BS EN 60870-6-503-2014 Telecontrol equipment and systems Telecontrol protocols compatible with ISO standards and ITU-T recommendations TASE 2 Services and protocol《遥测设备和系统 符合ISO标准和.pdf

《BS EN 60870-6-503-2014 Telecontrol equipment and systems Telecontrol protocols compatible with ISO standards and ITU-T recommendations TASE 2 Services and protocol《遥测设备和系统 符合ISO标准和.pdf》由会员分享，可在线阅读，更多相关《BS EN 60870-6-503-2014 Telecontrol equipment and systems Telecontrol protocols compatible with ISO standards and ITU-T recommendations TASE 2 Services and protocol《遥测设备和系统 符合ISO标准和.pdf（156页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationTelecontrol equipment and systemsPart 6-503: Telecontrol protocols compatible with ISO standards and ITU-T recommendations TASE.2 Services and protocolBS EN 60870-6-503:2014National forewordThis British Standard is the UK implementation of EN 60870-6-503:2014. It is identica

2、l to IEC 60870-6-503:2014. It supersedes BS EN 60870-6-503:2002which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PEL/57, Power systems management and associated information exchange.A list of organizations represented on this committee can be obtained onr

3、equest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 78271 8ICS 33.200Compliance with a British S

4、tandard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2014.Amendments issued since publicationDate Text affectedBRITISH STANDARDBS EN 60870-6-503:2014EUROPEAN STANDARD NORME EUROPENNE E

5、UROPISCHE NORM EN 60870-6-503 October 2014 ICS 33.200 Supersedes EN 60870-6-503:2002 English Version Telecontrol equipment and systems - Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Services and protocol (IEC 60870-6-503:2014) Matriels et systmes

6、 de tlconduite - Partie 6-503: Protocoles de tlconduite compatibles avec les normes ISO et les recommandations de lUIT-T - Services et protocole TASE.2 (CEI 60870-6-503:2014) Fernwirkeinrichtungen und -systeme - Teil 6-503: Fernwirkprotokolle, die mit ISO-Normen und ITU-T-Empfehlungen kompatibel sin

7、d - TASE.2-Dienste und -Protokoll (IEC 60870-6-503:2014) This European Standard was approved by CENELEC on 2014-08-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard with

8、out any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any ot

9、her language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyp

10、rus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and t

11、he United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CENELEC All rights of exploitation in any form and by any

12、means reserved worldwide for CENELEC Members. Ref. No. EN 60870-6-503:2014 E BS EN 60870-6-503:2014EN 60870-6-503:2014 - 2 - Foreword The text of document 57/1453/FDIS, future edition 3 of IEC 60870-6-503, prepared by IEC/TC 57 “Power systems management and associated information exchange“ was submi

13、tted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60870-6-503:2014. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-05-19 latest date by which the

14、national standards conflicting with the document have to be withdrawn (dow) 2017-08-19 This document supersedes EN 60870-6-503:2002. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible

15、for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60870-6-503:2014 was approved by CENELEC as a European Standard without any modification. BS EN 60870-6-503:2014- 3 - EN 60870-6-503:2014 Annex ZA (normative) Normative references to internat

16、ional publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of t

17、he referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is availa

18、ble here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60870-6-702 2014 Telecontrol equipment and systems - Part 6-702: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Functional profile for providing the TASE.2 application service in end systems EN 60870-6-7

19、02 2014 IEC 60870-6-802 2014 Telecontrol equipment and systems - Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Object models EN 60870-6-802 2014 IEC 61970-452 2013 Energy management system application program interface (EMS-API) - Part 452: CIM st

20、atic transmission network model profiles EN 61970-452 2013 IEC 61970-552 2013 Energy Management System Application Program Interface (EMS-API) - Part 552: CIMXML Model Exchange Format EN 61970-552 2014 IEC/TS 62351-4 2007 Power systems management and associated information exchange - Data and commun

21、ications security - Part 4: Profiles including MMS - - ISO 9506-1 2003 Industrial automation systems - Manufacturing Message Specification - Part 1: Service definition - - ISO 9506-2 2003 Industrial automation systems - Manufacturing Message Specification - Part 2: Protocol specification - - BS EN 6

22、0870-6-503:2014 2 IEC 60870-6-503:2014 IEC 2014 CONTENTS INTRODUCTION . 10 1 Scope 11 1.1 General . 11 1.2 Control centre . 11 1.3 Architecture 11 1.4 Network Model 12 1.5 Relation between TASE.2 and MMS 13 2 Normative references 13 3 Terms and definitions 14 4 Abbreviations 16 5 TASE.2 Model . 17 5

23、.1 General . 17 5.2 Informal TASE.2 Model Description . 17 5.2.1 General . 17 5.2.2 Associations 18 5.2.3 Bilateral agreements, bilateral tables and access control . 19 5.2.4 Data Value objects and services 20 5.2.5 Data Set objects and services . 21 5.2.6 Account Objects and Services . 21 5.2.7 Inf

24、ormation Message object and services 21 5.2.8 Transfer Set objects and services 21 5.2.9 Common Data Transfer mechanisms . 24 5.2.10 Special Transfer objects and services 25 5.2.11 Device objects and services 26 5.2.12 Program objects and services 27 5.2.13 Event Enrollment objects and services . 27

25、 5.2.14 Event Condition objects and services 27 5.3 Formal TASE.2 model description . 27 5.3.1 General . 27 5.3.2 General access control requirements . 29 5.3.3 Association management . 30 5.3.4 Bilateral Tables . 32 5.3.5 List of Access Control Specification . 33 5.3.6 Data values . 34 5.3.7 Data S

26、ets 35 5.3.8 Accounts . 37 5.3.9 Information Messages 37 5.3.10 Transfer Sets . 38 5.3.11 Special Transfer objects 43 5.3.12 Devices . 44 5.3.13 Programs . 46 5.3.14 Event Enrollments . 46 5.3.15 Event Conditions . 46 6 Mapping of TASE.2 Object Models onto MMS Object Models . 46 6.1 General . 46 BS

27、EN 60870-6-503:2014IEC 60870-6-503:2014 IEC 2014 3 6.2 Object modelling notation 46 6.3 The virtual control centre (VCC) 47 6.3.1 General . 47 6.3.2 TASE.2 Domain mapping . 47 6.3.3 TASE.2 Control Centre mapping 48 6.3.4 OSI Application Processes, Application Entities and Addressing 48 6.4 Associati

28、on object model mapping 48 6.5 Bilateral Table object model mapping 49 6.6 Data Value object model mapping . 50 6.7 Data Set object model mapping 51 6.8 Information Message object model mapping 52 6.9 Transfer Set object model mapping . 53 6.9.1 General . 53 6.9.2 Data Set Transfer Set object model

29、mapping . 53 6.9.3 Information Message Transfer Set object model mapping 55 6.10 Next Transfer Set object model mapping . 56 6.11 Transfer Set Name object model mapping . 56 6.12 Conditions object model mapping 56 6.13 Event Code object model mapping 57 6.14 Transfer Set Time Stamp object model mapp

30、ing . 57 6.15 Device object model mapping . 57 7 Mapping of TASE.2 operations and actions onto MMS services . 58 7.1 General . 58 7.2 Use of MMS services 59 7.2.1 General . 59 7.2.2 Association Management Mapping to MMS 59 7.2.3 Data Value operations mapping to MMS 62 7.2.4 Data Set operations mappi

31、ng to MMS 66 7.2.5 Transfer Set operations and actions mapping to MMS . 73 7.2.6 Device operations and actions mapping to MMS 81 7.2.7 Summary of TASE.2 operations . 86 8 Standardized Application-specific objects 88 8.1 General . 88 8.2 Named Type objects . 88 8.2.1 General . 88 8.2.2 Visible-String

32、-32 Type . 88 8.2.3 MMS ObjectName 88 8.2.4 Time Stamp Types . 89 8.2.5 TimeStampExtended Type . 89 8.2.6 Time Interval Types . 90 8.2.7 TransferSet Types . 90 8.2.8 Conditions Types . 92 8.2.9 SupportedFeatures Type . 93 8.2.10 TASE.2Version Type . 93 8.3 Named Variable Objects . 94 8.3.1 General .

33、 94 8.3.2 “Supported_Features“ 94 8.3.3 “Bilateral_Table_ID“ 94 8.3.4 “TASE.2_Version“ 94 BS EN 60870-6-503:2014 4 IEC 60870-6-503:2014 IEC 2014 8.3.5 Data Value objects 94 8.3.6 Transfer Set objects 95 8.3.7 “Next_DSTransfer_Set“ . 95 8.3.8 “Transfer_Set_Name“ 95 8.3.9 “IM_Transfer_Set“ . 95 8.3.10

34、 “DSConditions_Detected“ 95 8.3.11 “Transfer_Set_Time_Stamp“ 96 8.3.12 “Transfer_Report_ACK“ . 96 8.3.13 “Transfer_Report_NACK“. 96 8.4 Named Variable List objects 96 8.5 Information Message objects 96 9 Use cases for semantic integration with IEC 61970 . 97 9.1 General . 97 9.2 Use Case 1: Determin

35、ing what Measurement/MeasurementValues are available . 97 9.2.1 General . 97 9.2.2 Use Case 1a: Determining information associated to equipment 97 9.2.3 Use Case 1b: Determining Measurement information for non-equipment related measurements . 98 9.3 Use Case 2: Exchange of Bilateral Table informatio

36、n 98 10 Bilateral Table semantic model 98 10.1 General . 98 10.2 IEC 61970-452 Classes 100 10.2.1 Command 100 10.2.2 Control 100 10.2.3 IdentifiedObject . 100 10.2.4 DiscreteCommand . 101 10.2.5 MeasurementValue 101 10.2.6 Setpoint . 101 10.3 ICCP Specific Classes 102 10.3.1 ICCPAccessPoint 102 10.3

