ANSI American Society of Safety Engineers A10.37-2016 American National Standard for Construction and Demolition Operations Debris Net Systems Used During Construction and Demoliti.pdf

《ANSI American Society of Safety Engineers A10.37-2016 American National Standard for Construction and Demolition Operations Debris Net Systems Used During Construction and Demoliti.pdf》由会员分享，可在线阅读，更多相关《ANSI American Society of Safety Engineers A10.37-2016 American National Standard for Construction and Demolition Operations Debris Net Systems Used During Construction and Demoliti.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、AmericAn nAtionAl StAndArdANSI/ASSE A10.37 2016Debris Net Systems Used During Construction and Demolition OperationsAmerican National Standard for Construction and Demolition OperationsAmericAn Society of SAfety engineerS4Casselogo-1200dpi_vector-1c-outline.pdf 1 1/20/2012 1:31:55 PMANSI/ASSE A10.37

2、 2016ANSI/ASSE A10.37 2016The information and materials contained in this publication have been developed from sources believed to be reliable. However, the American Society of Safety Engineers (ASSE) as secretariat of the ANSI accredited A10 Committee or individual committee members accept no legal

3、 responsibility for the correctness or completeness of this material or its application to specific factual situations. By publication of this standard, ASSE or the A10 Committee does not ensure that adherence to these recommendations will protect the safety or health of any persons, or preserve pro

4、perty. ANSI ANSI/ASSE A10.37 2016 American National Standard Construction and Demolition Operations Debris Net Systems Used During Construction and Demolition Operations Secretariat American Society of Safety Engineers 520 N. Northwest Highway Park Ridge, Illinois 60068 Approved September 26, 2016 A

5、merican National Standards Institute, Inc. Approval of an American National Standard requires verification by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Bo

6、ard of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be m

7、ade toward their resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether he/she has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conformin

8、g to the standards. The American National Standards Institute does not develop standards and will in no circumstance give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name

9、 of the American National Standards Institute. Requests for interpretation should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. Caution Notice: This American National Standard may be revised or withdrawn at any time. The procedures of the American

10、National Standards Institute requires that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Published November 2016

11、by American Society of Safety Engineers 520 N. Northwest Highway Park Ridge, Illinois 60068 (847) 699-2929 www.asse.org Copyright 2016 by American Society of Safety Engineers All Rights Reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwis

12、e, without the prior written permission of the publisher. Printed in the United States of America American National Standard Foreword (This Foreword is not a part of American National Standard A10.37-2016.) This standard is one of a series of safety standards that have been formulated by the Accredi

13、ted Standards Committee on Safety in Construction and Demolition Operations, A10. It is expected that the standards in the A10 series will find a major application in industry, serving as a guide to contractors, labor, and equipment manufacturers. For the convenience of users, a list of existing and

14、 proposed standards in the A10 series for Safety Requirements in Construction and Demolition Operations follows. A10.1 Pre-Project & Pre-Task Safety & Health Planning A10.2 Safety, Health and Environmental Training (under development) A10.3 Powder-Actuated Fastening Systems A10.4 Personnel Hoists an

15、d Employee Elevators A10.5 Material Hoists A10.6 Demolition Operations A10.7 Transportation, Storage, Handling and Use of Commercial Explosives and Blasting Agents A10.8 Scaffolding A10.9 Concrete and Masonry Construction A10.10 Temporary and Portable Space Heating Devices A10.11 Personnel Nets A10.

16、12 Excavation A10.13 Steel Erection A10.15 Dredging A10.16 Tunnels, Shafts and Caissons A10.17 Safe Operating Practices for Hot Mix Asphalt (HMA) Construction A10.18 Temporary Roof and Floor Holes, Wall Openings, Stairways and Other Unprotected Edges A10.19 Pile Installation and Extraction Operation

17、s A10.20 Ceramic Tile, Terrazzo, and Marble Work A10.21 Safe Construction and Demolition of Wind Generation/Turbine Facilities (under development) A10.22 Rope-Guided and Non-Guided Workers Hoists A10.23 Safety Requirements for the Installation of Drilled Shafts A10.24 Roofing Safety Requirements for

18、 Low-Sloped Roofs A10.25 Sanitation in Construction A10.26 Emergency Procedures for Construction Sites A10.27 Hot Mix Asphalt Facilities A10.28 Work Platforms Suspended from Cranes or Derricks A10.29 Aerial Platforms in Construction (under development) A10.31 Digger-Derricks A10.32 Personal Fall Pro

19、tection Used in Construction and Demolition Operations A10.33 Safety and Health Program Requirements for Multi-Employer Projects A10.34 Public Protection A10.37 Debris Nets A10.38 Basic Elements of a Program to Provide a Safe and Healthful Work Environment A10.39 Construction Safety and Health Audit

20、 Program A10.40 Reduction of Musculoskeletal Problems in Construction A10.42 Rigging Qualifications and Responsibilities in the Construction Industry A10.43 Confined Spaces in Construction and Demolition Operations A10.44 Lockout/Tagout in Construction A10.46 Hearing Loss Prevention A10.47 Highway C

