BS ISO 12647-6-2012 Graphic technology Process control for the production of half-tone colour separations proofs and production prints Flexographic printing《印刷技术 网目调分色片、样张及印刷成品的生产过.pdf

《BS ISO 12647-6-2012 Graphic technology Process control for the production of half-tone colour separations proofs and production prints Flexographic printing《印刷技术 网目调分色片、样张及印刷成品的生产过.pdf》由会员分享，可在线阅读，更多相关《BS ISO 12647-6-2012 Graphic technology Process control for the production of half-tone colour separations proofs and production prints Flexographic printing《印刷技术 网目调分色片、样张及印刷成品的生产过.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS ISO 12647-6:2012Graphic technology Processcontrol for the production ofhalf-tone colour separations,proofs and production printsPart 6: Flexographic printingBS ISO 12647-6:2012+A1: 5BS ISO 12647-6:2012+A1:2015 BRITISH STANDARDNational forewordThis British Standard is the

2、UK implementation of ISO 12647-6:2012+A1:2015. It supersedes BS ISO 12647-6:2012 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to ISO text carry the number of the ISO amendment. For example, text altered b

3、y ISO amendment 1 is indicated by .The UK participation in its preparation was entrusted to Technical Committee PAI/43, Graphic technology.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary

4、provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 89520 3ICS 37.100.01Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was pu

5、blished under the authority of the Standards Policy and Strategy Committee on 31 December 2012.Amendments/corrigenda issued since publicationDate Text affected31 October 2015 Implementation of ISO amendment 1:2015BS ISO 12647-6:2012 ISO 2012Graphic technology Process control for the production of ha

6、lf-tone colour separations, proofs and production prints Part 6: Flexographic printingTechnologie graphique Contrle des processus de confection de slections couleurs trames, dpreuves et de tirages Partie 6: Processus flexographiqueINTERNATIONAL STANDARDISO12647-6Second edition2012-12-15Reference num

7、berISO 12647-6:2012(E)BS ISO 12647-6:2012ISO 12647-6:2012(E)ii ISO 2012 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2012All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including

8、photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.orgWeb www.iso.orgPublished in Switze

9、rlandBS ISO 12647-6:2012+A1:2015ISO 12647-6:2012+A1:2015(E)BS ISO 12647-6:2012ISO 12647-6:2012(E)ii ISO 2012 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2012All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,

10、 electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.

11、orgWeb www.iso.orgPublished in SwitzerlandBS ISO 12647-6:2012ISO 12647-6:2012(E) ISO 2012 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Requirements 24.1 General . 24.2 Material input requirements . 24.3 Printing aims. 45

12、 Reporting 8Annex A (informative) Communication of spot colour data . 9Annex B (informative) Printing curve for non-colour managed workflows .10Annex C (informative) Information exchange 11Annex D (informative) Determination of quality parameters of half-tone dots on a colour separation film 13Bibli

13、ography .15BS ISO 12647-6:2012+A1:2015ISO 12647-6:2012+A1:2015(E)BS ISO 12647-6:2012ISO 12647-6:2012(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normall

14、y carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the

15、work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare Inte

16、rnational Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of th

17、e elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 12647-6 was prepared by Technical Committee ISO/TC 130, Graphic technology.This second edition cancels and replaces the first edition (ISO 12647-6:2006

18、), which has been technically revised. This revision of this part of ISO 12647 has changed the intent of the document from a process control definition to a specification of the way to exchange the information necessary to define the printing characteristics of the desired product. To do this it has

19、 built on colour management technology and the exchange of colour characterization data.ISO 12647 consists of the following parts, under the general title Graphic technology Process control for the production of half-tone colour separations, proofs and production prints: Part 1: Parameters and measu

20、rement methods Part 2: Offset lithographic processes Part 3: Coldset offset lithography on newsprint Part 4: Publication gravure printing Part 5: Screen printing Part 6: Flexographic printing Part 7: Proofing processes working directly from digital data Part 8: Validation print processes working dir

21、ectly from digital dataiv ISO 2012 All rights reservedBS ISO 12647-6:2012+A1:2015ISO 12647-6:2012+A1:2015(E)BS ISO 12647-6:2012ISO 12647-6:2012(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of p

22、reparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental,

23、in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task

24、 of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention

25、is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 12647-6 was prepared by Technical Committee ISO/TC 130, Graphic technology.This second edition cancels and r

26、eplaces the first edition (ISO 12647-6:2006), which has been technically revised. This revision of this part of ISO 12647 has changed the intent of the document from a process control definition to a specification of the way to exchange the information necessary to define the printing characteristic

27、s of the desired product. To do this it has built on colour management technology and the exchange of colour characterization data.ISO 12647 consists of the following parts, under the general title Graphic technology Process control for the production of half-tone colour separations, proofs and prod

28、uction prints: Part 1: Parameters and measurement methods Part 2: Offset lithographic processes Part 3: Coldset offset lithography on newsprint Part 4: Publication gravure printing Part 5: Screen printing Part 6: Flexographic printing Part 7: Proofing processes working directly from digital data Par

