BS EN 61076-2-102-2002 Connectors for electronic equipment - Circular connectors - Circular connectors with assessed quality - Detail specification for plugs and jacks for external.pdf

《BS EN 61076-2-102-2002 Connectors for electronic equipment - Circular connectors - Circular connectors with assessed quality - Detail specification for plugs and jacks for external.pdf》由会员分享，可在线阅读，更多相关《BS EN 61076-2-102-2002 Connectors for electronic equipment - Circular connectors - Circular connectors with assessed quality - Detail specification for plugs and jacks for external.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 61076-2-102: 2002 Connectors for electronic equipment Part 2-102: Circular connectors with assessed quality Detail specification for plugs and jacks for external low voltage power supply The European Standard EN 61076-2-102:2002 has the status of a British Standard ICS 31.220.

2、10 BS EN 61076-2-102:2002 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 9 August 2002 BSI 9 August 2002 ISBN 0 580 40220 7 National fore

3、word This British Standard is the official English language version of EN 61076-2-102:2002. It is identical with IEC 61076-2-102:2002. The UK participation in its preparation was entrusted by Technical Committee EPL/48, Electromechanical components and mechanical structures for electronic equipment,

4、 to Subcommittee EPL/48/2, Connectors for electronic equipment, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referre

5、d to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisio

6、ns of a contract. Users are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation,

7、or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 30, an inside back cover and a back cover.

8、The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 61076-2-102 NORME EUROPENNE EUROPISCHE NORM July 2002 CENELEC European Committee for Electrotechnical Standardization Comit Eu

9、ropen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61076-2-102:2002 E ICS 31.220

10、.10 English version Connectors for electronic equipment Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply (IEC 61076-2-102:2002) Connecteurs pour quipements lectroniques Partie 2-102: Connecteurs circulaires sous as

11、surance de la qualit - Spcification particulire pour fiches et embases pour le raccordement dune alimentation externe basse tension (CEI 61076-2-102:2002) Steckverbinder fr elektronische Einrichtungen Teil 2-102: Rundsteckverbinder mit bewerteter Qualitt - Bauartspezifikation fr Buchsen und Stpsel f

12、r externe Niederspannungs-Stromversorgung (IEC 61076-2-102:2002) This European Standard was approved by CENELEC on 2002-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national stand

13、ard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any othe

14、r language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland,

15、France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.EN 67016-2-01:20022 - 2 Foreword The text of document 48B/1206/FDIS, future edition 1 of IEC 61076-2-102, prepared by SC 48B, Connector

16、s, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61076-2-102 on 2002-07-01. The following dates were fixed: latest date by which the EN has to be implemented at national

17、level by publication of an identical national standard or by endorsement (dop) 2003-04-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2005-07-01 Les annexes appeles “normatives“ font partie du corps de la norme. Dans la prsente norme, lannexe ZA est

18、 normative. Lannexe ZA a t ajoute par le CENELEC. _ Endorsement notice The text of the International Standard IEC 61076-2-102:2002 was approved by CENELEC as a European Standard without any modification. _ Page2 EN610762102:2002-67016-22002:CEI 201 3 CONTENTS 1 Grenefni laormnoita 51 1.1 Scjbo dna e

19、pocet.51 2.1 Rcemomm dedneefo doht mgnitnuo.51 1.2.1 Nmureb fo ccatnost51 3.1 Rc dna gnitarahcaretiscits51 4.1 Nromavite refercnese 71 5.1 Mrakign .91 6.1 yt CEIsed epnoitangi91 7.1 Orredfni gniormnoita12 2 Tcecinhafni lormnoita12 1.2 Dfesnoitini .12 2.2 Sruvey fo sytlse .12 3.2 fnIromacilppa no noi

20、tnoita12 1.3.2 Cmoc etelpcennorot (riaps)12 2.3.2 Jcak (fxic decennorot)12 3.3.2 P( gulfrc eecennorot) .12 4.3.2 Accessorise.32 5.3.2 Srg/gnidleihgnidnuo .32 6.3.2 Bsaci ytfo ep retmnoitani32 4.2 Ccatnora trmegnastne .32 3 Dmisnefni lanoiormnoita .32 1.3 Grenela .32 2.3 sIomertci weiv c dnaommf noru

21、taese .32 1.2.3 Cmomf norutaese 32 2.2.3 Rferecnes eysmet52 3.2.3 Hmid thgiesnesnoi .52 4.2.3 Wmid htdisnesnoi 52 5.2.3 Dmid htpesnesnoi 52 3.3 Mfni gnitaormnoita.52 1.3.3 Mrid gnitaecnoit .52 2.3.3 Precidnepural m eht otarid gnitecnoit .52 3.3.3 cnInoitanil52 4.3 Jcaks (fxic decennorot)72 1.4.3 Dmi

