BS ISO 5971-2017 Size designation of clothes Tights《服装规格设定 紧身衣》.pdf

《BS ISO 5971-2017 Size designation of clothes Tights《服装规格设定 紧身衣》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 5971-2017 Size designation of clothes Tights《服装规格设定 紧身衣》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、Size designation of clothes TightsBS ISO 5971:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of ISO 5971:2017.The UK participation in its preparation was entrusted to Technical Committee TCI/66/-/3,

2、 Clothing sizing systems.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 201

3、7 Published by BSI Standards Limited 2017ISBN 978 0 580 90392 2ICS 61.020Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2017.Amendments/corrigenda issu

4、ed since publicationDate Text affectedBRITISH STANDARDBS ISO 5971:2017 ISO 2017Size designation of clothes TightsDsignation des tailles de vtements CollantsINTERNATIONAL STANDARDISO5971Second edition2017-06-01Reference numberISO 5971:2017(E)BS ISO 5971:2017ISO 5971:2017(E)ii ISO 2017 All rights rese

5、rvedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intr

6、anet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.

7、iso.orgBS ISO 5971:2017ISO 5971:2017(E)Foreword iv1 Scope . 12 Normative references 13 Terms and definitions . 14 Size designation . 14.1 Control dimensions of tights . 14.2 Survey data . 24.3 Marking, labelling and packaging . 2Annex A (informative) Rationale 3Annex B (informative) Examples of size

8、 grids or tables . 5Bibliography 9 ISO 2017 All rights reserved iiiContents PageBS ISO 5971:2017ISO 5971:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards i

9、s normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take par

10、t in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particul

11、ar the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this

12、document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.is

13、o.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as informa

14、tion about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html The committee responsible for this document is ISO/TC 133, Clothing sizing systems Size designation, size measurement methods and d

15、igital fittings.This second edition cancels and replaces the first edition (ISO 5971:1981), which has been technically revised in order to align with ISO 8559-1:2017 and ISO 8559-2:2017 and include the following main changes: informative Annex A added on rationale related to survey data on body dime

16、nsions; informative Annex B added including updated examples of tight size designation.iv ISO 2017 All rights reservedBS ISO 5971:2017Size designation of clothes Tights1 ScopeThis document establishes a system for designating the sizes of tights.The system is based on three criteria: identification

17、of dimensions; description of the methods of determining size designations from survey data; and indication of size designations for garment labelling.Examples of size designations are given in Annex B.NOTE Tights are sometimes called by other names, e.g. “pantyhose”. 2 Normative referencesThe follo

18、wing documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 855

19、9-1, Size designation of clothes Part 1: Anthropometric definitions for body measurementISO 8559-2, Size designation of clothes Part 2: Primary and secondary dimension indicators3 Terms and definitionsNo terms and definitions are listed in this document. ISO and IEC maintain terminological databases

20、 for use in standardization at the following addresses: ISO Online browsing platform: available at http:/www.iso.org/obp IEC Electropedia: available at http:/www.electropedia.org/ 4 Size designation4.1 Control dimensions of tightsThe control dimensions of tights are usually as follows:1) height as t

21、he primary dimension and hip girth and/or body mass as the secondary dimension;2) hip girth as the primary dimension and height as the secondary dimension.NOTE There is a close correlation between hip girth and body mass (see Annex A).Body measurements are determined in accordance with ISO 8559-1 an

22、d control dimensions in accordance with ISO 8559-2.INTERNATIONAL STANDARD ISO 5971:2017(E) ISO 2017 All rights reserved 1BS ISO 5971:2017ISO 5971:2017(E)4.2 Survey dataThe size designation is obtained from a grid (see Annex B) having height and hip girth or height and body mass for co-ordinates.Each

23、 cell represents the fraction of population matching either both dimensions or height and body mass. A white empty cell means that it does not correspond to anybody or only to a very low percentage of people (for distribution of the population, see Annex A).By plotting the intended wearers height ag

24、ainst hip girth or body mass as presented on the grid, the appropriate size designation can be determined. The size designation may be indicated by colour, by number or by any other suitable means.Instead of using a detailed grid, a simpler chart may be provided to the consumer with a range of heigh

25、t/hip girth or height/body mass (see Annex B).The cartography and the number of sizes will differ from one supplier to another, as it will depend on the deformation behaviour and the extensibility of the product as well as on the intended market of wearers.4.3 Marking, labelling and packagingThe siz

26、e designation shall be indicated clearly, conspicuously and in a plainly identifiable form on the packaging or label.The labelling examples given in the different figures of Annex B illustrate methods of determining and indicating the size which is appropriate to the control dimensions of the intend

27、ed wearer.2 ISO 2017 All rights reservedBS ISO 5971:2017ISO 5971:2017(E)Annex A (informative) RationaleTo build a grid, the first co-ordinate is usually the hip girth or the height (there is a close correlation between the height and the inside leg length).If the first dimension is the hip girth, th

28、e second one is the height.If the first dimension is the height, the second co-ordinate is either the hip girth or the body mass. A close correlation has been found between both. As the consumer is much more familiar with the body mass than the hip girth, the grids height/body mass are more commonly

