DIN EN 565-2007 Mountaineering equipment - Tape - Safety requirements and test methods English version of DIN EN 565 2007-03《登山器械 登山带 安全性要求和试验方法》.pdf

《DIN EN 565-2007 Mountaineering equipment - Tape - Safety requirements and test methods English version of DIN EN 565 2007-03《登山器械 登山带 安全性要求和试验方法》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 565-2007 Mountaineering equipment - Tape - Safety requirements and test methods English version of DIN EN 565 2007-03《登山器械 登山带 安全性要求和试验方法》.pdf（11页珍藏版）》请在麦多课文档分享上搜索。

1、March 2007DEUTSCHE NORM English price group 8No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 97.220.40!,wDc“9843364www

2、.din.deDDIN EN 565Mountaineering equipment Tape Safety requirements and test methodsEnglish version of DIN EN 565:2007-03Bergsteigerausrstung Band Sicherheitstechnische Anforderungen und PrfverfahrenEnglische Fassung DIN EN 565:2007-03SupersedesDIN EN 565:1997-04www.beuth.deDocument comprises 11 pag

3、es07.07DIN EN 565:2007-03 2 Start of validity This standard is valid from 01 March 2007. National foreword This standard includes safety requirements within the meaning of the Gerte- und Produktsicherheitsgesetz (German Equipment and Consumer Goods Safety Law). This standard has been prepared by CEN

4、/TC 136 “Sports, playground and other recreational equipment” (Secretariat: Germany). The responsible German body involved in its preparation was the Normenausschuss Sport- und Freizeitgert (Sports Equipment Standards Committee), Technical Committee NA 112-04-05 AA Bergsteigerausrstung. Tapes as spe

5、cified in this standard fall within the scope of the Gerte- und Produktsicherheitsgesetz. Once compliance with the safety requirements specified in article 7 has been verified by an accredited test house, the equipment may be marked with the symbol GS (= geprfte Sicherheit, safety tested). Amendment

6、s This standard differs from DIN EN 565:1997-04 as follows: a) A requirement has been specified for tape supplied on a drum and consisting of more than one piece. b) The new rules for drawing up European Standards have been taken into consideration. c) The list of standards on mountaineering equipme

7、nt has been updated. Previous editions DIN 32916: 1985-09 DIN EN 565: 1993-01, 1997-04 EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 565December 2006ICS 97.220.40 Supersedes EN 565:1997 English VersionMountaineering equipment - Tape - Safety requirements andtest methodsEquipement dalpinisme et d

8、escalade - Sangle - Exigencesde scurit et mthodes dessaiBergsteigerausrstung - Band - SicherheitstechnischeAnforderungen und PrfverfahrenThis European Standard was approved by CEN on 25 October 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditi

9、ons for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three offic

10、ial versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belg

11、ium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZAT

12、IONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 565:2006: EEN 565:2006 (E) 2 Contents Page Foreword3 Introduct

13、ion .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .5 4 Safety requirements 5 4.1 Stability .5 4.2 Tensile strength .5 4.3 Packaging .5 4.4 Mass per unit length5 5 Test methods6 5.1 Test samples 6 5.2 Conditioning.6 5.3 Stability .6 5.4 Determination of tensile strength 6 5.5 Determin

14、ation of mass per unit length6 6 Marking .7 7 Information supplied by the manufacturer .7 Annex A (informative) Standards on mountaineering equipment8 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC.9 EN 565:2006 (E) 3 Fore

15、word This document (EN 565:2006) has been prepared by Technical Committee CEN/TC 136 “Sports, playground and other recreational equipment”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or

16、by endorsement, at the latest by June 2006, and conflicting national standards shall be withdrawn at the latest by June 2006. This document supersedes EN 565:1997. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to suppo

17、rt Essential Requirements of EU Directive 89/686/EEC. For relationship with EU Directives, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement t