22、snesnoi72 2.4.3 Tremisnoitan92 5.3 Psgul (frc eecennorots)92 1.5.3 Dmisnesnoi92 2.5.3 Tremisnoitan33 6.3 Accessorise.33 7.3 fni gnitnuoMormf noitaor jacks (fxic decennorots).33 1.7.3 Hrettap elon rp noraob detnisd .33 2.7.3 Mslenap no gnitnuo33 8.3 fni gnitnuoMormf noitaor sgulp (frc eecennorots)33

23、Page3 EN610762102:2002 61076-2-102 IEC:2002 3 TNOCENTS 1 General information 6 1.1 Scope and object.6 1.2 Recommended method of mounting.6 1.2.1 Number of contacts6 1.3 Rating and characteristics6 1.4 Normative references 7 1.5 Marking .8 1.6 IEC type designation8 1.7 Ordering information9 2 Technic

24、al information9 2.1 Definitions .9 2.2 Survey of styles .9 2.3 Information on application9 2.3.1 Complete connector (pairs)9 2.3.2 Jack (fixed connector)9 2.3.3 Plug (free connector) .9 2.3.4 Accessories10 2.3.5 Shielding/grounding 10 2.3.6 Basic type of termination.10 2.4 Contact arrangements 10 3

25、Dimensional information 10 3.1 General 10 3.2 Isometric view and common features 10 3.2.1 Common features .10 3.2.2 Reference system.11 3.2.3 Height dimensions 11 3.2.4 Width dimensions .11 3.2.5 Depth dimensions .11 3.3 Mating information11 3.3.1 Mating direction 11 3.3.2 Perpendicular to the matin

26、g direction 11 3.3.3 Inclination.11 3.4 Jacks (fixed connector).12 3.4.1 Dimensions.12 3.4.2 Terminations.13 3.5 Plugs (free connectors).13 3.5.1 Dimensions.13 3.5.2 Terminations.15 3.6 Accessories15 3.7 Mounting information for jacks (fixed connectors)15 3.7.1 Hole pattern on printed boards15 3.7.2

27、 Mounting on panels.15 3.8 Mounting information for plugs (free connectors).15 3egaP 2002:201267016NE-67016-22002:CEI 201 5 3.9 Gauges .15 3.9.1 Sizing gauges and retention force gauges 15 3.9.2 Endurance, insertion and withdrawal force gauges .15 3.9.3 Probes.16 3.9.4 Contact resistance gauge.16 3.

28、9.5 Test panel (for voltage proof test) 16 4 Characteristics17 4.1 Climatic category.17 4.2 Electrical .17 4.2.1 Creepage and clearance distance 17 4.2.2 Voltage proof .17 4.2.3 Current-carrying capacity.17 4.2.4 Initial contact resistance 17 4.2.5 Initial insulation resistance.18 4.3 Mechanical18 4

29、.3.1 Mechanical operation.18 4.3.2 Insertion and withdrawal forces19 4.3.3 Contact retention in insert 19 4.3.4 Polarizing method 19 5 Test schedule.19 5.1 General .19 5.1.1 Arrangement for contact resistance measurement20 5.1.2 Arrangement for dynamic stress tests 20 5.1.3 Arrangement for testing s

30、tatic load, axial20 5.1.4 Wiring of specimens 20 5.2 Test schedules 21 5.2.1 Basic (minimum) test schedule.21 5.2.2 Full test schedule.21 6 Quality assessment procedures 27 6.1 Qualification approval testing.27 6.1.1 Method 1 .27 6.1.2 Method 2 .27 6.2 Quality conformance inspection .28 6.2.1 Lot-by

31、-lot tests.28 6.2.2 Periodic tests.28 6.3 Delayed delivery, re-inspection 29 rugiFytS a1 elA e32 rugiFytS b1 elB e52 rugiFJ a2 eack stylA e.2.7 rugiFJ b2 eack stylB e.2.7 rugiFs gulP a3 etylA e .2.9 rugiFs gulP b3 etylB e .3.1 rugiFs eguag gulP a4 etylA e33 rugiFs eguag gulP b4 etylB e53 rugiFT 5 ee

32、st rarmegnac :tnecatnor tesistcnafo e crtnee celertedo93 rugiFT 6 eest rarmegnac :tnecatnor tesistcnafo e stuoicele edrtedo 93 Page4 EN610762102:2002 -67016-22002:CEI 201 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications .30-6701

33、6-22002:CEI 201 31 CONNECTORS FOR ELECTRONIC EQUIPMENT Part 2-102: Circular connectors with assessed quality Detail specification for plugs and jacks for external low voltage power supply INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC SC 48B Connectors IEC 61076-2-102 QC 480101XX0003 ELECTRONIC COMPO

