DIN EN 15459-1-2017 Energy performance of buildings - Economic evaluation procedure for energy systems in buildings - Part 1 Calculation procedures Module M1-14 German version EN 1.pdf

《DIN EN 15459-1-2017 Energy performance of buildings - Economic evaluation procedure for energy systems in buildings - Part 1 Calculation procedures Module M1-14 German version EN 1.pdf》由会员分享，可在线阅读，更多相关《DIN EN 15459-1-2017 Energy performance of buildings - Economic evaluation procedure for energy systems in buildings - Part 1 Calculation procedures Module M1-14 German version EN 1.pdf（55页珍藏版）》请在麦多课文档分享上搜索。

1、September 2017 English price group 21No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.140.10!%mtW“2748152www.din.

2、deDIN EN 15459-1Energy performance of buildings Economic evaluation procedure for energy systems in buildings Part 1: Calculation procedures, Module M114;English version EN 154591:2017,English translation of DIN EN 15459-1:2017-09Energetische Bewertung von Gebuden Wirtschaftlichkeitsberechnungen fr

3、Energieanlagen in Gebuden Teil 1: Berechnungsverfahren, Modul M114;Englische Fassung EN 154591:2017,Englische bersetzung von DIN EN 15459-1:2017-09Performance nergtique des btiments Procdure dvaluation conomique des systmes nergtiques des btiments Partie 1: Mthode de calcul, Module M114;Version angl

4、aise EN 154591:2017,Traduction anglaise de DIN EN 15459-1:2017-09SupersedesDIN EN 15459:200806www.beuth.deDocument comprises 55 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.09.17 DIN EN 15459-1:2017-09 2 A comma is used as t

5、he decimal marker. National foreword This document (EN 15459-1:2017) has been prepared by Technical Committee CEN/TC 228 “Heating systems and water based cooling systems in buildings” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Heiz- u

6、nd Raumlufttechnik sowie deren Sicherheit (DIN Standards Committee Heating and Ventilation Technology and their Safety), Working Committee NA 041-01-58 AA “Heating systems and water based cooling systems in buildings, Mirror Committee to CEN/TC 228”. This standard has been prepared under the EPBD ma

7、ndate M/480. DIN EN 15459-1 is a European Standard and CEN/TR 15459-2 is the accompanying Technical Report to this standard containing further informative content for assessing the energy performance of a building. In Germany, the Directive on the energy performance of buildings (2010/31/EU) of the

8、European Parliament and the European Council is primarily implemented by national energy conservation law. National energy conservation law refers to dated national and European standards and national prestandards that have been specified to be implemented in Germany. In Germany, the application of

9、this standard in relation with national energy conservation law is defined by provisions in this law. Provisions of German energy conservation law cannot be systematically fully and identically implemented with the set of standards under the EPBD mandate M/480 and the therein referenced Internationa

10、l and European Standards. When applying the standards of the mandate, accordance with German energy conservation law cannot be achieved, whether in terms of the procedure, the result, or assessment of the result. Currently, the set of standards of the EPBD mandate M/480 is not applicable for the pur

11、poses of German energy conservation law, even if references to national regulations in the respective national annexes are considered. Amendments This standard differs from DIN EN 15459:2008-06 as follows: a) payback period and costs due to the end of life of the building have been included; b) the

12、standard has been updated based on the evolution of the annual costs over a specific time period; c) the informative content has been transferred to the accompanying Technical Report CEN/TR 15459-2. Previous editions DIN EN 15459: 2008-06 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15459-1

13、May 2017 ICS 91.140.10 Supersedes EN 15459:2007English Version Energy performance of buildings - Economic evaluation procedure for energy systems in buildings - Part 1: Calculation procedures, Module M1-14 Performance nergtique des btiments - Procdure dvaluation conomique des systmes nergtiques des

14、btiments - Partie 1: Mthode de calcul, Module M1-14 This European Standard was approved by CEN on 27 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any

15、 alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other languag

16、e made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark,

17、Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMIT

18、TEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15459-1:2017 EEnergetische

19、Bewertung von Gebuden -Wirtschaftlichkeitsberechnungen fr Energieanlagenin Gebuden - Teil 1: Berechnungsverfahren, Modul M114EN 15459-1:2017 (E) 2 Contents Page European foreword . 4 Introduction 5 1 Scope 7 2 Normative references . 11 3 Terms and definitions 11 4 Symbols and abbreviations 15 4.1 Sy

20、mbols 15 4.2 Subscripts 16 5 Description of the method 17 5.1 General . 17 5.2 Output of the method 17 5.3 Parameters used for economic calculation 18 5.3.1 Discount rate and present value factor 18 5.3.2 Initial costs . 19 5.3.3 Annual costs . 19 5.3.4 Final costs . 19 6 Presentation of the economi

21、c calculation . 21 6.1 Output data . 21 6.2 Calculation time steps 21 6.3 Input data 22 6.3.1 Scenarios and boundaries . 22 6.3.2 General input data . 22 6.3.3 Specific input data for products and services 22 6.4 Step by step calculation . 24 6.4.1 General . 24 6.4.2 STEP 1 - Financial data . 24 6.4

22、.3 STEP 2 - Project data . 25 6.4.4 STEP 3 - Costs regarding components and systems (investment, replacement) 26 6.4.5 STEP 4 - Energy cost (as part of the annual costs) 30 6.4.6 STEP 5 - Global cost calculation 31 6.4.7 Calculation of Payback period . 32 7 Quality control 33 7.1 Calculation report

