BS EN 957-7-1999 Stationary training equipment - Rowing machines additional specific safety requirements and test methods《固定训练设备 划艇机械 附加的具体试验方法和安全性要求》.pdf

《BS EN 957-7-1999 Stationary training equipment - Rowing machines additional specific safety requirements and test methods《固定训练设备 划艇机械 附加的具体试验方法和安全性要求》.pdf》由会员分享，可在线阅读，更多相关《BS EN 957-7-1999 Stationary training equipment - Rowing machines additional specific safety requirements and test methods《固定训练设备 划艇机械 附加的具体试验方法和安全性要求》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 957-7:1999 The Euro

2、pean Standard EN 957-7:1998 has the status of a British Standard ICS 97.220.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Stationary training equipment Part 7: Rowing machines, additional specific safety requirements and test methodsBS EN 957-7:1999 This British Standard,

3、 having been prepared under the direction of the Consumer Products and Services Sector Committee was published under the authority of the Standards Committee and comes into effect on 15 January 1999 BSI 01-1999 ISBN 0 580 30088 9 Amendments issued since publication Amd. No. Date Text affected Nation

4、al foreword This British Standard is the English language version of EN 957-7:1998. The UK participation in its preparation was entrusted by Technical Committee SW/136, Sports, playground and other recreational equipment, to Subcommittee SW/136/4, Stationary training equipment,which has the responsi

5、bility to: aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizati

6、ons represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards

7、 Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard d

8、oes not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover.CEN European Committee for Standardization Comite Europe en de Normalisation Europa isches K

9、omitee fu r Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1998 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members Ref. No. EN 957-7:1998 E EUROPEAN STANDARD EN 957-7 NORME EUROPE ENNE EUROPA ISCHE NORM June 1998 ICS 97.220.30 De

10、scriptors: sport equipment, gymnastic equipment, fixed equipment, specifications, safety, characteristics, tests, technical notices English version Stationary training equipment Part 7: Rowing machines, additional specific safety requirements and test methods Appareils dentra nement fixes Partie 7:

11、Rameurs, prescriptions spe cifiques de se curite et me thodes dessai supple mentaires Stationa re Trainingsgera te Teil 7: Rudergera te, zusa tzliche besondere sicherheitstechnische Anforderungen und Pru fverfahren This European Standard was approved by CEN on 6 June 1998. CEN members are bound to c

12、omply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central

13、Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the

14、official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.Page 2 EN 957-7:1998 BSI 01-1999 Foreword

15、 This European Standard has been prepared by Technical Committee CEN/TC 136, Sports, playground and other recreational equipment, the Secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorse

16、ment, at the latest by December 1998, and conflicting national standards shall be withdrawn at the latest by December 1998. This standard, EN 957 Stationary training equipment, consists of the following parts: Part 1: General safety requirements and test methods Part 2: Strength training equipment,

17、additional specific safety requirements and test methods Part 4: Strength training benches, additional specific safety requirements and test methods Part 5: Pedal crank training equipment, additional specific safety requirements and test methods Part 6: Tread mills, additional specific safety requir

18、ements and test methods Part 7: Rowing machines, additional specific safety requirements and test methods Part 8: Steppers, stairclimbers and climbers, additional specific safety requirements and test methods According to the CEN/CENELEC Internal Regulations, the national standards organizations of

19、the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Contents Page Foreword 2 Introduc

20、tion 3 1 Scope 3 2 Normative references 3 3 Definitions 3 4 Classification 3 5 Safety requirements 5 6 Test methods 6 7 Additional instructions for use 8Page 3 EN 957-7:1998 BSI 01-1999 Introduction This part of EN 957 concerns the safety of rowing machines. It amends and supplements EN 957-1. The r

21、equirements of this specific standard take priority over those in the general standard. 1 Scope This part of EN 957 specifies safety requirements for rowing machines in addition to the general safety requirements of EN 957-1 and should be read in conjunction with it. This part of EN 957 is applicabl

22、e to stationary training equipment type rowing machines (type 7), hereinafter referred to as rowing machines, within classes S and H, and class A regarding accuracy. If accessories are provided with the rowing machine for the performance of additional exercises these are subject to the requirements

23、of EN 957-1 and any other specific requirements of the appropriate part of this standard. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the p

24、ublications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 71-1,

25、 Safety of toys Mechanical and physical properties. EN 547-3, Safety of machinery Human body measurements Part 3: Anthropometric data. EN 957-1:1996, Stationary training equipment Part 1: General safety requirements and test methods. 3 Definitions For the purposes of this standard, the definitions o

26、f EN 957-1 and the following apply: 3.1 rowing machine stationary training equipment with a moving seat simulating a motion like rowing (see Figures 1 to 3) 4 Classification EN 957-1:1996, clause 4, applies. . Figure 1 Example of a rowing machine with sculling systemPage 4 EN 957-7:1998 BSI 01-1999

27、1 hand grip 2 rower arm 3 tension adjustment 4 seat 5 rail 6 frame 7 foot strap 8 display 9 foot support 10 hydraulic/pneumatic piston 11 base support Figure 2 Example of a rowing machine with hydraulic/pneumatic systemPage 5 EN 957-7:1998 BSI 01-1999 1 seat Figure 4 Field of vision 1 handle 2 displ

28、ay 3 foot support 4 foot strap 5 seat 6 rail 7 heel bar 8 housing 9 base support 10 hand grip Figure 3 Example of a rowing machine with cable system 5 Safety requirements 5.1 General Depending on the design of the piece of equipment the following requirements shall apply as appropriate. 5.2 External

29、 construction 5.2.1 Squeeze, shear and reciprocating points within the accessible area The distance between movable parts and adjacent movable or rigid parts shall be at least 25 mm if relevant for fingers only, otherwise it shall be at least 60 mm. Required stops are excluded (if the user is not pu

30、t at risk). Accessible stops shall each have a minimum surface of 400 mm 2 . Stops which compress shall each produce a surface of 400 mm 2 when compressed with a pressure of 90 N/cm 2 . The 60 mm does not apply when the squeeze points remain within the users field of vision over the full range of mo

31、vement during use (see Figure 4). If the distance between movable parts and adjacent rigid parts does not change during the movement, the test fingers of 6.2 shall not become trapped.Page 6 EN 957-7:1998 BSI 01-1999 5.2.2 Transmission elements and rotating parts Transmission elements, fans and flywh

32、eels shall be protected so that, when tested in accordance with 6.2, the test finger cannot be trapped. 5.2.3 Temperature rise When tested in accordance with 6.4, accessible parts of the rowing machine shall not have a temperature greater than 658C. 5.2.4 Seats When tested in accordance with 6.3 and

33、 6.1.4, the seat shall not derail. 5.3 Intrinsic loading When tested in accordance with 6.5: with 250 kg for class H; and with 300 kg for class S; each piece of equipment shall withstand the test force without being deformed for more than f = 1/100 for a simply supported beam and f = 1/150 for a can

34、tilever beam (see Figure 5). After the test all parts of the equipment shall function according to the manufacturers instructions for use. The seat wheels or rollers should not have excessive play and shall rotate freely. 5.4 Handles In rowing machines where the handle is connected to the machine by

35、 a flexible member (rope belts or chains), the mass of the handle without a flexible member shall not exceed 600 g. Test in accordance with 6.1.5. 5.5 Foot supports and foot straps For classes S and H, provisions shall be made for fastening the foot (foot straps); for class S, the foot support or fo

36、ot strap shall be adjustable for different foot sizes. Test in accordance with 6.1.4. When tested in accordance with 6.6.1, each foot strap shall withstand: in class H: 500 N; in class S: 1 000 N; without breakage. When tested in accordance with 6.6.2, each foot support shall withstand a test load o

37、f 1 000 N without breakage. 5.6 Endurance test When tested in accordance with 6.7, the rowing machine shall withstand: 12 000 cycles for class H; and 100 000 cycles for class S. After the test the rowing machine shall be capable of functioning according to the manufacturers instructions for correct

38、use and shall not show any signs of damage, e.g. oil leakage. 5.7 Stability When tested according to 6.8, the base of the rowing machine shall not lift more than 10 mm. 5.8 Additional requirement for class A The variation of the indicated or determined power P from the power input shall not exceed 5

39、Wu pt o5 0W and 10 % over 50 W. Test in accordance with 6.9. 6 Test methods 6.1 General 6.1.1 Dimensional check 6.1.2 Visual examination 6.1.3 Tactile examination 6.1.4 Performance test 6.1.5 Weighing test 6.2 Testing of squeeze, shear and reciprocating points within the accessible area and transmis

40、sion elements and rotating parts Apparatus: test finger probe B in accordance with EN 71-1 for class H; and test finger in accordance with EN 957-1:1996, 6.5, for class S. Approach the test fingers from all sides to all moving parts. Determine whether the test finger is trapped. 6.3 Testing of seats

41、 Apply a test force of 100 N for 1 min to all directions of the seat. Check if the seat always remains attached to the rail. 6.4 Testing of temperature rise Apparatus: contact thermometer with an accuracy of 18C. Operate the rowing machine for 20 min at the following values: a) for speed-independent

42、 equipment: 25 complete strokes per min; 350 N measured at one or both handles combined; 60 % of the whole movement; b) for speed-dependent equipment: 350 N over 60 % of the movement at the appropriate stroke rate. The power of 350 N is the average power produced over one complete stroke.Page 7 EN 9

43、57-7:1998 BSI 01-1999 Dimensions in millimetres Figure 6 Test device for testing foot supports 6.5 Testing of intrinsic loading Place the rowing machine freely on a flat floor and clamp the seat in the middle position of the frame supports. Apply a test load F of 250 kg (class H); and 300 kg (class

44、S); to the seat for 5 min, see Figure 5. Remove the load and determine the reference dimensions f according to Figure 5. The feet of the equipment shall not be fixed to the floor during the test. 6.6 Testing of foot supports and foot straps 6.6.1 Apply the test force at the centre of the foot strap

45、at right angles to the foot supports for 1 min. 6.6.2 Apply the test force of 1 000 N to the foot support by using a test device in accordance with Figure 6 for 1 min. a) simply supported beam b) cantilever beam Figure 5 Permanent deformation testPage 8 EN 957-7:1998 BSI 01-1999 1 start of a stroke

46、2 return 3 start of next stroke Figure 7 Example of an input power graph 6.7 Endurance testing For speed-independent machines, carry out the test at 25 cycles/min at a force which produces 200 N at the handles and covers 75 % to 80 % of the full stroke range of a 95 percentile man in accordance with

47、 EN 547-3, with a moving load of 60 kg placed on the seat. For speed-dependent machines carry out the test at a speed which produces a force of 200 N at the handles. Perform the endurance test as follows: a) for class H: 12 000 cycles working for 15 min and rest time 15 min and continuing the same p

48、attern until the test is complete; b) for class S: 100 000 cycles working for 10 h, cool down to room temperature, then continue for a further 10 h and continue until the test is complete. Check after the test whether the rowing machine is capable of functioning according to the manufacturers instru

49、ctions for correct use, or if there are any signs of damage. 6.8 Testing of stability A test person weighing (100 5) kg, height (1 750 50) mm shall sit on the rowing machine in a normal exercise position and operate the rowing machine as mentioned in the manual: at 35 strokes/min at minimum resistance for speed-independent machines; and at 35 strokes/min for speed-dependent machines. Place the rowing machine on a 10 slope in the dynamic direction and on a 5 sl