BS EN 50083-9-2002 Cabled distribution systems for television and sound signals - Interfaces for CATV SMATV headends and similar professional equipment for DVB MPEG-2 transport str.pdf

《BS EN 50083-9-2002 Cabled distribution systems for television and sound signals - Interfaces for CATV SMATV headends and similar professional equipment for DVB MPEG-2 transport str.pdf》由会员分享，可在线阅读，更多相关《BS EN 50083-9-2002 Cabled distribution systems for television and sound signals - Interfaces for CATV SMATV headends and similar professional equipment for DVB MPEG-2 transport str.pdf（57页珍藏版）》请在麦多课文档分享上搜索。

1、Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 26 June 2003, Uncontrolled Copy, (c) BSIBRITISH STANDARD BS EN 50083-9:2002 Cable networks for television signals, sound signals and interactive services Part 9: Interfaces for CATV/SMATV headends and similar professional equi

2、pment for DVB/MPEG-2 transport streams The European Standard EN 50083-9:2002 has the status of a British Standard ICS 33.060.40 Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 26 June 2003, Uncontrolled Copy, (c) BSIBS EN 50083-9:2002 This British Standard was published und

3、er the authority of the Standards Policy and Strategy Committee on 13 February 2003 BSI 13 February 2003 ISBN 0 580 41271 7 National foreword This British Standard is the official English language version of EN 50083-9:2002. It supersedes BS EN 50083-9:1999 which is withdrawn. The UK participation i

4、n its preparation was entrusted to Technical Committee EPL/100, Audio, video and multimedia systems and equipment, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implemen

5、t international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does n

6、ot purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European c

7、ommittee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2

8、to 53 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 26 June 2003, Uncontrolled Copy, (c) BSIEUROPEAN

9、 STANDARD EN 50083-9 NORME EUROPENNE EUROPISCHE NORM December 2002 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC

10、- All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50083-9:2002 E ICS 33.060.40 Supersedes EN 50083-9:1998English version Cable networks for television signals, sound signals and interactive services Part 9: Interfaces for CATV/SMATV headend

11、s and similar professional equipment for DVB/MPEG-2 transport streams Rseaux de distribution par cbles destins aux signaux de radiodiffusion sonore, de tlvision et aux services interactifs Partie 9: Interfaces pour les ttes de rsaux pour antennes communautaires, antennes collectives par satellite et

12、 matriels professionnels analogues pour les flux transport DVB/MPEG-2 Kabelnetze fr Fernsehsignale, Tonsignale und interaktive Dienste Teil 9: Schnittstellen fr CATV-/SMATV-Kopfstellen und vergleichbare professionelle Gerte fr DVB/MPEG-2-Transportstrme This European Standard was approved by CENELEC

13、on 2002-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards m

14、ay be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified t

15、o the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slo

16、vakia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 26 June 2003, Uncontrolled Copy, (c) BSIEN 50083-9:2002 - 2 - Foreword This European Standard was prepared by CENELEC Technical Committee TC 209, “Cable networks for televi

17、sion signals, sound signals and interactive services“ on the basis of EN 50083-9:1998 and a draft amendment to which was submitted to the Unique Acceptance Procedure. The amendment was approved by CENELEC on 2002-07-01 to be published as part of a third edition of EN 50083-9. The following dates wer

18、e fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2003-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2005-07-01 Annexes designated “normative“ ar

19、e part of the body of the standard. Annexes designated “informative“ are given for information only. In this standard, annexes A and B are normative and annexes C, D, E, F and G are informative. _ Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 26 June 2003, Uncontrolled Co

20、py, (c) BSI - 3 - EN 50083-9: 2002 Contents Page 1 Scope. 5 1.1 General. 5 1.2 Specific scope of this part 9 5 2 Normative references. 6 3 Terms, definitions and abbreviations 7 3.1 Terms and definitions . 7 3.2 Abbreviations 8 4 Interfaces for MPEG-2 data signals 9 4.1 Introduction. 8 4.2 Synchrono

21、us parallel interface (SPI). 12 4.3 Synchronous Serial Interface (SSI). 17 4.4 Asynchronous Serial Interface (ASI). 17 Annex A (normative) Synchronous Serial Interface (SSI) 18 Annex B (normative) Asynchronous Serial Interface (ASI) 28 Annex C (informative) 8B/10B tables. 36 Annex D (informative) Im

22、plementation guidelines and clock recovery from the Synchronous Serial Interface (SSI) 40 Annex E (informative) Implementation guidelines and deriving clocks from the MPEG-2 packets for the ASI . 44 Annex F (informative) Guidelines for the implementation and usage of the DVB Asynchronous Serial Inte

23、rface 48 Annex G (informative) Bibliography. 53 Figures Figure 1 - Protocol stack for 188 byte packets . 10 Figure 2 - Protocol stack for 204 byte packets . 10 Figure 3 - Packet structure of 188 byte packet. 10 Figure 4 - Packet structure of 204 byte packet. 10 Figure 5 - System for parallel transmi

24、ssion . 12 Figure 6 - Transmission format with 188 byte packets . 13 Figure 7 - Transmission format with 204 byte packets (188 data bytes and 16 dummy bytes) . 13 Figure 8 - Transmission format with RS-coded packets (204 bytes; 188 data bytes and 16 valid extra bytes) as specified in EN 300 421 . 13

25、 Figure 9 - Clock to data timing (at source) . 14 Figure 10 - Line driver and line receiver interconnection 15 Figure 11 - Idealized eye diagramme corresponding to the minimum input signal level . 16 Figure A.1 - Example of cascaded interfaces . 18 Licensed Copy: Wang Bin, ISO/Exchange China Standar

26、ds Information Centre, 26 June 2003, Uncontrolled Copy, (c) BSIEN 50083-9:2002 - 4 - Figure A.2 - Coaxial cable-based synchronous serial transmission link (SSI type)19 Figure A.3 - Fibre-optic-based synchronous serial transmission link (SSI type)19 Figure A.4 - Pulse mask for logical 0 22 Figure A.5

27、 - Pulse mask for logical 1 23 Figure A.6 - Biphase Mark encoding.26 Figure B.1 - Coaxial cable-based asynchronous serial transmission link (ASI type)28 Figure B.2 - Fibre-optic-based asynchronous serial transmission link (ASI type) 29 Figure B.3 - Serial link Layer-0 reference points .30 Figure B.4

28、 - Coaxial transmitter test circuit .31 Figure B.5 - Transmitter eye diagramme for jitter32 Figure B.6 - Spectral width of transmitter33 Figure B.7 - Transmission format with data packets (example for 188 bytes) .35 Figure B.8 - Transmission format with data bursts (example for 188 bytes)35 Figure D

29、.1 - Connection of the adapter modules 40 Figure D.2 - Example of implementation of an emitting module 41 Figure D.3 - Example of implementation of a receiving module 42 Figure D.4 - Example of implementation of a flexible data rate receiving module for SSI . Figure E.1 - ASI link with output clock

30、from following application or alternative with clock recovery.44 Figure E.2 - Phase Locked Loop for clock generation.45 Figure F.1 - Abstract ASI transmission model.48 Figure F.2 - Random aperiodic transport stream rate and buffer utilisation.50 Figure F.3 - Deterministic aperiodic transport stream

31、rate and buffer utilisation50 Tables Table 1 - Mandatory and optional packet lengths11 Table 2 - Contact assignment of 25 contact type D subminiature connector (ISO 2110) 17 Table A.1 - Transmitter output characteristics.21 Table A.2 - Receiver input characteristics.21 Table A.3 - Optical characteri

32、stics for SSI links 24 Table B.1 - Electrical characteristic specifications for ASI link 31 Table B.2 - Chromatic dispersion requirements 32 Table B.3 - Optical characteristic specifications for ASI link33 Table C.1 - Valid data characters36 Table C.2 - Valid special characters .38 Table C.3 - Delay

33、ed code violation example .39 Table E.1 - Analysis of 10 kHz clock generating loop, 50 s jitter46 Table E.2 - Analysis of 10 kHz clock generating loop, 2 ms jitter.47 Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 26 June 2003, Uncontrolled Copy, (c) BSI - 5 - EN 50083-9:

34、2002 1 Scope 1.1 General Standards of EN 50083 series deal with cable networks for television signals, sound signals and interactive services including equipment, systems and installations for headend reception, processing and distribution of television and sound signals and their associated data si

35、gnals and for processing, interfacing and transmitting all kinds of signals for interactive services using all applicable transmission media. All kinds of networks like CATV-networks, MATV-networks and SMATV-networks, Individual receiving networks and all kinds of equipment, systems and installation

36、s installed in such networks, are within this scope. The extent of this standardization work is from the antennas, special signal source inputs to the headend or other interface points to the network up to the system outlet or the terminal input, where no system outlet exists. The standardization of

37、 any user terminals (i.e. tuners, receivers, decoders, multimedia terminals etc.) as well as of any coaxial and optical cables and accessories therefor is excluded. 1.2 Specific scope of this part 9 This standard describes physical interfaces for the interconnection of signal processing devices for

38、professional CATV/SMATV headend equipment or for similar systems, such as in uplink stations. Especially this document specifies the transfer of DVB/MPEG-2 data signals in the standardized transport layer format between devices of different signal processing functions. RF interfaces and interfaces t

39、o telecom networks are not covered in this document. In addition references are made to all other parts of EN 50083 series (Cable networks for television signals, sound signals and interactive services) and in particular for RF, video and audio interfaces to part 5: “Headend equipment“. For connecti

40、ons to telecom networks a special Data Communication Equipment (DCE) is necessary to adapt the serial or parallel interfaces specified in this document to the bitrates and transmission formats of the public Plesiochronic Digital Hierarchy (PDH) networks. Other emerging technologies such as Connectio

41、nless Broadband Data Services (CBDS), Synchronous Digital Hierarchy (SDH), Asynchronous Transfer Mode (ATM) etc. can be used for transmitting MPEG-2 Transport Streams (TS) between remote locations. ATM is particularly suitable for providing bandwidth on demand and it allows for high data rates. Lice

42、nsed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 26 June 2003, Uncontrolled Copy, (c) BSIEN 50083-9:2002 - 6 - 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at th

43、e appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the

44、 publication referred to applies. EN 50083 Cable networks for television signals, sound signals and interactive services EN 50083-1 1993 Part 1: Safety requirements + A1 1997 + A2 1997 EN 50083-2 2001 Part 2: Electromagnetic compatibility for equipment EN 50083-3 2002 Part 3: Active wideband equipme

45、nt for coaxial cable networks EN 50083-4 1998 Part 4: Passive wideband equipment for coaxial cable networks EN 50083-5 2001 Part 5: Headend equipment EN 50083-6 1997 Part 6: Optical equipment EN 50083-7 1996 Part 7: System performance + A1 2000 EN 50083-8 2002 Part 8: Electromagnetic compatibility f

46、or networks EN 60793-2-10 2002 Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres (IEC 60793-2-10:2002) EN 60793-2-50 2002 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres (IEC 60793

47、-2-50:2002) EN ISO/IEC 13818-1 1997 Information technology - Generic coding of moving pictures and associated audio information - Part 1: Systems (ISO/IEC 13818-1:1996) EN ISO/IEC 13818-9 2000 Information technology - Generic coding of moving pictures and associated audio information - Part 9: Exten

48、sion for real-time interface for systems decoders (ISO/IEC 13818-9:1996) EN 300 421 1997 Digital Video Broadcasting (DVB) - Framing structure, channel coding and modulation for 11/12 GHz satellite services EN 300 429 1997 Digital Video Broadcasting (DVB) - Framing structure, channel coding and modul

49、ation for cable systems Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 26 June 2003, Uncontrolled Copy, (c) BSI - 7 - EN 50083-9: 2002 EN 300 473 1997 Digital Video Broadcasting (DVB) - Satellite Master Antenna Television (SMATV) distribution systems ETR 290 1997 Digital Video Broadcasting (DVB) - Measurement guidelines for DVB systems IEC 60169-8 1978 Radio frequency connectors - Part 8: RF coaxial connectors with inner diameter of