18、his European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-bourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer-land and United Ki

19、ngdom. EN 565:2006 (E) 4 Introduction The text of this European Standard is based on the former UIAA-Standard H (Union Internationale des Asso-ciations dAlpinisme), which has been developed with international participation. This European Standard is one of a package of standards for mountaineering e

20、quipment, see Annex A. EN 565:2006 (E) 5 1 Scope This European Standard specifies safety requirements and test methods for tape supplied on drums or in separate lengths, for use in mountaineering including climbing. 2 Normative references The following referenced documents are indispensable for the

21、application of this document. For dated refer-ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 139, Textiles Standard atmospheres for conditioning and testing (ISO 139:2005) EN ISO 2307:2005, Fibre

22、 ropes Determination of certain physical and mechanical properties (ISO 2307:2005) 3 Terms and definitions For the purposes of this document, the following term and definition applies. 3.1 tape long, narrow, flat textile structure intended to withstand forces, but not intended to absorb energy 4 Saf

23、ety requirements 4.1 Stability When shuttleless loom webbing is used, the weft shall be locked by an additional locking thread or by any other system, which guarantees that the edges cannot be unravelled when one of the yarns breaks. 4.2 Tensile strength When tested in accordance with 5.4, the tensi

24、le strength of tape shall be at least 5 kN. It shall be possible to read the tensile strength from the continuous tape (see 6.2). 4.3 Packaging If the tape is supplied on a drum and consists of more than one piece, the ends of the pieces shall be clearly visible and not joined together. No testing r

25、equired. 4.4 Mass per unit length This mass shall be given as information according to 7 d). EN 565:2006 (E) 6 5 Test methods 5.1 Test samples 5.1.1 Carry out the test described in 5.3 on one test sample. 5.1.2 Carry out the tests described in 5.4 on one test sample. 5.1.3 Carry out the test describ

26、ed in 5.5 on one test sample. 5.2 Conditioning Condition the test samples as described in EN ISO 139. Carry out the test at a relative humidity which may be outside the standard atmosphere given in EN ISO 139, but at a temperature of (23 5) C, in which case the test should begin within 5 min of remo

27、val from the condi-tioning atmosphere. 5.3 Stability Check the requirements of 4.1 using a test sample of 1 000 mm minimum length and cut one warp and one weft thread. 5.4 Determination of tensile strength Carry out the determination of the tensile strength by using a tensile testing machine and fix

28、ing devices in ac-cordance with 5.1 of EN ISO 2307:2005. The minimum free length between attachment points shall be 200 mm. Determine the loading speed, v, as a function of the free length of the test sample, using Equation (1): v = 0,5 l with an accuracy of 20 % (1) where v is the loading speed in

29、millimetres per minute; l is the free length in millimetres between points of attachment. 5.5 Determination of mass per unit length Carry out the test with a minimum free length between points of attachment of 1 300 mm. NOTE There is no requirement for any particular type of fixing device. Load the

30、test sample without shock at a rate not exceeding 1 mm/s by means of a (4 0,05) kg test mass. Retain the maximum load for (60 15) s and mark a reference length of (1 000 1) mm, with a distance be-tween the marks and the points of attachment of at least 100 mm. Release the load and cut the marked par

31、t from the test sample and determine its mass to the nearest 0,1 g. Report the mass per unit length in grams per metre, to at least two significant figures. There is no specific requirement for mass per unit length, but it can be marked on the drum or packaging of the tape (see Clause 6). EN 565:200

32、6 (E) 7 6 Marking 6.1 The drum or production-line packaging of tapes shall be marked with at least the following items, which shall be given at least in the official language(s) of the state of destination within the European Community: a) word “tape“ and the number of this European Standard, i.e. E

33、N 565; b) name of the manufacturer or its representative in the European Community; c) tensile strength which the manufacturer ensures at the time of manufacturing; d) if tape is supplied on a drum and consists of more than one piece, the number of pieces shall be stated on the drum; e) year of manu