37、.2 ICCPCommandPoint 102 10.3.3 ICCPControlPoint 103 10.3.4 ICCP IndicationPoint . 103 10.3.5 ICCPInformationMessage 104 10.3.6 ICCPPoint 104 10.3.7 ICCPSetPoint 104 10.3.8 ISOAPAddress . 105 10.3.9 ISOUpperLayer 105 10.3.10 TASE2BilateralTable . 105 10.3.11 TCP_AccessPoint 106 10.3.12 Enumerations 1

38、06 11 Conformance . 107 Annex A (normative) TASE.2 Operations and actions summary . 108 Annex B (informative) Quality of Service (QOS), Routing and Priority 110 B.1 General . 110 B.2 Background. 110 B.3 TASE.2 Requirements . 111 B.3.1 General . 111 BS EN 60870-6-503:2014IEC 60870-6-503:2014 IEC 2014

39、 5 B.3.2 Transport layer 111 B.4 Network layer 112 Annex C (informative) TASE.2 Operations and actions summary . 113 Annex D (informative) TASE.2 (2002) Additional Model Elements 114 D.1 General . 114 D.2 Informal TASE.2 Model Description . 114 D.2.1 General . 114 D.2.2 Bilateral Agreements, Bilater

40、al Tables and access control . 114 D.2.3 Account objects and services. 114 D.2.4 Program objects and services 115 D.2.5 Event Enrollment objects and services . 115 D.2.6 Event Condition objects and services 115 D.3 Formal TASE.2 Model description . 116 D.3.1 General . 116 D.3.2 Accounts . 116 D.3.3

41、Accounts models . 116 D.3.4 Transfer Sets . 116 D.3.5 Transfer Account Transfer Set object model 119 D.3.6 Information Message Transfer Set object model 121 D.3.7 Special Transfer Sets 121 D.3.8 Programs . 122 D.3.9 Event Enrollments . 123 D.3.10 Event Conditions . 124 Annex E (informative) Mapping

42、of TASE.2 (2002) object models onto MMS object models 125 E.1 General . 125 E.2 Bilateral Table object model mapping 125 E.3 Time Series Transfer Set object model mapping . 125 E.3.1 General . 125 E.3.2 TSTransmissionPars Object Model Mapping 126 E.4 Account Object Model Mapping . 127 E.5 Transfer S

43、et Object Model Mapping 127 E.5.1 Transfer Account Transfer Set Object Model Mapping . 127 E.5.2 TATransmissionPars Object Model Mapping 127 E.6 Program Object Model Mapping 127 E.7 Event Enrollment Object Model Mapping . 128 E.8 Conditions Object Model Mapping . 129 E.8.1 General . 129 E.8.2 Event

44、Condition Object Model Mapping . 129 Annex F (informative) Mapping of TASE.2 (2002) Operations and Actions onto MMS Services 131 F.1 General . 131 F.2 Use of MMS Services 131 F.2.1 Association Management Mapping . 131 F.2.2 Transfer Set Operation and Action Mapping . 131 F.2.3 Condition Monitoring M

45、apping . 132 F.2.4 Get Next TSTransfer Set Value Operation Mapping . 136 F.2.5 Account Operations and Actions Mapping 137 F.2.6 Query Mapping 137 BS EN 60870-6-503:2014 6 IEC 60870-6-503:2014 IEC 2014 F.2.7 Program Operations Mapping to MMS . 138 F.2.8 Event Enrollment Operations Mapping to MMS 142

46、F.2.9 Event Condition Actions Mapping onto MMS Event Notification Action Mapping 144 F.2.10 Summary of TASE.2 Operations 144 Annex G (informative) TASE.2 (2002) Standardized Application-specific Objects . 146 G.1 General . 146 G.2 Named Type Objects 146 G.2.1 General . 146 G.2.2 TransferSet Types .

47、146 G.2.3 SupportedFeatures Type . 147 G.2.4 Conditions Types . 147 G.3 Named Variable Objects . 148 G.3.1 General . 148 G.3.2 “Next_TSTransfer_Set“ 148 G.3.3 “TSConditions_Detected“ . 148 G.3.4 “TA_Transfer_Set“ . 148 G.3.5 “TAConditions_Detected“ . 149 G.3.6 “Event_Code_Detected“ 149 G.3.7 Informa

48、tion Message Objects 149 G.4 Event Condition Objects 149 Figure 1 Protocol relationships . 12 Figure 2 TASE.2 network topologies 13 Figure 3 Informal TASE.2 Model 18 Figure 4 Transfer DataSet reporting mechanism 23 Figure 5 General Transfer reporting mechanism 24 Figure 6 Relationship between TASE.2

49、 and real control centres 28 Figure 7 TASE.2 server components 58 Figure 8 TASE.2 Server association control elements 60 Figure 9 Data Value operations 63 Figure 10 Sequence of Get Data Value 64 Figure 11 Data Set operations . 67 Figure 12 Sequence of Create Data Set operation . 69 Figure 13 Sequence of Delete Data Set . 70 Figure 14 Transfer Set services . 74 Figure 15 Device operations 81 Figure 16 Sequence of Device Control . 82 Figure 17 Measurements and network models . 97 Figure 18 CIM