29、 used on the market.EXAMPLE 1 Data from national or specific sizing surveys give the distribution of the population in the different cells of the grid (dimensions in centimetres):Height Hip girth76 80 84 88 92 96 100 104 108 112 116 120 124 128 132 136 140 1441401431461491521551581611641671701731761

30、79182185NOTE Data from the French national survey 20061.Colour scale: No colour: nobody matches the dimensions Lightest blue 1: between 0,01 % and 0,1 % of the measured population Blue 2: between 0,1 % and 0,5 % of the measured population Blue 3: between 0,5 % and 1 % of the measured population Blue

31、 4: between 1 % and 2 % of the measured population Darkest blue 5: between 2 % and 4 % of the measured population ISO 2017 All rights reserved 3BS ISO 5971:2017ISO 5971:2017(E)EXAMPLE 2 Using height (in centimetres) and body mass (in kilograms) with the same colour scale above:Height Body mass35 37

32、40 44 48 52 57 62 66 70 74 80 86 92 98 104 110 116137140143146149152155158161164167170173176179182185188Each company can then define its range of sizes and the limits of the co-ordinates according to the morphology of the intended wearers. The number of different sizes within the grid often depends

33、on the extensibility of the product; when a more stretchy material is used the number of sizes required can be reduced.4 ISO 2017 All rights reservedBS ISO 5971:2017ISO 5971:2017(E)Annex B (informative) Examples of size grids or tablesB.1 Examples with gridsB.1.1 GeneralDifferent sizes often follow

34、diagonal lines within the grid because of the deformation behaviour of the products.In the first example, height is used as the primary dimension and body mass as the secondary dimension.B.1.2 Example: Height (m)/body mass (kg)Height Body mass42 45 48 51 54 57 60 63 66 69 72 751,421,451,481,511,54 1

35、1,571,60 21,631,66 31,691,72 41,751,781,81 ISO 2017 All rights reserved 5BS ISO 5971:2017ISO 5971:2017(E)B.1.3 Example: Hip girth(cm)/height (cm)In this second example, hip girth is used as the primary dimension and height as the secondary dimension.Height Hip girth80 82 84 86 88 90 92 94 96 98 100

36、102 104 106142144146148150 S152154156 M158160162 L164166 XL168170172For more stretchable products, fewer sizes may be found with bigger intervals between the values.B.1.4 Example: Height (cm)/body mass (kg)In this third example, height is used as the primary dimension and body mass as the secondary

37、dimension.Height Body mass47 48/53 53/58 58/63 63/68 68/73 73/78155155/160160/165 1/2165/170170/175 3/4175/180180/185B.2 TablesB.2.1 GeneralSimpler charts may also be found on the market for some products, using only ranges of measurement and letters to represent sizes.B.2.2 Examples with height and

38、 body massHeight is used as the primary dimension and body mass as the secondary dimension.6 ISO 2017 All rights reservedBS ISO 5971:2017ISO 5971:2017(E)B.2.2.1 Example: Letter size Height/body massLetter sizeHeightcmBody masskgS (small) 152-163 44-66M (medium) 163-173 50-74L (large) 173-183 56-83B.

39、2.2.2 Example: Height size Height/body massIn this example, the mean value of the height is used to express the size:SizeHeightcmBody masskg155 150/160 40/45165 160/170 45/65175 170/180 45/75185 180/190 55/85B.2.3 Examples with height and hip girthB.2.3.1 Letter size Height/hip girthIn this example

40、taken from the European market, height is used as the primary dimension and hip girth as the secondary dimension.For medium and large letter sizes, two possibilities are considered: to keep the height range of the smaller size and only increase the hip range or to increase the height range with the

41、same hip range as the smaller size.Letter sizeHeightcmHip girthcmSmall 150-164 86-100Medium 150-164 101-107165-176 86-100Large 165-176 101-107177-188 86-100Extra Large 155-178 108-122In both examples B.2.3.2 and B.2.3.3 taken from the Asian market, hip girth is used as the primary dimension and heig

42、ht as the secondary dimension.B.2.3.2 Letter size Hip girth/heightLetter sizeHip girthcmHeightcmS (small) 80-90 150-160M-L (medium-large) 85-100 155-170XL (extra large) 85-105 165-175XXL (extra extra large) 100-110 170-180 ISO 2017 All rights reserved 7BS ISO 5971:2017ISO 5971:2017(E)B.2.3.3 Other l

43、etter size Hip girth/heightLetter size S (small) M (medium) L (large) LL (large large) Hip girth in cm 80-88 85-93 90-98 95-103Height in cm 145-155 150-160 155-165 160-1708 ISO 2017 All rights reservedBS ISO 5971:2017ISO 5971:2017(E)Bibliography1 Coffret anthropomtrique 2006 Mthodes et rsultats Camp

44、agne Nationale de Mensuration 2006, Institut Franais Textile-Habillement, France ISO 2017 All rights reserved 9BS ISO 5971:2017This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publicatio

45、ns, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their

46、combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve the

47、ir goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI

48、publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services tea

49、m.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any o