21、onstruction Safety A10.48 Communication Structures A10.49 Control of Health Hazards One purpose of these standards is to serve as guides to governmental authorities having jurisdiction over subjects within the scope of the A10 Committee standards. If these standards are adopted for governmental use,

22、 the reference of other national codes or standards in individual volumes may be changed to refer to the corresponding regulations. Revisions: The A10 Committee welcomes proposals for revisions to this standard. Revisions are made to the standard periodically (usually five years from the date of the

23、 standard) to incorporate changes that appear necessary or desirable, as demonstrated by experience gained from the application of the standard. Proposals should be as specific as possible, citing the relevant section number(s), the proposed wording and the reason for the proposal. Pertinent documen

24、tation would enable the A10 Committee to process the changes in a more-timely manner. Interpretations: Upon a request in writing to the Secretariat, the A10 Committee will render an interpretation of any requirement of the standard. The request for interpretation should be clear, citing the relevant

25、 section number(s) and phrased as a request for a clarification of a specific requirement. Oral interpretations are not provided. No one but the A10 Committee (through the A10 Secretariat) is authorized to provide any interpretation of this standard. Approval: Neither the A10 Committee nor American

26、National Standards Institute (ANSI) approves, certifies, rates or endorses any item, construction, proprietary device or activity. Appendices: Appendices are included in most standards to provide the user with additional information related to the subject of the standard. Appendices are not part of

27、the approved standard. Checklists: Checklists included in A10 standards may be copied and used in non-commercial settings only. Committee Meetings: The A10 Committee meets twice per year. Persons wishing to attend a meeting should contact the Secretariat for information. Standard Approval: This stan

28、dard was processed and approved for submittal to ANSI by the American National Standards Committee on Safety in Construction and Demolition Operations, A10. Approval of the standard does not necessarily imply (nor is it required) that all Committee members voted for its approval. At the time ANSI ap

29、proved this standard, the A10 Committee had the following members: Richard King, CSP, Chair Steven Rank, Vice Chair Timothy R. Fisher, CSP, CHMM, ARM, CPEA, Secretary Ovidiu Munteanu, Assistant Secretary Jennie Dalesandro, Administrative Technical Support Organization Represented Name of Representat

30、ive 3M Corporation Raymond A. Mann Judd Perner Accident Prevention Corporation Frank Burg, CSP, P.E. Terry Krug, CSP, CIH American Insurance Services Group Thad Nosal James G. Borchardt, CSP, CPE, CRIS ASCE - Construction Institute Committee William R. Nash, P.E. Harlan Fair, P.E. American Society o

31、f Safety Engineers Ken Shorter, CSP, ARM, TCDS A. David Brayton, CSP, CPC American Wind Energy Association Christopher Daniels Michele Myers Mihelic American Work Platform Training, Inc. Dennis W. Eckstine Associated Builders and Contractors, Inc. Ralph Riley Lauren Williams Associated General Contr

32、actors of America, The Michael McCaffrey Kevin Cannon A-Z Safety Resources, Inc. Jane F. Williams, CPEA, CCA Barton-Malow Company Jeffrey Oliver Mark Haggenmaker Black & Veatch Richard F. King, CSP John H. Johnson, CSP Building & Construction Trades Department Pete Stafford Chris Trahan, CIH CPWR -

33、Center for Construction Research & Training Bruce Lippy, Ph.D., CIH, CSP Clark Construction Group Kurt Dunmire, CSP, CHST Cole-Preferred Safety Consulting, Inc. Barry Cole Construction & Realty Safety Group, Inc. Ron Lattanzio Frank Marino Edison Electric Institute R. Lee Reed, Jr. Elevator Industry

34、 Work Preservation Fund Michael D. Morand James Demmel Ellis Fall Safety Solutions J. Nigel Ellis, Ph.D., P.E., CSP, CPE John T. Whitty, P.E. Engineering Systems, Inc. David Ahearn, P.E. Edward J. Tuczak, P.E. Fluor Corporation Michael Weatherred, CSP James Bates, CSP Gilbane Building Co. Anthony OD

35、ea, CSP, CHST Charles Praul, Jr., CSP Richard D. Hislop Richard Hislop Shawn Bradfield Independent Electrical Contractors, Inc. John P. Masarick Jerry Rivera Innovative Safety, LLC Daniel M. Paine Barbara Paine Institute of Makers of Explosives Susan JP Flanagan Ronald Thomas Insulators Internationa

36、l Union Terry Lynch Jim E. Lapping, MS, P.E., CSP International Association of Bridge, Structural, Ornamental and Reinforcing Iron Workers Steven Rank International Brotherhood of Boilermakers Mark Garrett Bridget Connors International Brotherhood of Electrical Workers David Mullen International Bro

37、therhood of Teamsters LaMont Byrd, CIH Asher Tobin International Safety Equipment Association Cristine Fargo International Union of Bricklayers & Allied Craftworkers Michael Kassman, CHST Gerard Scarano International Union of Operating Engineers Barbara McCabe Jack L. Mickle & Associates Jack Mickle

38、, Ph.D., P.E. Steve Stock, P.E., PLS Kiewit power Constructors Co. Rusty Brown, CSP Jason Scollin, CSP Laborers International Union of North America Scott Schneider, MS, CIH Walter A. Jones, MS, CIH Lamar Advertising Chuck Wigger, CSP Micky Vint Lend Lease Joel Pickering, CET, CHMM Michael Lentz Lib

39、erty Mutual Insurance Daniel P. Lavoie, CSP, ARM Stan Williams, ARM, CHST Marsh USA, Inc. Timothy Bergeron, CSP Maryland Occupational Safety & Health Mischelle Vanreusel Michael Daughaday Mechanical Contractors Association of America Peter Chaney, MS, CSP Dennis Langley National Association of Home

40、Builders Robert Matuga Chelsea Vetick National Association of Railroad Safety Consultants & Investigators Lewis Barbe, P.E., CSP, CRSP National Electrical Contractors Association Michael J. Johnston Wesley Wheeler National Institute for Occupational Safety & Health Thomas G. Bobick, Ph.D., P.E., CSP

41、, CPE G. Scott Earnest, Ph.D., P.E, CSP National Railroad Contractors & Maintenance Association Jeffrey D. Meddin, CSP, CHEP, CHCM National Roofing Contractors Association Harry Dietz Tom Shanahan National Society of Professional Engineers E. Ross Curtis, P.E., DFE Paul Swanson, P.E. NESTI, Inc. Mic

42、hael Hayslip Operative Plasterers and Cement Masons International Association Deven Johnson Phoenix Fabricators and Erectors, Inc. Luke Humphrey Frank Massey Powder Actuated Tool Manufacturers Institute James A. Borchers Craig Pratt Power Consultants, Incorporated David Goldsmith Camille Villanova P

43、rofessional Safety Consultants, Inc. Jim E. Lapping, MS, P.E., CSP Anthony Brown Safety Environmental Engineering, Inc. Matthew Murphy Scaffolding, Shoring & Forming Institute Granville Loar Shafer Safety Solutions, LLC Carmen Shafer, CSP, CHST, CRIS Sheet Metal & Air Conditioning Contractors Nation

44、al Association Mike McCullion, CSP, ARM Sheet Metal Workers International Association Randall Krocka Charles Austin, MS SPA, Incorporated Stanley Pulz, CSP, P.E. TAUC Wayne Creasap, II Kathleen Dobson, CSP, CHST, STS-C Turner Construction Company Cindy L. DePrater, ALCM Abdon Friend, CSP United Asso

45、ciation of Plumbers and Pipefitters Rich Benkowski United Brotherhood of Carpenters and William Irwin Joiners of America Dale Shoemaker United Union of Roofers, Waterproofers and Allied Workers Keith J. Vitkovich U.S. Department of the Army Corps of Engineers Brian Becker, MS Andrew Blaisdell, MS, E

46、I U.S. Department of Energy Bill R. McArthur, Ph.D., CIH Terry Meisinger West Virginia University Extension Service Brandon Takacs, CSHM Mark Fullen, Ed.D., CSP ZBD Constructors (Zurn Industries) Greg Thompson, CSP Jeffrey D. Meddin, CSP, CHEP, CHCM Independent Experts & Observers: Warfel Constructi

47、on Company Jeffrey I. Pierce Kevin Stoltzfus Subgroup A10.37 had the following members: Edward Tuczak, P.E. (Chair) Daniel Paine (Liaison) Kelly Baird J. Nigel Ellis, Ph.D., P.E., CSP, CPE Lawrence Greenburg Paul Huntley Chip Merritt John Neal Dan Nunn Steven Rank Jeremy Stanek Joseph Yeatman Conten

48、ts SECTION PAGE 1. General . 10 1.1 Scope . 10 1.2 Purpose 10 1.3 Exceptions 10 2. Definitions . 10 3. Installation Considerations 10 4. Materials . 11 5. Debris Net Selection 11 6. Design of Nets . 12 7. Identification of Nets 12 8. Manufacturers Qualification Test 12 9. On-the-Job Test 13 10. Inst

49、allation . 14 11. Inspection 14 12. Care, Maintenance and Storage 14 13. Factors Affecting Net Life 15 13.1 Sunlight 15 13.2 Abrasion and Flexion 15 13.3 Rust 15 13.4 Airborne Contaminants . 15 14. Related Standards. 15 Figure 1 Debris Net 13 AMERICAN NATIONAL STANDARD A10.37 2016 10 AMERICAN NATIONAL STANDARD A10.37 DEBRIS NET SYSTEMS USED DURING CONSTRUCTION AND DEMOLITION OPERATIONS 1. GENERAL 1.1 Scope. This standard establishes safety requirements for the design, selection, installation and use of debris net systems during construction, demolition operations