34、NENTS OF ASSESSED QUALITY in accordance with IEC 61076-1: Generic specification Blank detail specification IEC 61076-2-001 Jacks (fixed connector) and plugs (free connectors) for coupling an external low voltage power supply Five voltage classifications to prevent mismating Performance level: 1 Asse

35、ssment level: G Combination of performance level and assessment level: 1G Information on the availability of components qualified to this detail specification is given in the qualified products list. IEC 1256/02 Page5 EN610762102:2002-67016-22002:CEI 201 51 1 General information 1.1 Scope and object

36、 This part of IEC 61076 applies to fixed connectors (jacks) and free connectors (plugs) for coupling an external low voltage power supply (hereinafter called plugs and jacks) to electronic products. The object of this part is to specify the dimensions, general requirements and tests for the jacks an

37、d plugs for use in electronic products. 1.2 Recommended method of mounting The plug (free cable connector) shall be connected to the cable for low voltage supply. Depending on the application, the jack (fixed connector) shall be fixed on internal printed circuit boards or attached to panels of elect

38、ronic product. 1.2.1 Number of contacts Not applicable. 1.3 Rating and characteristics The jacks (fixed connectors) and plugs (free connectors) have five voltage classifications as shown below. The appearance, construction and dimensions of the classifications prevent mismating. Voltage classificati

39、on Voltage range: V 3,15 (d.c. nominal value) 3,15 V 6,3 6,3 V 10,5 10,5 V 13,5 13,5 V 18,0 Current rating: 2 A Voltage proof: 500 V a.c. r.m.s. Insulation resistance: 100 M minimum (initial) Contact resistance: 50 m maximum (initial) Climatic category: 10/070/04 Page6 EN610762102:2002-67016-22002:C

40、EI 201 71 1.4 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-1, E

41、nvironmental testing Part 1: General and guidance Amendment 1 IEC 60410, Sampling plans and procedures for inspection by attributes IEC 60512 (all parts): Connectors for electronic equipment Tests and measurements IEC 60512-1-100: Connectors for electronic equipment Tests and measurements Part 1-100

42、: General Applicable publications IEC 61076-1, Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications Part 1: Generic specification Capability approval IEC 61076-2, Connectors for use in d.c., low frequency analogue and digital high spee

43、d data applications Part 2: Circular connectors with assessed quality Sectional specification ISO 1302, Technical drawings Method of indicating surface texture Page7 EN610762102:2002-67016-22002:CEI 201 91 1.5 Marking The marking of the connector (plug and jack) shall be in accordance with 2.6 of IE

44、C 61076-2. 1.6 IEC type designation The designation shall be derived in accordance with 2.5 of IEC 61076-2. “L“ stands for letter. “N“ stands for number. IEC 61076-2-102 Number of detail specification Letter(s) denoting the connector style Plugs (free connectors) P Jacks (fixed connectors) J Letter(

45、s) denoting design construction of the connector Style A A Style B B V 3,15 1 Number(s) denoting voltage 3,15 V 6,3 2 cassification of the connector 6,3 V 10,5 3 10,5 V 13,5 4 13,5 V 18,0 5 1: Terminal of centre electrode 2: Terminal of sleeve spring 3: Terminal of break-shunt A Letter(s) denoting c

46、ircuit type of the jack (fixed connector) 1: Terminal of centre electrode 2: Terminal of sleeve spring 3: Terminal of break-shunt 4: Terminal of make-shunt B 1: Terminal of centre electrode 2: Terminal of sleeve spring 3: Terminal of sleeve spring 4: Terminal of break-shunt 1: Terminal of centre ele

47、ctrode 2: Terminal of sleeve spring 3: Terminal of break-shunt 4: Terminal of transfer spring 5: Terminal of break-shunt C EXAMPLE IEC 61076-2-102 PA2A: Plug (free connector)/style A/voltage classification 3,15V 6,3/circuit type A LLNL 1 3 2 1 3 2 4 1 4 3 2 1 2 3 4 5 Page8 EN610762102:2002-67016-220

48、02:CEI 201 12 1.7 Ordering information For ordering connectors according to this detail specification, the type designation described in 1.6 shall be used. 2 Technical information 2.1 Definitions For the purpose of this part of IEC 61076, the definitions in 2.1 of IEC 61076-2 apply. 2.2 Survey of st

49、yles Table 1 Survey of styles Jack (fixed connector) Plug (free connector) Style A B 2.3 Information on application See clause 3 and 4.2.1. 2.3.1 Complete connector (pairs) The jacks and plugs shall be coupled with unified polarity for an external low voltage power supply to electronic products. The outside electrode of the plug s