BS EN ISO 717-1-2013 Acoustics Rating of sound insulation in buildings and of building elements Airborne sound insulation《声学 建筑和建筑构件的隔声标定 空气隔声》.pdf

《BS EN ISO 717-1-2013 Acoustics Rating of sound insulation in buildings and of building elements Airborne sound insulation《声学 建筑和建筑构件的隔声标定 空气隔声》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 717-1-2013 Acoustics Rating of sound insulation in buildings and of building elements Airborne sound insulation《声学 建筑和建筑构件的隔声标定 空气隔声》.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN ISO 717-1:2013Acoustics Rating of soundinsulation in buildings and ofbuilding elementsPart 1: Airborne sound insulation (ISO717-1:2013)BS EN ISO 717-1:2013Incorporating corrigendum December 2015BS EN ISO 717-1:2013 BRITISH STANDARDNational forewordThis British Standard

2、 is the UK implementation of EN ISO 717-1:2013. It supersedes BS EN ISO 717-1:1997 which is withdrawn.The UK participation in its preparation was entrusted by Technical Committee EH/1, Acoustics, to Subcommittee EH/1/6, Building acoustics.A list of organizations represented on this subcommittee can

3、be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 83190 4ICS 91.120.20Compli

4、ance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2013.Amendments/corrigenda issued since publicationDate Text affected31 December 2015 Implementation of CEN Co

5、rrection Notice 20 March 2013: Supersession information in foreword correctedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 717-1 March 2013 ICS 91.120.20 Supersedes EN ISO 717-1:1996English Version Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airb

6、orne sound insulation (ISO 717-1:2013) Acoustique - valuation de lisolement acoustique des immeubles et des lments de construction - Partie 1: Isolement aux bruits ariens (ISO 717-1:2013) Akustik - Bewertung der Schalldmmung in Gebuden und von Bauteilen - Teil 1: Luftschalldmmung (ISO 717-1:2013) Th

7、is European Standard was approved by CEN on 5 January 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical refere

8、nces concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN

9、member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,

10、 France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCH

11、ES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 717-1:2013: EEN ISO 717-1:2013 (E) 3 Foreword This document (EN ISO 717-1:2013) has been prepared b

12、y Technical Committee ISO/TC 43 “Acoustics” in collaboration with Technical Committee CEN/TC 126 “Acoustic properties of building elements and of buildings” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an

13、 identical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall no

14、t be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 717-1:1996. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgari

15、a, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turke

16、y and the United Kingdom. Endorsement notice The text of ISO 717-1:2013 has been approved by CEN as EN ISO 717-1:2013 without any modification. BS EN ISO 717-1:2013EN ISO 717-1:2013 (E)BS EN ISO 717-1:2013ISO 717-1:2013(E) ISO 2013 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope

17、 . 12 Normative references 13 Terms and definitions . 14 Procedure for evaluating single-number quantities. 24.1 General . 24.2 Reference values 34.3 Sound spectra . 34.4 Method of comparison . 34.5 Calculation of spectrum adaptation terms . 85 Statement of results 85.1 General . 85.2 Statement of p

18、erformance of building elements . 95.3 Statement of requirements and of performance of buildings 9Annex A (informative) Use of spectrum adaptation terms .10Annex B (informative) Terms and spectra for an enlarged frequency range 12Annex C (informative) Examples of the calculation of single-number qua

19、ntities and spectrum adaptation terms .15Bibliography .18BS EN ISO 717-1:2013ISO 717-1:2013(E)BS EN ISO 717-1:2013ISO 717-1:2013(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing Intern

20、ational Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with

21、 ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical c

22、ommittees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the

23、 possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 717-1 was prepared by Technical Committee ISO/TC 43, Acoustics, Subcommittee SC 2, Building acoustics.This third edition ca

24、ncels and replaces the second edition (ISO 717-1:1996), which has been technically revised. It also incorporates the Amendment ISO 717-1:1996/Amd. 1:2006.The purpose of this revised version is to: allow weighting steps of 0,1 dB to be used for expression of uncertainty; update references.ISO 717 con

25、sists of the following parts, under the general title Acoustics Rating of sound insulation in buildings and of building elements: Part 1: Airborne sound insulation Part 2: Impact sound insulationiv ISO 2013 All rights reservedBS EN ISO 717-1:2013ISO 717-1:2013(E)BS EN ISO 717-1:2013ISO 717-1:2013(E)

26、ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a te

27、chnical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters

28、of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated t

29、o the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for

30、identifying any or all such patent rights.ISO 717-1 was prepared by Technical Committee ISO/TC 43, Acoustics, Subcommittee SC 2, Building acoustics.This third edition cancels and replaces the second edition (ISO 717-1:1996), which has been technically revised. It also incorporates the Amendment ISO

31、717-1:1996/Amd. 1:2006.The purpose of this revised version is to: allow weighting steps of 0,1 dB to be used for expression of uncertainty; update references.ISO 717 consists of the following parts, under the general title Acoustics Rating of sound insulation in buildings and of building elements: P