29、t 8: Validation print processes working directly from digital dataiv ISO 2012 All rights reservedBS ISO 12647-6:2012ISO 12647-6:2012(E)IntroductionHistorically the ISO 12647 series of International Standards established the process control parameters and their aim values and tolerances for the most

30、important professional printing processes of the graphic arts industry. The initial concept was that the groundwork for the series was laid down in ISO 12647-1. This part of ISO 12647 differs from that concept because flexographic printing has changed significantly since ISO 12647 was initially conc

31、eived.This edition of this part of ISO 12647 differs from the earlier edition by not defining specific printing condition aims but instead requires that a specific reference printing condition (characterization data set) be specified. Flexographic printing differs from other printing procedures by u

32、sing a variety of printing machine architectures, ink sequence, ink types, anilox rollers, substrate types, etc. Each of these involve different printing condition and process control aims. This part of ISO 12647 requires that the colour of the printed product match a characterization data set or a

33、printing condition agreed upon by the provider and the receiver and specifies minimum requirements and tolerances to be communicated and produced.The purpose of a proof is to simulate the visual characteristics of the finished printed product as closely as possible, which often becomes a contractual

34、 agreement between provider and receiver. In order to visually simulate a particular printed product, off-press proofing processes might require values for various process control aims (e.g. solid tone colouration, tone value increase) which are different from those of the printing process they are

35、meant to simulate. This is caused by differences in phenomena such as gloss, light scatter (within the print substrate or the colourant), ink trap or overprint efficiency, metamerism and transparency. Such differences are likely for those off-press proofing processes in which the print substrate, th

36、e colourants and the technology for applying them are significantly different from flexographic printing. In such cases the user or the supplier needs to ensure that appropriate corrections are specified.Although this market uses colour proofing on electronic displays, and it was the intent of the a

37、uthors to reference the requirements for such proofing techniques, ISO/TC 130 has not yet defined a standard in this area that can be referenced. It is hoped that such work will progress and be available in the near future.In addition, work has started on ISO 17972, Graphic technology Colour data ex

38、change format. ISO 17972-4 will include exchange specifications for spot colour characterization data to facilitate the communication of spot colour data. ISO 2012 All rights reserved vBS ISO 12647-6:2012+A1:2015ISO 12647-6:2012+A1:2015(E)BS ISO 12647-6:2012BS ISO 12647-6:2012+A1:2015BS ISO 12647-6:

39、2012 BS ISO 12647-6:2012Graphic technology Process control for the production of half-tone colour separations, proofs and production prints Part 6: Flexographic printing1 ScopeThis part of ISO 12647 specifies the requirements for the exchange of data and information necessary for the definition of t

40、he aims for four-colour flexographic printing of packaging and publication materials, including newsprint. It is based on the use of colour characterization data to define the colourimetric printing aims and includes appropriate assignment of responsibility for and recommended tolerances on critical

41、 parameters of the flexographic printing process. This part of ISO 12647 is directly applicable to: publication flexographic printing including magazines, catalogues and commercial materials and packaging flexographic printing including labels, boxes, and flexible packages; half-tone and continuous

42、tone proofing processes that predict the colourimetric results of flexographic printing.Guidance is also provided concerning the definition of spot colours used in flexographic printing.2 Normative referencesThe following referenced documents are indispensable for the application of this document. F

43、or dated references, only the edition cited applies. For undated references, the latest edition of the reference document (including any amendments) applies.ISO 5-3, Photography and graphic technology Density measurements Part 3: Spectral conditionsISO 2846-5, Graphic technology Colour and transpare

44、ncy of printing ink sets for four-colour printing Part 5: Flexographic printingISO/TS 10128, Graphic technology Methods of adjustment of the colour reproduction of a printing system to match a set of characterization dataISO 12647-7, Graphic technology Process control for the production of half-tone

45、 colour separations, proof and production prints Part 7: Proofing processes working directly from digital dataISO 13655, Graphic technology Spectral measurement and colorimetric computation for graphic arts imagesISO 15930 (all parts), Graphic technology Prepress digital data exchange using PDF3 Ter

46、ms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1printing forme for flexographycylinder or sleeve covered with a relief type rubber or photopolymer plate for application of printing ink to print substrateSOURCE: ISO 2834-2:2007, definition 3.3INTERNAT

47、IONAL STANDARD ISO 12647-6:2012(E) ISO 2012 All rights reserved 1BS ISO 12647-6:2012Graphic technology Process control for the production of half-tone colour separations, proofs and production prints Part 6: Flexographic printing1 ScopeThis part of ISO 12647 specifies the requirements for the exchan

48、ge of data and information necessary for the definition of the aims for four-colo r flexographic printing of packaging a d publication materials,including newsprint. It i based on the use of colour characterization data to define the colourimetricprinting aims and includes appropriate as ignment of

49、responsib lity for and recommended t erances onc tical p rameters of th flexographic printing process. This part of ISO 12647 is directly applicable to: publication flexographic printing including magazines, catalogues and commercial materials and ackaging flexographic printing including labels, box , and flexible packages; half-tone and continuous tone proofing processes that predict the colourimetric results of flexographic printing.Guidance is also provided concerning the definition of sp