: Tests Change of temperature IEC 61300-2-42, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-42: Tests Static side load for connectors IEC 61300-2-44, Fibre optic interconnecting devices and p

43、assive components Basic test and measurement procedures Part 2-44: Tests Flexing of the strain relief of fibre optic devices IEC 61300-3-2, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-2: Examinations and measurements Polarization dependence

44、 of attenuation in a single-mode fibre optic device IEC 61300-3-6, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-6: Examinations and measurements Return loss IEC 61300-3-7, Fibre optic interconnecting devices and passive components Basic test

45、 and measurement procedures Part 3-7: Wavelength dependence of attenuation and return loss IEC 61300-3-20, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-20: Examinations and measurements Directivity of fibre optic branching devices IEC 61300-

46、3-29, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-29: Examinations and measurements Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components IEC 61753-1, Fibre optic interconnecting device

47、s and passive components performance standard Part 1: General and guidance for performance standard 3 Test Unless otherwise specified, all test methods are in accordance with the relevant part of IEC 61300 series. Each test defines the number of samples to be evaluated. The samples used for each tes

48、t are intended to be previously unstressed new samples but may also be selected from previously used samples if desired. The samples shall be terminated onto single-mode fibres as per IEC 60793-2-50, Type B 1.1, in either coated fibres (primary and secondary) or reinforced cable format. All measurem

49、ents shall be carried out at normal room conditions, unless otherwise stated. All tests shall be carried out over the optical wavelength bands of 1 260 nm to 1 360 nm, 1 480 nm to 1 500 nm, and 1 550 nm to 1 560 nm, unless otherwise specified. NOTE 1 310 nm, 1 490 nm and 1 550 nm are the peak or centre wavelengths, stated for the bands 1 260 nm to 1 360 nm, 1 480 nm to 1 500 nm and 1 550 nm to 1 560 nm.