CSA M422-2014 Fire-performance and antistatic requirements for conveyor belting (Third Edition).pdf

《CSA M422-2014 Fire-performance and antistatic requirements for conveyor belting (Third Edition).pdf》由会员分享，可在线阅读，更多相关《CSA M422-2014 Fire-performance and antistatic requirements for conveyor belting (Third Edition).pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、M422-14Fire-performance and antistaticrequirements for conveyor beltingLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approvedby the Standards Council of Canada. This process brings together vol

2、unteers representing varied viewpoints and interests to achieve consensusand develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it doesnot independently test, evaluate, or verify the content of standards.Disclaimer and exc

3、lusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation,implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infri

4、ngementof any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the informationpublished in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicablestatute, rule, or r

5、egulation.IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS,OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED,INCLUDING BUT NOT LIMITED TO SPECIAL OR CONS

6、EQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGEDDATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS,WHETHER BASED IN CONTRACT,TORT (INCLUDING NEGLIGENCE), OR ANY OTHERTHEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA

7、GROUPHAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of anyperson or entity or to perform any duty owed by any person or enti

8、ty to another person or entity. The information in this document is directedto those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoeverarising in any way from any and all use of or reliance on the information contained in t

9、his document.CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does itundertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs bet

10、ween CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorizedlicensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and allinventions and trade secr

11、ets that may be contained in this document, whether or not such inventions and trade secrets are protected bypatents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document mayviolate laws that protect CSA Groups and/or others int

12、ellectual property and may give rise to a right in CSA Group and/or others to seek legalredress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectualproperty rights in this document.Patent rightsAttention is drawn to the

13、 possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not beheld responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity ofany such patent rights is entirely thei

14、r own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to doonly the following:If this document is in electronic form: load this document onto a computer for the sole purp

15、ose of reviewing it; search and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have suchcopies, and only if this Legal Notice appears on each such copy.I

16、n addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this document.If you do not agree with any of the terms and conditions

17、contained in this Legal Notice, you may not load or use this document or make anycopies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this documentconstitutes your acceptance of the terms and conditions of this Legal Notice.Standards Upd

18、ate ServiceM422-14November 2014Title: Fire-performance and antistatic requirements for conveyor beltingTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is

19、2422898.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personalinformation.ISBN 978-1-77139-708-7 2014 CSA GroupAll rights reserved. No part of this publication may be repr

20、oduced in any form whatsoeverwithout the prior permission of the publisher.Published in November 2014 by CSA GroupA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6To purchase standards and related publications, visit our Online Store at sh

21、op.csa.caor call toll-free 1-800-463-6727 or 416-747-4044.TMA trade-mar k of the Canadian S tandards Association, operating as “CSA Group”Fire-performance and antistaticrequirements for conveyor beltingM422-14M422-14Fire-performance and antistatic requirementsfor conveyor beltingNovember 2014 2014 C

22、SA Group 1ContentsTechnical Committee on Fire Resistant Conveyor Belting 3Preface 51 Scope 62 Definitions 73 Test requirements 73.1 Classification of belting 73.2 Types A1 and A2 belting 73.2.1 Flame test Types A1 and A2 belting 73.2.2 Drum friction test 73.2.3 Flame propagation test Types A1 and A2

23、 belting 83.2.4 Electrical surface resistance test Types A1 and A2 belting 83.3 Types B1-A, B1-B, and B2 belting 83.3.1 Flame test Types B1-A, B1-B, and B2 belting 83.3.2 Drum friction test 83.3.3 Flame propagation test Types B1-A, B1-B, and B2 belting 93.3.4 Electrical surface resistance test Types

24、 B1-A, B1-B, and B2 belting 93.4 Type C belting 93.4.1 Flame test 93.4.2 Drum friction test 93.4.3 Electrical surface resistance test 94 Test methods 94.1 Flame test for Types A1 and A2 belting 94.1.1 Samples 94.1.2 Equipment 104.1.3 Procedure 104.2 Flame test for Types B1-A, B1-B, B2, and C belting

25、 114.2.1 Samples 114.2.2 Equipment 114.2.3 Procedure 124.3 Drum friction test for all types belting 124.3.1 Samples 124.3.2 Equipment 124.3.3 Procedure 134.4 Flame propagation test for Types A1, A2, B1-A, B1-B, and B2 belting 144.4.1 Samples 144.4.2 Equipment 144.4.3 Procedure 144.5 Electrical resis

26、tance test for all belting types 154.5.1 Samples 154.5.2 Equipment 154.5.3 Preparation of sample 16M422-14Fire-performance and antistatic requirementsfor conveyor beltingNovember 2014 2014 CSA Group 24.5.4 Procedure 165 Branding 16Annex A (informative) Recommended installation measures 30Annex B (in

27、formative) Guideline for conformity assessment to CSA M422 31M422-14Fire-performance and antistatic requirementsfor conveyor beltingNovember 2014 2014 CSA Group 3Technical Committee on Fire ResistantConveyor BeltingE. Zalok Carleton University,Ottawa, OntarioCategory: General InterestChairJ. Appleya

28、rd Potash Corporation of Saskatchewan,Saskatoon, SaskatchewanAssociateD. Ashby Veyance Technologies Canada Inc.,Bowmanville, OntarioAssociateN. Crocker Saskatoon, Saskatchewan AssociateJ.L. Freitas Quinsam Coal Corp,Campbell River, British ColumbiaCategory: User InterestG.B. Ganguly International Co