23、33 7.2 Comparison of different options . 34 8 Compliance check. 35 Annex A (normative) Template for input data and choices . 36 A.1 Financial data 36 A.2 Calculation period 36 A.3 Valuation of the costs for products and services 36 A.4 Valuation of costs for energy . 37 Annex B (informative) Default

24、 input data 38 B.1 Financial data 38 B.2 Calculation period 38 DIN EN 15459-1:2017-09 EN 15459-1:2017 (E) 3 B.3 Valuation of the costs for products and services. 39 B.4 Valuation of costs for energy 39 Annex C (informative) Selection for methods . 41 C.1 General . 41 C.2 Selection between methods A

25、and B 41 Annex D (informative) Data for components . 42 Annex E (informative) Description of systems 45 Bibliography . 52 DIN EN 15459-1:2017-09 EN 15459-1:2017 (E) 4 European foreword This document (EN 15459-1:2017) has been prepared by Technical Committee CEN/TC 228 “Heating systems and water base

26、d cooling systems in buildings”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2017, and conflicting national standards shall be withdrawn at th

27、e latest by November 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 15459:2007. This document has b

28、een prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. EN 15459, Energy performance of buildings Economic evaluation procedure for energy systems in buildings, is composed with the following parts: Part 1: Calculation procedures, Module M1-14; P

29、art 2: Explanation and justification of EN 15459-1, Module M1-14 CEN/TR. The revision kept the main principles of the calculation unchanged, but the structure of the document was changed. Informative content was removed to the accompanying Technical Report CEN/TR 15459-2. The values may be altered i

30、n a national annex. The main changes compared to EN 15459:2007 are: a) addition of the payback period and the addition of costs due to the end of life of the building; b) update based on the evolution of the annual costs over a specific time period; c) informative content is removed to the accompany

31、ing Technical Report CEN/TR 15459-2. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugosl

32、av Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 15459-1:2017-09 EN 15459-1:2017 (E)

33、 5 Introduction This European Standard is part of a series of standards aiming at international harmonization of the methodology for the assessment of the energy performance of buildings, called “set of EPB standards”. All EPB standards follow specific rules to ensure overall consistency, unambiguit

34、y and transparency. All EPB standards provide a certain flexibility with regard to the methods, the required input data and references to other EPB standards, by the introduction of a normative template in Annex A and Annex B with informative default choices. For the correct use of this standard a n

35、ormative template is given in Annex A to specify these choices. Informative default choices are provided in Annex B. CEN/TC 228 deals with heating systems in buildings. Subjects covered by CEN/TC 228 are: energy performance calculation for heating systems; inspection of heating systems; design of he

36、ating systems; installation and commissioning of heating systems. This standard gives a method for the economic calculation of the building envelope and others building related systems covered by the EPB standards. This method can be used, fully or partly, for the following applications: consider ec

37、onomic feasibility of energy saving options in buildings; compare different solutions of energy saving options in buildings (plant types, fuels); evaluate economic performance of an overall design of the building (for example, trade-off between energy demand and energy efficiency of heating systems)

38、; assess the effect of possible energy conservation measures on an existing heating system, by economic calculation of the cost of energy use with and without the energy conservation measure. For the correct use of this standard, Annex A will be used to specify the choices with the required input da

39、ta. Information and guidance on use of the monthly and annual methods are provided in Annex B. In case the standard is used in the context of national or regional legal requirements, mandatory choices may be given at national or regional level for such specific applications, in particular for the ap

40、plication within the context of EU Directives transposed into national legal requirements. These choices can be made available as National Annex or as separate (e.g. legal) document. It is expected, if the default values and choices in Annex A are not followed due to national regulations, policy or

41、traditions, that: either the national standardization body will consider the possibility to add or include a National Annex in agreement with the template of Annex A; or the national or regional authorities will, in the building regulations, reference the standard and prepare data sheets containing

42、the national or regional choices and values, in agreement with the template of Annex A. The user should refer to other European Standards or to national documents for input data and detailed calculation procedures not provided by this standard, especially dynamic economical calculation are DIN EN 15

43、459-1:2017-09 EN 15459-1:2017 (E) 6 not detailed in this standard. The methods to calculate the building energy demand are provided by EN 15603. NOTE Sensitivity of results increase depending on the number of parameters that are under consideration (lifetime, financial rates, ratio of price rise rat

44、es,) and as numerous are the parameters that change when comparing different solutions, as difficult will be the conclusions that rise when economic results are compared between solutions. Economical results are closely related to the project under consideration, and no general conclusion should be

45、drawn from such results. DIN EN 15459-1:2017-09 EN 15459-1:2017 (E) 7 1 Scope This European Standard provides a calculation method for the economic issues of heating systems and other systems that are involved in the energy demand and consumption of the building. It applies to all types of new and e

46、xisting buildings. The fundamental principles and terminology are explained in the standard. The main items of the standard will be: the definitions and the structure of the types of costs which should be taken into account for the calculation of the economic efficiency of saving options in building

47、s; data needed for definition of costs related to systems under consideration; the calculation method(s); expression of the result of the economic study. This European Standard is part of the method for calculation of economic performance of energy saving options in buildings (e.g. insulation, bette

48、r performing generators and distribution systems, efficient lighting, renewable sources, combined heat and power). The scope of this specific part is to standardize: the required inputs; the required outputs; the calculation formulas; the type of energy systems concerned with the energy performance

49、of the building. NOTE 1 This is the revision of EN 15459:2007. The revision has been made consistent with the EU regulation on cost-optimal. This revision includes the definition of payback for investment, and inclusion of the costs due to the deconstruction of the building. The method presenting annualized costs has been suppressed. NOTE 2 This standard does not consider financial advantages for higher productiv