BS EN 459-3-2015 Building lime Conformity evaluation《建筑石灰 合格评定》.pdf

《BS EN 459-3-2015 Building lime Conformity evaluation《建筑石灰 合格评定》.pdf》由会员分享，可在线阅读，更多相关《BS EN 459-3-2015 Building lime Conformity evaluation《建筑石灰 合格评定》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 459-3:2015Building limePart 3: Conformity evaluationBS EN 459-3:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 459-3:2015. Itsupersedes BS EN 459-3:2011 which is withdrawn.The UK participation in its preparation was entrusted

2、 to TechnicalCommittee B/516/11, Lime.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Insti

3、tution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 86477 3ICS 91.100.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2015.Amendments issued

4、 since publicationDate Text affectedBS EN 459-3:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 459-3 April 2015 ICS 91.100.10 Supersedes EN 459-3:2011English Version Building lime - Part 3: Conformity evaluation Chaux de construction - Partie 3 : valuation de la conformit Baukalk - Teil 3:

5、 Konformittsbewertung This European Standard was approved by CEN on 15 February 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists

6、and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under th

7、e responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugos

8、lav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN

9、DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 459-3:2015 EBS EN 459-3:2015EN 459-3:2015 (E) 2 Contents Page For

10、eword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Factory production control by the manufacturer .5 4.1 General requirements 5 4.1.1 Definition and concept 5 4.1.2 Works quality manual .5 4.1.3 Management system .5 4.1.4 System of documentation .6 4.2 Internal quality control 6

11、 4.2.1 Process control 6 4.2.2 Measuring and testing .7 4.2.3 Handling, storage, packaging and delivery 7 4.3 Autocontrol testing of samples 7 4.3.1 Sampling and testing 7 4.3.2 Evaluation of results of autocontrol testing of samples .7 4.3.3 Corrective action8 4.3.4 Measuring and test equipment for

12、 autocontrol testing .8 4.3.5 Quality records .8 4.4 Product type determination of the building lime 8 5 Surveillance, assessment and evaluation of the factory production control .9 5.1 Inspection of the factory production control 9 5.1.1 Inspection tasks .9 5.1.2 Initial inspection of the factory a

13、nd the factory production control 9 5.1.3 Inspection of an existing factory 9 5.1.4 Criteria for the assessment of the production equipment 9 5.1.5 Criteria for the assessment of laboratories . 10 5.1.6 Frequency of inspections 10 5.2 Reports 10 5.3 Certification of the factory production control 10

14、 6 Actions in the event of non-conformity 10 6.1 Actions to be taken by the manufacturer . 10 6.2 Actions to be taken in case of a non-conforming factory production control system . 10 7 Declaration of performance . 11 8 Requirements for dispatching centres . 11 8.1 General . 11 8.2 Tasks for the di

15、stributor 11 8.2.1 Quality control . 11 8.2.2 Confirmation autocontrol testing of samples taken at the dispatching centre . 11 Bibliography . 13 BS EN 459-3:2015EN 459-3:2015 (E) 3 Foreword This document (EN 459-3:2015) has been prepared by Technical Committee CEN/TC 51 “Cement and building limes”,

16、the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2015, and conflicting national standards shall be withdrawn at the latest by October 2015. Attentio

17、n is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 459-3:2011. This document has been prepared under a mandate given

18、to CEN by the European Commission and the European Free Trade Association. The European Standard EN 459 for Building lime consists of the following parts: Part 1: Definitions, specifications and conformity criteria; Part 2: Test methods; Part 3: Conformity evaluation. According to the CEN-CENELEC In

19、ternal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland,

20、 Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 459-3:2015EN 459-3:2015 (E) 4 1 Scope This European Standard specifies the scheme for the attestation and verifi

21、cation of constancy of performance (AVCP) of building limes to their corresponding product standard EN 459-1. It provides rules for surveillance, assessment and evaluation of the factory production control and rules for the frequency of inspections. The European Standard specifies technical rules fo

22、r factory production control by the manufacturer, including autocontrol testing of samples. It also provides rules for actions to be followed in the event of non-conformity and requirements for dispatching centres. 2 Normative references The following documents, in whole or in part, are normatively

23、referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 459-1:2015, Building lime Part 1: Definitions, specifications and

24、conformity criteria EN 459-2, Building lime Part 2: Test methods 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 factory facility used by a manufacturer for the production of building lime using equipment which is suitable for continuous mass

25、 production of building lime including, where relevant, equipment for adequate calcining, slaking, grinding and equipment for homogenization and the necessary capacity for the storage and dispatch of each type of building lime produced Note 1 to entry: This equipment and the production control appli

26、ed allow the control of production to ensure that the requirements of EN 459-1 are met. 3.2 factory production control permanent internal control of building lime production exercised by the manufacturer consisting of internal quality control and autocontrol testing 3.3 works quality manual document

27、(s) providing information on the factory production control applied by a manufacturer at a particular factory to ensure compliance of the building lime with the requirements of EN 459-1 3.4 depot building lime handling facility (not located at the factory) used for the dispatch of building lime (whe

28、ther in bulk or bagged) after transfer or storage where the manufacturer has full responsibility for all aspects of the quality of the building lime 3.5 dispatching centre building lime handling facility (not located at the factory) used for the dispatch of building lime (whether in bulk or bagged)