29、nveyors Ltd,Aurangabad, IndiaAssociateM. Harrington Teck Coal Ltd - Fording River Operations,Elkford, British ColumbiaAssociateJ.A. Holcombe Veyance Technologies, Inc,Marysville, Ohio, USACategory: Producer InterestA. (Aamer) Hussain International Conveyors Ltd,Lynbrook, New York, USAAssociateA. (An

30、ver) Hussain International Conveyors Ltd,Aurangabad, IndiaCategory: Producer InterestI. Jordan Continental Mine ii) The following clauses have been restructured:1) Clause 4.1 Flame test for belt types A1 and A2;2) Clause 4.2 Flame test for belt types B1-A, B1-B, B2, and C;3) Clause 4.3 Drum friction

31、 test for all belt types;4) Clause 4.4 Flame propagation test for belt types A1, A2, B1-A, B1-B, and C; and5) Clause 4.5 Electrical resistance test for all belt types;iii) a new Figure 1,“Typical arrangement for flame test for belt type A1 and A2”, has been added;andiv) Figures 1 to 9 in the previou

32、s edition have been renumbered to Figures 2 to 10 in this edition.b) Annex B.“Guideline for conformity assessment to CSA M422”, has been added.CSA Group gratefully acknowledges that the development of this Standard was made possible, in part,by the financial support of the Canadian Association of Ad

33、ministrators of Labour Legislation forOccupational Safety and Health.This Standard was prepared by the Technical Committee on Fire Resistant Conveyor Belting under thejurisdiction of the Standards Steering Committee on Occupational Health and Safety, and has beenformally approved by the Technical Co

34、mmittee.Notes:1) Use of the singular does not exclude the plural (and vice versa) when the sense allows.2) Although the intended primary application of this Standard is stated in its Scope, it is important to note that itremains the responsibility of the users of the Standard to judge its suitabilit

35、y for their particular purpose.3) This Standard was developed by consensus, which is defined by CSA Policy governing standardization Codeof good practice for standardization as “substantial agreement. Consensus implies much more than a simplemajority, but not necessarily unanimity”. It is consistent

36、 with this definition that a member may be included inthe Technical Committee list and yet not be in full agreement with all clauses of this Standard.4) To submit a request for interpretation of this Standard, please send the following information toinquiriescsagroup.org and include “Request for int

37、erpretation” in the subject line:a) define the problem, making reference to the specific clause, and, where appropriate, include anillustrative sketch;b) provide an explanation of circumstances surrounding the actual field condition; andc) where possible, phrase the request in such a way that a spec

38、ific “yes” or “no” answer will address theissue.Committee interpretations are processed in accordance with the CSA Directives and guidelines governingstandardization and are available on the Current Standards Activities page at standardsactivities.csa.ca.5) This Standard is subject to review five ye

39、ars from the date of publication. Suggestions for its improvement willbe referred to the appropriate committee. To submit a proposal for change, please send the followinginformation to inquiriescsagroup.org and include “Proposal for change” in the subject line:a) Standard designation (number);b) rel

40、evant clause, table, and/or figure number;c) wording of the proposed change; andd) rationale for the change.M422-14Fire-performance and antistatic requirementsfor conveyor beltingNovember 2014 2014 CSA Group 6M422-14Fire-performance and antistaticrequirements for conveyor belting1 Scope1.1This Stand

41、ard specifies fire-performance and antistatic requirements for new (unused) conveyor beltingfor use in any part of a mining or excavation operation that is below the surface.1.2This Standard covers fire-performance and antistatic conveyor belting of the following types:a) Types A1 and A2 intended fo

42、r use in explosive atmospheres; andb) Types B1-A, B1-B, B2, and C intended for use in non explosive atmospheres.1.3This Standard does not cover products of combustion or products of thermal degradation fromconveyor belting subjected to fire or heating.Note: While the intent of this Standard is to es

43、tablish a reasonable level of fire-performance for conveyor belting, itis recognized that any conveyor belt material could burn under conditions different from those described in thisStandard. Therefore, to ensure a higher level of fire safety, consideration should be given to installation measuress

44、uch as those listed in Annex A.1.4A guideline for conformity assessment to this Standard is provided in Annex B.1.5In CSA standards,“shall” is used to express a requirement, i.e., a provision that the user is obliged tosatisfy in order to comply with the standard; “should” is used to express a recom

45、mendation or thatwhich is advised but not required; and “may” is used to express an option or that which is permissiblewithin the limits of the standard.Notes accompanying clauses do not include requirements or alternative requirements; the purpose of anote accompanying a clause is to separate from

46、the text explanatory or informative material.Notes to tables and figures are considered part of the table or figure and may be written asrequirements.Annexes are designated normative (mandatory) or informative (non-mandatory) to define theirapplication.M422-14Fire-performance and antistatic requirem

47、entsfor conveyor beltingNovember 2014 2014 CSA Group 72 DefinitionsThe following definitions shall apply in this Standard:Antistatic (as applied to conveyor belting) having a sufficient conductance to pass the electricalsurface resistance test specified in this Standard.Explosive atmosphere an atmos

48、phere where ignitable and explosive concentrations of gases,vapours, or dusts might occur.Fire-performance (as applied to conveyor belting) the characteristics of the belting that meet thecriteria of the appropriate flame, drum friction, and flame propagation tests where specified in thisStandard.Pr

49、opane Type HD-5 or equivalent with a propane content of no less than 90%.3 Test requirements3.1 Classification of beltingIn order to be classified, belting shall meet all the criteria in all the tests specified for a particular type.Note: It is recognized that, due to the large number of combinations of various carcasses and covers, it isimpractical to conduct individual tests on every single member of a series of conveyor belting. In most cases,certain members of a series would be selected for testing. For example, for a series o