BS EN 61076-2-104-2014 Connectors for electronic equipment Product requirements Circular connectors Detail specification for circular connectors with M8 screw-locking or snap-locki.pdf

《BS EN 61076-2-104-2014 Connectors for electronic equipment Product requirements Circular connectors Detail specification for circular connectors with M8 screw-locking or snap-locki.pdf》由会员分享，可在线阅读，更多相关《BS EN 61076-2-104-2014 Connectors for electronic equipment Product requirements Circular connectors Detail specification for circular connectors with M8 screw-locking or snap-locki.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationConnectors for electronic equipment Product requirementsPart 2-104:Circular connectors Detail specification for circular connectors with M8 screw-locking or snap-lockingBS EN 61076-2-104:2014National forewordThis British Standard is the UK implementation of EN 61076-2-104:20

2、14. It is identical to IEC 61076-2-104:2014. It supersedes BS EN 61076-2-104:2008which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/48, Electromechanical components and mechanical structures for electronic equipment.A list of organizations represented

3、on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 79251 9

4、ICS 31.220.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2014.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN

5、 61076-2-104:2014EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 61076-2-104 October 2014 ICS 31.220.10 Supersedes EN 61076-2-104:2008 English Version Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8

6、 screw-locking or snap-locking (IEC 61076-2-104:2014) Connecteurs pour quipements lectroniques - Exigencesde produit - Partie 2-104: Connecteurs circulaires - Spcification particulire pour les connecteurs circulaires M8 vis ou encliquetage (CEI 61076-2-104:2014) Steckverbinder fr elektronische Einri

7、chtungen - Produktanforderungen - Teil 2-104: Rundsteckverbinder - Bauartspezifikation fr Rundsteckverbinder M8 mit Schraub- oder Rastverriegelung (IEC 61076-2-104:2014) This European Standard was approved by CENELEC on 2014-10-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Re

8、gulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC

9、 member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official ve

10、rsions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, t

11、he Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische Normung CEN-CENELEC Manage

12、ment Centre: Avenue Marnix 17, B-1000 Brussels 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61076-2-104:2014 E EN 61076-2-104:2014 - 2 - Foreword The text of document 48B/2384/FDIS, future edition 2 of IEC 61076-2-104, prepa

13、red by SC 48B “Connectors“ of IEC/TC 48 “Electromechanical components and mechanical structures for electronic equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61076-2-104:2014. The following dates are fixed: latest date by which the document has to be implemen

14、ted at national level by publication of an identical national standard or by endorsement (dop) 2015-07-14 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2017-10-14 This document supersedes EN 61076-2-104:2008. Attention is drawn to the possibilit

15、y that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61076-2-104:2014 was approved by CENELEC as a European Stand

16、ard without any modification. BS EN 61076-2-104:2014- 3 - EN 61076-2-104:2014 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indis

17、pensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the re

18、levant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year IEC 60050 Series International Electrotechnical Vocabulary - - IEC 60068-1 2013 Environmental testing - Part 1

19、: General and guidance EN 60068-1 2014 IEC 60068-2-60 - Environmental testing - Part 2: Tests - Test Ke: Flowing mixed gas corrosion test EN 60068-2-60 - IEC 60352 Series Solderless connections EN 60352 Series IEC 60512 Series Connectors for electronic equipment - Tests and measurements EN 60512 Ser

20、ies IEC 60529 + A1 + A2 1989 1999 2013 Degrees of protection provided by enclosures (IP Code) EN 60529 corr. May + A1 + A2 1991 1993 2000 2013 IEC 60664-1 2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests EN 60664-1 2007 IEC 60998-2-1

21、- Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units EN 60998-2-1 - IEC 60999 Series Connecting devices - Electrical copper conductors - Safety requirements for

22、screw-type and screwless-type clamping units EN 60999 Series IEC 61076-1 2006 Connectors for electronic equipment - Product requirements - Part 1: Generic specification EN 61076-1 2006 BS EN 61076-2-104:2014EN 61076-2-104:2014 - 4 - Publication Year Title EN/HD Year IEC 61984 - Connectors - Safety r

23、equirements and tests EN 61984 - ISO 1302 - Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation EN ISO 1302 - BS EN 61076-2-104:2014 2 IEC 61076-2-104:2014 IEC 2014 CONTENTS 1 Scope 8 2 Normative references 8 3 Technical information 9 3.1 Terms

24、 and definitions 9 3.2 Recommended method of termination . 9 3.3 Number of contacts, ratings and characteristics 9 3.4 Creepage and clearance distances . 9 3.5 Marking . 10 3.6 Safety aspects 10 4 Dimensional information 10 4.1 General . 10 4.2 Survey of styles and variants 10 General . 10 4.2.1Fixe

25、d connectors . 10 4.2.2Free connectors . 12 4.2.34.3 Interface dimensions . 17 Pin front and side view A-coding 17 4.3.1Pin front view B-coding 19 4.3.24.4 Engagement (mating) information . 20 4.5 Gauges . 21 Sizing gauges and retention force gauges . 21 4.5.15 Characteristics 22 5.1 Climatic catego

26、ry 22 5.2 Electrical characteristics . 22 Rated voltage Rated impulse voltage Pollution degree . 22 5.2.1Voltage proof . 23 5.2.2Current-carrying capacity . 23 5.2.3Contact resistance . 23 5.2.4Insulation resistance 23 5.2.55.3 Mechanical characteristics 24 Mechanical operation . 24 5.3.1Insertion a

27、nd withdrawal forces . 24 5.3.2Contact retention in insert 24 5.3.3Polarizing method 24 5.3.4Vibration (sinusoidal) . 24 5.3.55.4 Other characteristics . 25 IP degree of protection 25 5.4.16 Test schedule 25 6.1 General . 25 Introductury remarks 25 6.1.1Arrangement for contact resistance measurement

28、s 25 6.1.2Arrangement for dynamic stress tests (vibration) . 26 6.1.36.2 Test schedule . 28 Test group P Preliminary 28 6.2.1Test group AP Dynamic/ Climatic 29 6.2.2BS EN 61076-2-104:2014IEC 61076-2-104:2014 IEC 2014 3 Test group BP Mechanical endurance . 31 6.2.3Test group CP Electrical load . 33 6

29、.2.4Test group DP Chemical resistivity . 34 6.2.5Test group EP Connection method tests . 34 6.2.6(informative) Diameter of the female connector body . 35 Annex AFigure 1 Tube insert, male contacts dip solder mounting, long version . 11 Figure 2 Tube insert, male contacts dip solder mounting, short v

30、ersion 11 Figure 3 Fixed connector with wire ends, male contacts, single hole mounting 11 Figure 4 Fixed connector with wire ends, female contacts, single hole mounting . 12 Figure 5 Rewireable connector, male contacts, straight version, with locking nut 13 Figure 6 Rewireable connector, male contac

31、ts, right angled version, with locking nut . 13 Figure 7 Non-rewireable connector, male contacts, straight version, snap-locking 14 Figure 8 Non-rewireable connector, male contacts, straight version, with locking nut 14 Figure 9 Non-rewireable connector, male contacts, right angled version, with loc

32、king nut 14 Figure 10 Rewireable connector, female contacts, straight version, with locking nut . 15 Figure 11 Rewireable connector, female contacts, right angled version, with locking nut . 15 Figure 12 Non-rewireable connector, female contacts, straight version, snap-locking 15 Figure 13 Non-rewir

33、eable connector, female contacts, right angled version, snap-locking 16 Figure 14 Non-rewireable connector, female contacts, straight version, with locking nut 16 Figure 15 Non-rewireable connector, female contacts, right angled version, with locking nut 16 Figure 16 Pin front view A-coding 17 Figur

34、e 17 Pin side view A-coding . 18 Figure 18 Contact position A-coding Front view 19 Figure 19 Pin front view B-coding 19 Figure 20 Contact position B-coding Front view 20 Figure 21 Engagement (mating) information . 20 Figure 22 Gauge dimensions . 22 Figure 23 Contact resistance arrangement . 26 Figur

35、e 24 Dynamic stress test arrangement . 27 Figure A.1 Diameter of the female connector body, coding variant A 35 Figure A.2 Shape of the female connector body, coding variant B 35 Table 1 Connector ratings related to coding and number of contacts 9 Table 2 Creepage and clearance distances 9 Table 3 S

36、tyles of fixed connectors . 10 Table 4 Styles of free connectors . 12 Table 5 Connector dimensions in mated and locked position 21 Table 6 Gauges . 22 Table 7 Climatic category. 22 Table 8 Rated voltage Rated impulse voltage Voltage proof . 23 Table 9 Voltage proof . 23 BS EN 61076-2-104:2014 4 IEC

37、61076-2-104:2014 IEC 2014 Table 10 Number of mechanical operations . 24 Table 11 Insertion and withdrawal forces . 24 Table 12 Number of test specimens . 25 Table 13 Test group P . 28 Table 14 Test group AP . 29 Table 15 Test group BP . 31 Table 16 Test group CP . 33 Table 17 Test group DP . 34 Tabl

38、e 18 Test group EP . 34 BS EN 61076-2-104:2014 8 IEC 61076-2-104:2014 IEC 2014 CONNECTORS FOR ELECTRONIC EQUIPMENT PRODUCT REQUIREMENTS Part 2-104: Circular connectors Detail specification for circular connectors with M8 screw-locking or snap-locking 1 Scope This part of IEC 61076 describes circular

39、 connectors M8 screw-locking or with nominal diameter 8 mm snap-locking, typically used for industrial process measurement and control. These connectors consist of fixed and free connectors either rewireable or non-rewireable. Male connectors have round contacts of diameter 0,6 mm, diameter 0,7 mm a

40、nd diameter 1,0 mm. Throughout this detail specification, dimensions are in mm. NOTE M8 is the dimension of the thread of the screw-locking mechanism of these circular connectors. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are

41、 indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050 (all parts): International Electrotechnical Vocabulary (available at http:/www.electropedia.or

42、g) IEC 60068-1:2013, Environmental testing - Part 1: General and guidance IEC 60068-2-60, Environmental testing Part 2: Tests Test Ke: Flowing mixed gas corrosion test IEC 60352 (all parts), Solderless connections IEC 60512 (all parts), Connectors for electronic equipment Tests and measurements IEC

43、60529:1989, Degrees of protection provided by enclosures (IP Code) Amendment 2:2013 Amendment 1:1999 IEC 60664-1:2007, Insulation coordination for equipment within low-voltage systems Part 1: Principles, requirements and tests IEC 60998-2-1, Connecting devices for low-voltage circuits for household

44、and similar purposes Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units IEC 60999 (all parts), Connecting devices Electrical copper conductors Safety requirements for screw-type and screwless-type clamping units BS EN 61076-2-104:2014IEC 6107

45、6-2-104:2014 IEC 2014 9 IEC 61076-1:2006, Connectors for electronic equipment Product requirements Part 1: Generic specification IEC 61984, Connectors Safety requirements and tests ISO 1302, Geometrical Product Specification (GPS) Indication of surface texture in technical product documentation 3 Te

46、chnical information 3.1 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 60050-581 apply. 3.2 Recommended method of termination The contact terminations shall be of the following types: screw, crimp, insulation piercing, insulation displacement, press-i

47、n or solder. 3.3 Number of contacts, ratings and characteristics Table 1 Connector ratings related to coding and number of contacts Coding Contacts Rated voltage Rated current A 3 50 V a.c./ 60 V d.c. 3 A A 4 50 V a.c./ 60 V d.c. 3 A A 6 30 V a.c./ 30 V d.c. 1,5 A A 8 30 V a.c./ 30 V d.c. 1,5 A B 5

48、30 V a.c./ 30 V d.c. 3 A Insulation resistance: 108 min. Climatic category: see 5.1, Table 7 Contact spacing: see Clause 4, dimensions 3.4 Creepage and clearance distances The permissible operating voltages, depends on the application and also on the safety requirements. The creepage and clearance d

49、istances in Table 2 are given as operating characteristics of mated connectors and shall be measured according to IEC 60512-1-2. The minimum values for clearance and creepage can be found in Table 2. Table 2 Creepage and clearance distances Dimensions are in millimeter Connector style and number of contacts Minimum distance between contacts and earth contact Minimum dista