BS EN 16582-3-2015 Domestic swimming pools Specific requirements including safety and test methods for aboveground pools《室内游泳池 包括地上游泳池安全和试验方法在内的特殊要求》.pdf

《BS EN 16582-3-2015 Domestic swimming pools Specific requirements including safety and test methods for aboveground pools《室内游泳池 包括地上游泳池安全和试验方法在内的特殊要求》.pdf》由会员分享，可在线阅读，更多相关《BS EN 16582-3-2015 Domestic swimming pools Specific requirements including safety and test methods for aboveground pools《室内游泳池 包括地上游泳池安全和试验方法在内的特殊要求》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 16582-3:2015Domestic swimming poolsPart 3: Specific requirements includingsafety and test methods for abovegroundpoolsBS EN 16582-3:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16582-3:2015.The UK participation in its prepa

2、ration was entrusted to TechnicalCommittee SW/136/8, Swimming pools and aquatic equipment.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for

3、 its correctapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 82203 2ICS 97.220.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and

4、 Strategy Committee on 31 August 2015.Amendments issued since publicationDate Text affectedBS EN 16582-3:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16582-3 August 2015 ICS 97.220.10 English Version Domestic swimming pools - Part 3: Specific requirements including safety and test method

5、s for aboveground pools Piscines prives usage familial - Partie 3 : Exigences spcifiques et de scurit et mthodes dessai pour piscines hors sol Schwimmbder fr private Nutzung - Teil 3: Besondere Anforderungen einschlielich sicherheitstechnischer Anforderungen und Prfverfahren fr auf dem Boden aufgest

6、ellte Schwimmbder This European Standard was approved by CEN on 20 June 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibl

7、iographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respon

8、sibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Repu

9、blic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMA

10、LISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16582-3:2015 EBS EN 16582-3:2015EN 16582-3:2015 (E) 2 Contents Page Europ

11、ean foreword .3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Requirements and test methods specific to aboveground swimming pools 8 4.1 General 8 4.2 Aboveground swimming pool with frame-supporting walls .8 4.2.1 Resistance to horizontal deformation .8 4.2.2 Resistance to vertical

12、 deformation 9 4.2.3 Bursting strength 10 4.3 Aboveground swimming pool with self-stabilizing walls . 11 4.3.1 Capacity to stop an overflow . 11 4.3.2 Inflatable compartment 12 4.3.3 Stability in the event of deflation of the upper tube 12 4.3.4 Bursting strength 12 4.4 Mechanical strength of the me

13、mbrane of a swimming pool with tubular frame and/or flexible structure . 13 Bibliography . 14 BS EN 16582-3:2015EN 16582-3:2015 (E) 3 European foreword This document (EN 16582-3:2015) has been prepared by Technical Committee CEN/TC 402 “Domestic pools and spas”, the secretariat of which is held by A

14、FNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2016 and conflicting national standards shall be withdrawn at the latest by February 2016. Attention is drawn to the possibility that

15、 some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document is part of a series of standards dealing with domestic swimming pools which consist of: Part 1: General requiremen

16、ts including safety and test methods; Part 2: Specific requirements including safety and test methods for inground pools; Part 3: Specific requirements including safety and test methods for aboveground pools. This European Standard has to be read in conjunction with local and national regulations if

17、 they exist. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia

18、, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16582-3:2015EN 16582-3:2015 (E) 4 1 Scope This part of EN 16582 spec

19、ifies the specific safety and quality requirements and test methods for domestic aboveground swimming pools in addition to the general requirements of EN 16582-1 and shall be read in conjunction with it. The requirements of this standard take priority over those in EN 16582-1. These requirements and

20、 test methods are applicable to aboveground pool structures, including their means of access. This European Standard applies to pools with a minimum water depth of more than 400 mm. This European Standard does not apply to: pools of public use covered by EN 15288-1; paddling pools according to EN 71

21、-8; domestic or public use spas. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referen

22、ced document (including any amendments) applies. EN 1875-3, Rubber- or plastics- coated fabrics - Determination of tear strength - Part 3: Trapezoidal method EN 16582-1:2015, Domestic swimming pools - Part 1: General requirements including safety and test methods EN ISO 1421, Rubber- or plastics-coa

23、ted fabrics - Determination of tensile strength and elongation at break (ISO 1421) EN ISO 2411, Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411) EN ISO 4674-2, Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method (

24、ISO 4674-2) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 16582-1:2015 and the following apply. 3.1 frame all of the resistant parts that support and/or reinforce the wall in view of forming the peripheral structure Note 1 to entry: See Figure 1. 3.

25、2 pool wall generally upright structure serving to enclose or divide water or to protect an area BS EN 16582-3:2015EN 16582-3:2015 (E) 5 3.3 frame-supported wall wall whose stability is ensured solely by the constitutive elements supplied and which does not require additional reinforcement for its r

26、esistance to internal pressure (see Figure 1) Note 1 to entry: Foundation or ground-anchoring elements are not considered as reinforcements. a) Case 1 Key 1 frame 2 structure 3 waterproofing membrane (reinforced membrane) BS EN 16582-3:2015EN 16582-3:2015 (E) 6 b) Case 2 Key 1 polyester shell 2 stru

27、cture Figure 1 Example of frame-supported wall 3.4 self-stabilizing wall generally flexible wall whose stability is ensured by the presence of water in the pool Note 1 to entry: See Figure 2. Note 2 to entry: Swimming pools with self-stabilizing walls may be equipped with lateral devices that help m

28、aintain the products final shape. BS EN 16582-3:2015EN 16582-3:2015 (E) 7 a) Self-stabilizing swimming pool with inflatable tube b) Self-stabilizing swimming pool with tube partly filled with water BS EN 16582-3:2015EN 16582-3:2015 (E) 8 c) Self-stabilizing swimming pool with inflatable tube and str

29、ut Key 1 floating tube 2 watertight flexible structure (reinforced membrane) 3 self-stabilizing wall (2 + 4) 4 lateral device Figure 2 Examples of self-stabilizing wall 3.5 structure assembly of parts designed to support loads and provide a sufficient degree of rigidity (see Figure 1) SOURCE: EN 199

30、0:2002, 1.5.1.6, modified Note 1 to entry: The structure guarantees the stability and cohesion of a pool. 4 Requirements and test methods specific to aboveground swimming pools 4.1 General For new basin designs and for existing basin constructions that are structurally modified, the following tests

31、shall be carried out with at least one test sample. 4.2 Aboveground swimming pool with frame-supporting walls 4.2.1 Resistance to horizontal deformation 4.2.1.1 Requirements On completion of the test defined in 4.2.1.2, the swimming pool shall not collapse and shall meet the requirements set forth i

32、n EN 16582-1:2015, 4.5. 4.2.1.2 Test method Install the swimming pool. Fill it with water. Place a 400 mm long, 100 mm wide angle bracket on the top of the wall at the most unfavourable place. Exert a horizontal force of 400 N, 50 mm from the top of the angle bracket for 5 s (see Figure 3). The forc

33、e shall be applied at the appropriate position on the angle bracket to ensure that the force is exerted horizontally onto the top of the wall. BS EN 16582-3:2015EN 16582-3:2015 (E) 9 Dimensions in millimetres Figure 3 Resistance to horizontal deformation 4.2.2 Resistance to vertical deformation 4.2.

34、2.1 Requirements On completion of the test defined in 4.2.2.2, the entire product shall not suffer any permanent deformation affecting its structural integrity. 4.2.2.2 Test method Install the swimming pool. Fill it with water. If the width of the top wall is 50mm, apply a force of 1500 N vertically

35、 in the axis of the wall, for 5 min. The test shall be performed on a 300 mm diameter disc (see Figure 4 case 1). If the width of the top wall is 50 mm, apply a force of 500 N vertically in the axis of the wall, for 5 min. The test shall be performed on a 300 mm diameter disc (see Figure 4 case 2).

36、BS EN 16582-3:2015EN 16582-3:2015 (E) 10 Key (1) case 1 : width of the top wall 50mm (2) case 2 : the width of the top wall 50 mm Figure 4 Resistance to vertical deformation 4.2.3 Bursting strength 4.2.3.1 General The bursting strength test defined in 4.2.3.3 is performed after carrying out the resi

37、stance tests for horizontal deformation (4.2.1.2) and vertical deformation (4.2.2.2). 4.2.3.2 Requirements On completion of the test defined in 4.2.3.3, the pool shall not burst and shall not suffer any permanent deformation affecting the products structural integrity. 4.2.3.3 Test methods Fill the

38、swimming pool with water. Bring a plastic cylindrical barrel with a diameter between 400 mm and 500 mm, a capacity of 120 l and a total weight of 120 kg including ballast, in the vertical position, perpendicular to the wall. Tip it into the water. The drop height, compared to the water level recomme

39、nded by the manufacturer, is mm600400+(see Figure 5). Position the central axis of the barrel perpendicular to the inner edge (on the pool side) of the coping. Apply pressure on the upper edge of the barrel so as to tip the barrel into the swimming pool under its own inertia, at the most unfavourabl

40、e point. BS EN 16582-3:2015EN 16582-3:2015 (E) 11 Dimensions in millimetres Key 1 wall 2 coping 3 barrel support 4 barrel 5 central vertical axis of barrel 6 tip over 7 rotation point for tip over 8 water level Figure 5 Testing of bursting strength 4.3 Aboveground swimming pool with self-stabilizing

41、 walls 4.3.1 Capacity to stop an overflow 4.3.1.1 Requirement On completion of the tests described in 4.3.1.2 and 4.3.1.3, the swimming pool with self-stabilizing walls shall not collapse or empty suddenly. 4.3.1.2 Pool overflow Install the pool with self-stabilizing walls on flat horizontal ground

42、(maximum slope allowed is 5 mm/m); Fill the pool with self-stabilizing walls until it overflows with a flow rate of 2,5 m3/h minimum and allow it to overflow for 1 min. BS EN 16582-3:2015EN 16582-3:2015 (E) 12 4.3.1.3 Behaviour test of the wall under load Stop filling the swimming pool and restore t

43、he level to that recommended by the installation manual (if no other indications are given by the manufacturer, fill the swimming pool under the tube to the maximum permissible height); Place on the tube a 0,50 m long overflow channel with a minimum opening of 0,25 m (adapted to the tube size) balla

44、sted with two 40 kg weights on each side (one on the inside of the pool and the other on the outside); Maintain the load for 5 s at the tubes maximum deflection, making sure that the test weights do not come into contact with the base of the pool at any time during the test. The pool shall not colla

45、pse resulting in a total loss of water and shall not become unusable; Lift the load up immediately after 5 s making sure that the loading device does not interfere during this operation. NOTE In the case of swimming pools fitted with a strut, this test is performed at the most unfavourable point. 4.

46、3.2 Inflatable compartment The swimming pool with self-stabilizing walls generally comprises an air-inflatable upper tube. In this case, all of the air inlets provided for inflation shall be fitted with caps permanently secured on an accessible part of each inflatable compartment of the swimming poo

47、l with self-stabilizing walls. Once this part is inflated, the caps located inside the swimming pool with self-stabilizing walls shall be able to be pushed back inside the upper part so that they do not protrude from the surface by more than 5 mm. The caps of the inflation ports should not be able t

48、o become detached and should be protected against accidental removal. Check valves shall be fitted in order to prevent an instantaneous deflation. 4.3.3 Stability in the event of deflation of the upper tube 4.3.3.1 Requirement On completion of the test described in 4.3.3.2, the swimming pool with se

49、lf-stabilizing walls shall not collapse. 4.3.3.2 Test method Install the pool on flat horizontal ground (maximum slope allowed is 5 mm/m). Fill the pool with water up to the level normally recommended in the installation manual. Open the inflatable part by its normal air release device until it is apparently fully deflated. 4.3.4 Bursting strength 4.3.4.1 Requirement On completion of the test defined in 4.3.4.2, the swimming pool with self-stabilizing walls shall not burst and shall not present