34、facture. NOTE In addition, the mass per unit length can also be marked. 6.2 The tape shall be marked by means of threads to allow the minimum tensile strength to be read directly, as follows: a) one coloured thread per 5 kN tensile strength; b) colour of the thread(s) shall be uniform and in contras

35、t to the colour of the tape; c) marking shall be on one side of the tape only, in the middle of the tape; d) space between coloured threads shall be clearly visible by eye. 7 Information supplied by the manufacturer The tape shall be supplied with an explanatory leaflet, and written in at least the

36、official language(s) of the state of destination within the European Community containing at least the following items: a) name and address of the manufacturer or its representative in the European Community; b) number of this European Standard, i.e. EN 565; c) meaning of any marking on the product;

37、 d) mass per unit length of the tape as specified in 5.5; e) tensile strength which the manufacturer ensures at the time of manufacturing; f) use of the product; g) how to choose other components for use in the system; h) how to maintain/service the product, on the effects of chemical reagents and h

38、ow to disinfect the product without adverse effect; i) lifespan of the product or how to assess it and that after a serious fall the tape should be withdrawn from use as soon as possible; j) influence of wet and icy conditions; k) danger of sharp edges; l) influence of storage and aging due to use;

39、m) influence of knots on the strength. EN 565:2006 (E) 8 Annex A (informative) Standards on mountaineering equipment Table A.1 List of standards on mountaineering equipment No Document Title 1 EN 892 Mountaineering equipment Dynamic mountaineering ropes Safety require-ments and test methods 2 EN 122

40、75 Mountaineering equipment Connectors Safety requirements and test methods 3 EN 13089 Mountaineering equipment Ice-tools Safety requirements and test methods 4 EN 12277 Mountaineering equipment Harnesses Safety requirements and test methods 5 EN 12492 Mountaineering equipment Helmets for mountainee

41、rs Safety requirements and test methods 6 EN 564 Mountaineering equipment Accessory cord Safety requirements and test methods 7 EN 565 Mountaineering equipment Tape Safety requirements and test methods 8 EN 566 Mountaineering equipment Slings Safety requirements and test methods 9 EN 12276 Mountaine

42、ering equipment Frictional anchors Safety requirements and test methods 10 EN 12270 Mountaineering equipment Chocks Safety requirements and test methods 11 EN 567 Mountaineering equipment Rope clamps Safety requirements and test meth-ods 12 EN 958 Mountaineering equipment Energy absorbing systems fo

43、r use in klettersteig (via ferrata) climbing Safety requirements and test methods 13 EN 959 Mountaineering equipment Rock anchors Safety requirements and test meth-ods 14 EN 568 Mountaineering equipment Ice anchors Safety requirements and test methods 15 EN 569 Mountaineering equipment Pitons Safety

44、 requirements and test methods 16 EN 893 Mountaineering equipment Crampons Safety requirements and test methods 17 prEN 15151 Mountaineering equipment Descenders Safety requirements and test methods 18 EN 12278 Mountaineering equipment Pulleys Safety requirements and test methods EN 565:2006 (E) 9 A

45、nnex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Ess

46、ential Requirements of the New Approach Directive 89/686/EEC on the approximation of the laws of the Member States relating to per-sonal protective equipment. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national s

47、tandard in at least one Member State, compliance with the clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a presumption of confor-mity with the corresponding Essential Requirements of that Directive and associated EFTA regulations. Table ZA.1 Co

48、rrespondence between this European Standard and Directive 89/686/EEC Clause(s)/sub-clause(s) of this EN Essential Requirements (ERs) of Directive 89/686/EEC Qualifying remarks/ Notes 4.1 1.2.1 Absence of risks and other inherent nuisance factors 4.2 1.3.2 Lightness and design strength 6, 7 1.4 Information supplied by the manufacturer WARNING: Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard.