DLA SMD-5962-87635 REV B-2002 MICROCIRCUIT LINEAR 8-BIT A D CONVERTER WITH INPUT AMPLIFIER MONOLITHIC SILICON《硅单块 带输入扩大器8比特交直流转换器 直线型微型电路》.pdf

《DLA SMD-5962-87635 REV B-2002 MICROCIRCUIT LINEAR 8-BIT A D CONVERTER WITH INPUT AMPLIFIER MONOLITHIC SILICON《硅单块 带输入扩大器8比特交直流转换器 直线型微型电路》.pdf》由会员分享，可在线阅读，更多相关《DLA SMD-5962-87635 REV B-2002 MICROCIRCUIT LINEAR 8-BIT A D CONVERTER WITH INPUT AMPLIFIER MONOLITHIC SILICON《硅单块 带输入扩大器8比特交直流转换器 直线型微型电路》.pdf（15页珍藏版）》请在麦多课文档分享上搜索。

1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Make changes to table I, 1.4, figure 1 and throughout. Add a new figure to the drawing. Editorial changes throughout. 90-03-06 M. A. FRYE B Drawing updated to reflect current requirements. - ro 02-08-20 R. MONNIN THE ORIGINAL FIRST SHEET OF THIS

2、DRAWING HAS BEEN REPLACED. REV SHET REV SHET REV STATUS REV B B B B B B B B B B B B B B OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPARED BY RICK C. OFFICER DEFENSE SUPPLY CENTER COLUMBUS STANDARD MICROCIRCUIT DRAWING CHECKED BY CHARLES E. BESORE COLUMBUS, OHIO 43216 http:/www.dscc.

3、dla.mil THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS APPROVED BY MICHAEL A. FRYE MICROCIRCUIT, LINEAR, 8-BIT A/D CONVERTER WITH INPUT AMPLIFIER, MONOLITHIC SILICON AND AGENCIES OF THE DEPARTMENT OF DEFENSE DRAWING APPROVAL DATE 88-11-23 AMSC N/A REVISION LEVEL B SIZE A CAGE CODE 67268 5962-8

4、7635 SHEET 1 OF 14 DSCC FORM 2233 APR 97 5962-E543-02 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87635 DEFENSE SUPPLY CENT

5、ER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL B SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A. 1.2 Part or Identifying Number (PIN). The c

6、omplete PIN is as shown in the following example: 5962-87635 01 R X Drawing number Device type (see 1.2.1) Case outline (see 1.2.2) Lead finish (see 1.2.3) 1.2.1 Device type(s). The device type(s) identify the circuit function as follows: Device type Generic number Circuit function 01 AD670 8-bit A/

7、D converter with input amplifier 1.2.2 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style R GDIP1-T20 or CDIP2-T20 20 Dual-in-line 1.2.3 Lead finish. The lead finish is as specified in MIL-PRF-38535, ap

8、pendix A. 1.3 Absolute maximum ratings. VCCto ground 0 V dc to +7.5 V dc Digital inputs: BPO/UPO , FORMAT, R/ W , CS , CE pins -0.5 V dc to VCC+0.5 V dc Digital outputs: DB0 DB7, STATUS OUTPUT pins . Momentary short to VCCor ground Analog inputs: VIN-(HIGH), VIN-(LOW), VIN+(HIGH), VIN+(LOW) pins -30

9、 V dc to +30 V dc Power dissipation (PD) . 450 mW Storage temperature range -65C to +150C Lead temperature (soldering, 10 seconds) +300C Thermal resistance, junction-to-case (JC) See MIL-STD-1835 Thermal resistance, junction-to-ambient (JA) . 85C/W 1.4 Recommended operating conditions. Supply voltag

10、e range (VCC) . 4.75 V dc to 5.5 V dc Operating ambient temperature range (TA) -55C to +125C Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87635 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVI

11、SION LEVEL B SHEET 3 DSCC FORM 2234 APR 97 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are t

12、hose listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation. SPECIFICATION DEPARTMENT OF DEFENSE MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. STANDARDS DEPARTMENT OF DEFENSE M

13、IL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. HANDBOOKS DEPARTMENT OF DEFENSE MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Unless otherwise indicated, copies of the spec

14、ification, standards, and handbooks are available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawin

15、g takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B dev

16、ices and as specified herein. Product built to this drawing that is produced by a Qualified Manufacturer Listing (QML) certified and qualified manufacturer or a manufacturer who has been granted transitional certification to MIL-PRF-38535 may be processed as QML product in accordance with the manufa

17、cturers approved program plan and qualifying activity approval in accordance with MIL-PRF-38535. This QML flow as documented in the Quality Management (QM) plan may make modifications to the requirements herein. These modifications shall not affect form, fit, or function of the device. These modific

18、ations shall not affect the PIN as described herein. A “Q“ or “QML“ certification mark in accordance with MIL-PRF-38535 is required to identify when the QML flow option is used. 3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified

19、 in MIL-PRF-38535, appendix A and herein. 3.2.1 Case outline. The case outline shall be in accordance with 1.2.2 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1. 3.2.3 Truth tables. The truth tables shall be as specified on figures 2, 3, and 4. 3.2.4 Bl

20、ock diagram. The block diagram shall be as specified on figure 5. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87635 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL B SHEET 4 DSCC F

21、ORM 2234 APR 97 3.3 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance characteristics are as specified in table I and shall apply over the full ambient operating temperature range. 3.4 Electrical test requirements. The electrical test requirements

22、shall be the subgroups specified in table II. The electrical tests for each subgroup are described in table I. 3.5 Marking. Marking shall be in accordance with MIL-PRF-38535, appendix A. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked

23、 as listed in MIL-HDBK-103 (see 6.6 herein). For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device. 3.5.1 Certification/compliance mark. A compliance indicator “C” shall be marked on

24、all non-JAN devices built in compliance to MIL-PRF-38535, appendix A. The compliance indicator “C” shall be replaced with a “Q“ or “QML“ certification mark in accordance with MIL-PRF-38535 to identify when the QML flow option is used. 3.6 Certificate of compliance. A certificate of compliance shall

25、be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6 herein). The certificate of compliance submitted to DSCC-VA prior to listing as an approved source of supply shall affirm that the manufacturers product meets the requirements of MIL-PRF-38

26、535, appendix A and the requirements herein. 3.7 Certificate of conformance. A certificate of conformance as required in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing. 3.8 Notification of change. Notification of change to DSCC-VA shall be requir

27、ed in accordance with MIL-PRF-38535, appendix A. 3.9 Verification and review. DSCC, DSCCs agent, and the acquiring activity retain the option to review the manufacturers facility and applicable required documentation. Offshore documentation shall be made available onshore at the option of the review

28、er. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87635 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL B SHEET 5 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristic

29、s. Test Symbol Conditions -55C TA +125C VCC= +5 V Group A subgroups Device type Limits Unit unless otherwise specified Min Max Relative accuracy 1/ RA 1 01 1 / 2 LSB 2,3 1 Differential 2/ 3/ nonlinearity DNL 1,2,3 01 8 Bits Gain error 1/ AE 1 01 1.5 LSB 2,3 2.5 Unipolar offset error OE 0 V to +2.56

30、V input range FS 1 01 1 LSB 2,3 2 Bipolar offset error BOE-1.28 V to +1.27 V FS 1 01 1 LSB 2,3 2 Input resistance 3/ RIN2.55 V input range 1 01 8 12 k Input bias current 3/ IB255 mV input range 1,2,3 01 500 nA Input offset current 3/ IOS255 mV input range 1,2,3 01 200 nA Absolute input 3/ 4/ 5/ sign

31、al range VABSLow range 1 01 -0.34 VCC- 3.3 V 2,3 -0.15 VCC- 3.5 High range 1 -3.4 VCC2,3 -1.5 VCCPower supply rejection ratio PSRR 2.55 V FS, VCC= +4.75 V to +5.5 V 1,2,3 01 0.015 %FS / % See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without lice

32、nse from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87635 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL B SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics Continued. Test Symbol Conditions -55C TA +125C VCC= +5 V Group A subgroups Device

33、type Limits Unit unless otherwise specified Min Max Power supply current ICCVCC= 5.5 V, (DB0 DB7, R/ W high); 1,2,3 01 45 mA (STATUS, CE , CS , FORMAT, BPO, UPO - low) Digital input high 3/ voltage VIH1,2,3 01 2.0 V Digital input low 3/ voltage VIL1 01 0.8 V 2,3 0.7 Digital input high 3/ current IIH

34、VIH= 5 V 1,2,3 01 100 A Digital input low 3/ current IILVIL= 0 V 1,2,3 01 -100 A Digital output low voltage VOLIOL= 1.6 mA, VCC= 5.5 V 1,2,3 01 0.4 V Digital output high voltage VOHIOH= 0.5 mA, VCC= 4.5 V 1,2,3 01 2.4 V Digital output low current IOLVOL= 0.4 V, VCC= 5.5 V 1,2,3 01 -1.6 mA Digital ou