32、art 1: Airborne sound insulation Part 2: Impact sound insulationiv ISO 2013 All rights reservedBS EN ISO 717-1:2013ISO 717-1:2013(E)IntroductionMethods of measurement of airborne sound insulation of building elements and in buildings have been standardized e.g. in ISO 10140-2, ISO 140-4, and ISO 140

33、-5. The purpose of this part of ISO 717 is to standardize a method whereby the frequency-dependent values of airborne sound insulation can be converted into a single number characterizing the acoustical performance.References to standards which provide data for single-number evaluation are meant to

34、be examples and therefore are not complete. ISO 2013 All rights reserved vBS EN ISO 717-1:2013ISO 717-1:2013(E)BS EN ISO 717-1:2013BS EN ISO 717-1:2013BS EN ISO 717-1:2013 BS EN ISO 717-1:2013Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation

35、1 ScopeThis part of ISO 717:a) defines single-number quantities for airborne sound insulation in buildings and of building elements such as walls, floors, doors, and windows;b) takes into consideration the different sound level spectra of various noise sources such as noise sources inside a building

36、 and traffic outside a building;c) gives rules for determining these quantities from the results of measurements carried out in one-third-octave or octave bands in accordance with ISO 10140-2, ISO 140-4, and ISO 140-5.The single-number quantities in accordance with this part of ISO 717 are intended

37、for rating airborne sound insulation and for simplifying the formulation of acoustical requirements in building codes. An additional single-number evaluation in steps of 0,1 dB is indicated for the expression of uncertainty (except for spectrum adaptation terms). The required numerical values of the

38、 single-number quantities are specified according to varying needs. The single-number quantities are based on results of measurements in one-third-octave bands or octave bands.For laboratory measurements made in accordance with ISO 10140, single-number quantities should be calculated using one-third

39、-octave bands only.The rating of results of measurements carried out over an enlarged frequency range is dealt with in Annex B.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated referenc

40、es, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 140-4:1998, Acoustics Measurement of sound insulation in buildings and of building elements Part 4: Field measurements of airborne sound insulation between

41、 roomsISO 140-5:1998, Acoustics Measurement of sound insulation in buildings and of building elements Part 5: Field measurements of airborne sound insulation of faade elements and faadesISO 10140-2:2010, Acoustics Laboratory measurement of sound insulation of building elements Part 2: Measurement of

42、 airborne sound insulationISO 10848-2:2006, Acoustics Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms Part 2: Application to light elements when the junction has a small influence3 Terms and definitionsFor the purposes of this document, the fo

43、llowing terms and definitions apply.INTERNATIONAL STANDARD ISO 717-1:2013(E) ISO 2013 All rights reserved 1BS EN ISO 717-1:2013BS EN ISO 717-1:2013ISO 717-1:2013(E)3.1single-number quantity for airborne sound insulation ratingvalue, in decibels, of the reference curve at 500 Hz after shifting it in

44、accordance with the method specified in this part of ISO 717Note 1 to entry: Terms and symbols for the single-number quantity used depend on the type of measurement. Examples are listed in Table 1 for airborne sound insulation properties of building elements and in Table 2 for airborne sound insulat

45、ion in buildings. In general, new single-number quantities are derived in a similar way.3.2spectrum adaptation termvalue, in decibels, to be added to the single-number rating (e.g. Rw) to take account of the characteristics of particular sound spectraNote 1 to entry: Two sound spectra are defined (i

46、n one-third-octave bands and in octave bands) in this part of ISO 717.Note 2 to entry: Annex A gives information on the purpose of introducing these two spectrum adaptation terms.Table 1 Single-number quantities of airborne sound insulation properties of building elementsDerived from one-third-octav

47、e band valuesDefined inSingle-number quantity Term and symbolWeighted sound reduction index, RwSound reduction index, R ISO 10140-2:2010 Formula (2)Weighted normalized flanking level dif-ference, Dn,f,wNormalized flanking level difference, Dn,fISO 10848-2:2006 Formula (1)Weighted element-normalized

48、level dif-ference, Dn,e,wElement-normalized level difference, Dn,eISO 10140-2:2010 Formula (5)Table 2 Single-number quantities of airborne sound insulation in buildingsDerived from one-third-octave or octave band valuesDefined inSingle-number quantity Term and symbolWeighted apparent sound reduction

49、 index, RwApparent sound reduction index, RISO 140-4:1998 Formula (5)Weighted apparent sound reduction index, R45 ,wApparent sound reduction index, R45 ISO 140-5:1998 Formula (3)Weighted apparent sound reduction index, Rtr,s,wApparent sound reduction index, Rtr,sISO 140-5:1998 Formula (4)Weighted normalized level difference, Dn,wNormalized level difference, DnISO 140-4:1998 Formula (3)Weighted standardized level differ-ence, DnT,wStandardized level difference, DnTISO 140-4:1998 Formula (4)Weighted standardized l