BS ISO 12647-7-2016 Graphic technology Process control for the production of halftone colour separations proof and production prints Proofing processes working directly from digita.pdf

《BS ISO 12647-7-2016 Graphic technology Process control for the production of halftone colour separations proof and production prints Proofing processes working directly from digita.pdf》由会员分享，可在线阅读，更多相关《BS ISO 12647-7-2016 Graphic technology Process control for the production of halftone colour separations proof and production prints Proofing processes working directly from digita.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、BS ISO 12647-7:2016Graphic technology Process control for the production of halftone colour separations, proof and production printsPart 7: Proofing processes working directly from digital dataBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS ISO 12647-7:2016 BRITIS

2、H STANDARDNational forewordThis British Standard is the UK implementation of ISO 12647-7:2016. It supersedes BS ISO 12647-7:2013 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PAI/43, Graphic technology.A list of organizations represented on this com

3、mittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 87416 1 ICS 37.1

4、00.01 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS ISO 12647-7:2

5、016 ISO 2016Graphic technology Process control for the production of halftone colour separations, proof and production prints Part 7: Proofing processes working directly from digital dataTechnologie graphique Contrle des processus de confection de slections couleurs trames, dpreuves et de tirages Pa

6、rtie 7: Processus dpreuve travaillant directement partir de donnes numriquesINTERNATIONAL STANDARDISO12647-7Third edition2016-11-15Reference numberISO 12647-7:2016(E)BS ISO 12647-7:2016ISO 12647-7:2016(E)ii ISO 2016 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2016, Published in SwitzerlandAl

7、l rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested f

8、rom either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 12647-7:2016ISO 12647-7:2016(E)Foreword ivIntroduction

9、v1 Scope . 12 Normative references 13 Terms and definitions . 14 Requirements 34.1 Colour difference measurements 34.2 Data files, simulation of screens. 34.2.1 Data delivery . 34.2.2 Screen frequency . 34.2.3 Screen angle . 34.2.4 Dot shape 34.2.5 Halftone proofs screening 34.3 Proof print . 34.3.1

10、 General 34.3.2 Proofing substrate colour and gloss 44.3.3 Colouration of printed parts 44.3.4 Gamut 54.3.5 Permanence of proofing substrate and printed parts . 54.3.6 Repeatability of proof printing 64.3.7 Colourant rub resistance 64.3.8 Ink set gloss 74.3.9 Tone value reproduction limits . 74.3.10

11、 Reproduction of vignettes 74.3.11 Image register and resolving power . 74.3.12 Margin information . 75 Test methods . 85.1 Viewing conditions 85.2 Control strip 85.3 Additional test objects 95.3.1 Resolution 95.3.2 Primary and secondary process colours . 95.3.3 Resolving power . 95.3.4 Uniformity .

12、 95.4 Colour measurement . 95.5 Measurement of gloss 105.6 Visual appraisal of proof-press-print matches .10Annex A (normative) Technical requirements for proofing conformity 11Annex B (normative) Rub resistance of the proof colourant .15Annex C (normative) Outer gamut patches.18Annex D (informative

13、) Organizational certification routines for visual appraisal of proof-print press-print matches 21Bibliography .23 ISO 2016 All rights reserved iiiContents PageBS ISO 12647-7:2016ISO 12647-7:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national

14、 standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Internationa

15、l organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended fo

16、r its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.or

17、g/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be

18、in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions r

19、elated to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.The committee responsible for this document is ISO/TC 130, Graphic technology.Th

20、is third edition cancels and replaces the second edition (ISO 12647-7:2013), which has been technically revised with the following changes: a number of anomalies identified by industry experts have been addressed; substrate selection and measurement specification has been modified to reflect industr

21、y practice; approximately equivalent CIEDE2000 colour difference values have been added; basic support for spot inks has been added; wording has been updated to reflect current terminology and industry thinking.A list of all parts in the ISO 12647 series can be found on the ISO website.iv ISO 2016 A

22、ll rights reservedBS ISO 12647-7:2016ISO 12647-7:2016(E)IntroductionISO 12647-1 serves to provide definitions, the general principles, the general order, the material to be covered in ISO 12647-2 to ISO 12647-8, the definition of the data, the measurement conditions, and the reporting style.This doc

23、ument relates to the subject of digital proofing and establishes proofing requirements for the most demanding part of the printing and publishing market.This document specifies aim values (or sets of aim values) and tolerances for the primary parameters specified in ISO 12647-1 for digital proof pri

24、nting. Primary parameters that define a printing condition include screening parameters (where applicable), the colours of the solids, the colour of the print substrate, colours of intermediate tint values and the tone curve. This document also specifies test methods for those properties of digital

25、proof prints and their substrates that are considered relevant for stable and reliable proofing conditions, and thus for a certification procedure.The graphic technology industry makes extensive use of proofing to predict the rendering of digital data files by a wide variety of high-definition, high

26、-quality off-press printing processes and applications. Each prediction is based on a characterization data set that defines a particular printing condition.Typically, the specified printing condition is defined through an International Color Consortium (ICC) profile or the associated characterizati