35、tput high current IOHVOL= 2.4 V, VCC= 4.5 V 1,2,3 01 0.5 mA Common mode 3/ rejection ratio CMRR VCM= -0.15 V to 1 01 1 LSB VCC 3.8 V 2,3 2 Three-state leakage 3/ current IOZVapplied= 5 V, Vapplied= 0 V 1,2,3 01 40 A Functional tests See 4.3.1c 7,8 01 Bus access time 3/ tTDRL= 3 k, CL= 90 pF, see fig

36、ure 5, TA= +25C 9 01 250 ns See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87635 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL B SHEET 7 DSCC FORM 223

37、4 APR 97 TABLE I. Electrical performance characteristics Continued. Test Symbol Conditions -55C TA +125C VCC= +5 V Group A subgroups Device type Limits Unit unless otherwise specified Min Max Output float delay 3/ tDTRL= 3 k, see figure 5, TA= +25C 9 01 150 ns Write / start pulse width 3/ tWRL= 3 k,

38、 CL= 90 pF, 6/ see figure 6, TA= +25C 9 01 300 ns Input data setup time tDSRL= 3 k, CL= 90 pF, 6/ see figure 6, TA= +25C 9 01 200 ns Input data hold time tDHRL= 3 k, CL= 90 pF, 6/ see figure 6, TA= +25C 9 01 10 ns R/ W setup before control tRWCRL= 3 k, CL= 90 pF, 6/ see figure 6, TA= +25C 9 01 0 ns

39、Delay to convert start tDCRL= 3 k, CL= 90 pF, 6/ see figure 6, TA= +25C 9 01 700 ns Delay from STATUS OUTPUT to data read tSDRL= 3 k, CL= 90 pF, 6/ see figure 6, TA= +25C 9 01 250 ns Data hold time tDHRL= 3 k, CL= 90 pF, 6/ see figure 6, TA= +25C 9 01 25 ns Conversion time 3/ tCVCC= +5 V 9 01 10 s 1

40、0,11 7/ 13 1/ Tested on both 2.55 V full scale and 1.28 V to 1.27 V full scale. 2/ Minimum resolution for which there are no missing codes. 3/ Parameter is tested at VCC= 5 V but is guaranteed from VCC= 4.5 V to VCC= 5.5 V. 4/ The absolute input signal range defines the limits of input signal value

41、from either the (+) or (-) input to ground (as a function of VCC) over which the device will produce distinct output codes. 5/ The differential input signal range defines the input signal span over which distinct output codes are produced. As this range is exceeded, the device ceases to change outpu

42、t state (see figure 4). 6/ Guaranteed, if not tested, to the limits specified in table I herein. 7/ 255 mV range. CMRR tested with 0 V and full scale applied to analog inputs output change measured from 0 to VCMmaximum and 0 to VCMminimum and will not exceed specified limits. Provided by IHSNot for

43、ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87635 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL B SHEET 8 DSCC FORM 2234 APR 97 Device type 01 Case outline R Terminal number Terminal symbol 1 DB0 (LSB)

44、 2 DB1 3 DB2 4 DB3 5 DB4 6 DB5 7 DB6 8 DB7 (MSB) 9 STATUS OUTPUT 10 POWER GROUND 11 BPO/ UPO 12 FORMAT (SEE NOTE) 13 R/ W 14 CS 15 CE 16 VIN-(HIGH) 17 VIN-(LOW) 18 VIN+(HIGH) 19 VIN+(LOW) 20 VCCNOTE: Twos complement / binary straight FIGURE 1. Terminal connections. Provided by IHSNot for ResaleNo re

45、production or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87635 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL B SHEET 9 DSCC FORM 2234 APR 97 R/ W CS CE Operation Output X X X Converting (see note 1) Three-state 0 0 0 Write/co

46、nvert (see note 2) Three-state 1 0 0 Read (see note 2) Data valid X X 1 None (see note 3) Three-state X 1 X None (see note 3) Three-state NOTES: 1. Status output high. 2. Status output low. 3. Status output dont care. FIGURE 2. Control signal truth table Mode Range Min Max Unit Unipolar Low 0 255 mV

47、 Unipolar High 0 2.55 V Bipolar Low -128 127 mV Bipolar High -1.28 1.27 V FIGURE 3. Differential input signal range truth table. BPO/ UPO FORMAT Input range / output format 0 0 Unipolar / straight binary 1 0 Bipolar / offset binary 0 1 Unipolar / 2s complement 1 1 Bipolar / 2s complement FIGURE 4. I

48、nput selection / output format truth table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87635 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL B SHEET 10 DSCC FORM 2234 APR 97 FIGURE 5. Block diagram. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87635 D