29、after transfer or storage where a distributor has full responsibility for all aspects of the quality of the building lime BS EN 459-3:2015EN 459-3:2015 (E) 5 3.6 distributor natural or legal person who takes from the manufacturer bulk building lime declared according to this European Standard and be

30、aring the conformity marking, who undertakes full responsibility for maintaining in a bulk handling facility all aspects of the quality of the building lime and who supplies the building lime onwards to a further person 3.7 confirmation autocontrol testing continual testing carried out by a distribu

31、tor which consists of the testing of samples taken by the distributor at the point(s) of release from the dispatching centre 4 Factory production control by the manufacturer 4.1 General requirements 4.1.1 Definition and concept Factory production control means the permanent internal control of build

32、ing lime production exercised by the manufacturer and consists of internal quality control and autocontrol testing of samples of building lime taken at the point of release (see 4.3). The details of the factory production control are described in the works quality manual (see 4.1.2). 4.1.2 Works qua

33、lity manual The manufacturers documentation and procedures for factory production control shall be described in a works quality manual, which shall adequately describe, among others: a) the quality aims, organization structure, responsibilities and powers of the management with regard to product qua

34、lity, the means to monitor the achievement of the required product quality and the effective operation of the factory production control (see 4.1.3); b) the manufacturing and quality control techniques, processes and systematic actions that will be used (see 4.2.1 and 4.2.3); c) the inspections and

35、tests that will be carried out before, during and after manufacture, and the frequency with which they will be carried out (see 4.2.2). The works quality manual prepared by the manufacturer for each factory shall include an adequate system of documentation (see 4.1.4). The works quality manual shall

36、 address and document the procedures operated to ensure that the manufactured building lime conforms to the technical specifications. It may be referred to associated documents which provide further details of the autocontrol testing of samples and the internal quality control. NOTE Manufacturers ha

37、ving an FPC system, which complies with EN ISO 9001 standard and which addresses the provisions of the present European standard are considered as satisfying the FPC requirements of the Regulation (EU) No 305/2011. 4.1.3 Management system 4.1.3.1 Quality policy The works quality manual shall include

38、 a statement by management defining its quality policy, objectives and commitments to the attainment of product quality. BS EN 459-3:2015EN 459-3:2015 (E) 6 4.1.3.2 Management representative The manufacturer shall appoint a management representative who, irrespective of other responsibilities, shall

39、 have defined authority and responsibility for ensuring that the requirements of this European Standard for the evaluation of conformity are implemented and maintained. 4.1.3.3 Internal audits and management review In order to ensure the continuing suitability and effectiveness of the works quality

40、manual to meet the requirements of this European Standard, the manufacturer shall perform at least once per year: a) internal audits covering the scope of this Clause 4 and 6.1; b) a management review of the factory production control, taking into account records of the internal audits. 4.1.3.4 Trai

41、ning The works quality manual shall describe the measures taken to ensure that all the personnel involved in operations that can affect internal quality control and product quality have appropriate experience or training. Appropriate records shall be retained. 4.1.4 System of documentation 4.1.4.1 D

42、ocument control The management representative shall be responsible for the control of all documents and data related to factory production control and to this scheme for the evaluation of conformity. This control shall ensure that the appropriate issues of all documents are available at essential lo

43、cations, that obsolete documents are withdrawn and that changes or modifications to any document are effectively introduced. The producer shall have a system to identify the current versions of documents in order to prevent the use of non-applicable documents. 4.1.4.2 Quality records The manufacture

44、r shall retain records of factory production control for at least the period required to comply with relevant legislation. 4.2 Internal quality control 4.2.1 Process control 4.2.1.1 General The works quality manual shall describe the parameters for process planning, process control and testing, insp

45、ection, corrective action, verification, dispatch and the associated records. 4.2.1.2 Composition of calcium lime, dolomitic lime, natural hydraulic lime and hydraulic lime The works quality manual shall describe the methods used by the manufacturer to ensure that the composition of the building lim

46、e produced conforms to EN 459-1 including appropriate test methods. BS EN 459-3:2015EN 459-3:2015 (E) 7 4.2.1.3 Constituents and composition of formulated lime The manufacturer shall establish documented procedures and select appropriate test methods to ensure that the constituents meet the requirem

47、ents of the relevant product specification standard and are suitable to enable formulated lime to be produced meeting the requirements of EN 459-1. The works quality manual shall describe the methods used by the manufacturer to ensure that the composition of the formulated lime produced conforms to

48、EN 459-1 including appropriate test methods. 4.2.1.4 Control of off-specification production The works quality manual shall contain procedures to ensure that off specification production is adequately managed. 4.2.2 Measuring and testing 4.2.2.1 Inspection, measuring and test equipment The equipment

49、 for in-process inspection and testing shall be regularly checked and calibrated in accordance with the procedures and frequencies laid down in the works quality manual. 4.2.2.2 Inspection and test status Procedures for the inspection and test status through the stages of manufacture shall be detailed in the works quality manual. These shall include procedures for the control of off specification intermediate materials. 4.2.3 Handling, storage, packaging and delivery The works quality documentation shall describe the precautions taken for the protectio