27、on data set, both of which relate source data and colorimetric values of the printed colour. Such data may be derived from printing conditions conforming to the pertinent process standard of the ISO 12647 series by industry trade groups or individuals.The purpose of a proof print is to simulate the

28、visual characteristics of the finished production print product as closely as possible. In order to visually match a particular printing condition, proofing processes require a set of parameters to be specified that are not necessarily identical to those put forward in ISO 12647-1 or another part of

29、 ISO 12647. This is caused by differences in colourant spectra or phenomena such as gloss, light scatter (within the print substrate or the colourant), and transparency. In such cases, it is also found that spectrocolorimetry takes precedence over densitometry.Another problem area is the matching of

30、 a double-sided production print on a lightweight printing substrate, such as often used in heat-set web and publication gravure printing, to a digital proof on a nearly opaque substrate. If the proof was produced using a colour management profile based on measurements with white backing, there will

31、 be an unavoidable visual and measurable difference between the proof on the one hand and the production print placed on black on the other hand. A black backing is required for double-sided production printing on non-opaque prints, as specified in the pertinent parts of ISO 12647. The possible occu

32、rrence of such differences needs to be well communicated, in advance, to all parties concerned.Historically, there has been no consistency in the way that either the characterization data or the criteria and limits for a satisfactory match have been provided. This has led to significant redundancy a

33、nd inconsistencies in the evaluation of proofing systems for different, but similar, applications, and a cost and time burden on the industry. This document therefore attempts to provide guidance in this area by providing specifications and associated testing procedures.Annex A summarizes the requir

34、ements for the digital proof prints listed in the main body of this document; these are weighted with respect to their relevance in three typical situations: requirements with which a proof print, made for a particular printing condition, must comply if it is to be referenced in a contract between t

35、he printer and the provider of the digital data (Certified Proof Creation); requirements with which a vendors proofing system, comprising hardware and software, must comply if it is to be considered capable of reliably producing digital contract proofs for a particular printing condition (Certified

36、Proofing System); requirements with which a proof print made for a particular printing condition must comply when tested in the field using only a control wedge (Certified Field Proof). ISO 2016 All rights reserved vBS ISO 12647-7:2016ISO 12647-7:2016(E)ISO 12647-8 defines requirements for validatio

37、n prints. Because data are exchanged electronically and visualizations of those data are produced at multiple sites, there is a market need for defined requirements for validation prints to promote a degree of consistency throughout the workflow. Validation prints are intended to be used at early st

38、ages of the print production workflow, particularly at the document design stage and have less stringent requirements, particularly on colour fidelity, to allow their production on less elaborate and less costly devices than are required for contract proofs.Validation prints are not intended to repl

39、ace “contract proofs” as specified in this document for predicting colour on production printing devices. It is expected that the modifications of the requirements for both contract proofs and validation prints, along with the requirements for contract proofs, will continue in the future as industry

40、 requirements and imaging technologies develop.vi ISO 2016 All rights reservedBS ISO 12647-7:2016INTERNATIONAL STANDARD ISO 12647-7:2016(E)Graphic technology Process control for the production of halftone colour separations, proof and production prints Part 7: Proofing processes working directly fro

41、m digital data1 ScopeThis document specifies requirements for systems that are used to produce hard-copy digital proof prints intended to simulate a printing condition defined by a set of characterization data. Recommendations are provided with regard to appropriate test methods associated with thes

42、e requirements.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced docum

43、ent (including any amendments) applies.ISO 187, Paper, board and pulps Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samplesISO 2813, Paints and varnishes Determination of gloss value at 20, 60 and 85ISO 3664, Graphic technology and

44、photography Viewing conditionsISO 8254-1, Paper and board Measurement of specular gloss Part 1: 75 gloss with a converging beam, TAPPI methodISO 12040, Graphic technology Prints and printing inks Assessment of light fastness using filtered xenon arc lightISO 12639, Graphic technology Prepress digita

45、l data exchange Tag image file format for image technology (TIFF/IT)ISO 12640-1, Graphic technology Prepress digital data exchange Part 1: CMYK standard colour image data (CMYK/SCID)ISO 12642-2, Graphic technology Input data for characterization of 4-colour process printing Part 2: Expanded data set

46、ISO 13655, Graphic technology Spectral measurement and colorimetric computation for graphic arts imagesISO 15397:2014, Graphic technology Communication of graphic paper properties3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 12647-1 and the followin

47、g apply. ISO 2016 All rights reserved 1BS ISO 12647-7:2016ISO 12647-7:2016(E)ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/ob

48、p3.1chromatic primariescyan, magenta and yellow process inks3.2CIELAB chromaticness differenceChdifference between two colours of approximately the same lightness projected onto a constant lightness plane in the CIELAB colour spaceNote 1 to entry: This is calculated as )Caabbh=+()()CIECIE CIECIE1221

49、22.3.3digital proofsoft-copy proof or hard-copy proof produced directly from digital data, on a display or a substrate, respectively3.4digital proof printdigital hard-copy proofdigital proof (3.3) produced as a reflection copy on a proofing substrate (3.5)3.5proofing substrateprinting substrate used for hard-copy proofing processes3.6halftone proofproof print made using the same screening technology (generally centre-weighted halftone dots) as the intended production printingNote 1 to entry: