ANSI AD500-2-2016 Agricultural tractors - Rear-mounted power take-off types 1 2 3 and 4 - Part 2 Narrow-track tractors dimensions for master shield and clearance zone.pdf

《ANSI AD500-2-2016 Agricultural tractors - Rear-mounted power take-off types 1 2 3 and 4 - Part 2 Narrow-track tractors dimensions for master shield and clearance zone.pdf》由会员分享，可在线阅读，更多相关《ANSI AD500-2-2016 Agricultural tractors - Rear-mounted power take-off types 1 2 3 and 4 - Part 2 Narrow-track tractors dimensions for master shield and clearance zone.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、 ANSI/ASABE AD500-2:2004 OCT2016 Agricultural tractors Rear-mounted power take-off types 1, 2, 3 and 4 Part 2: Narrow-track tractors, dimensions for master shield and clearance zone American Society of Agricultural and Biological Engineers ASABE is a professional and technical organization, of membe

2、rs worldwide, who are dedicated to advancement of engineering applicable to agricultural, food, and biological systems. ASABE Standards are consensus documents developed and adopted by the American Society of Agricultural and Biological Engineers to meet standardization needs within the scope of the

3、 Society; principally agricultural field equipment, farmstead equipment, structures, soil and water resource management, turf and landscape equipment, forest engineering, food and process engineering, electric power applications, plant and animal environment, and waste management. NOTE: ASABE Standa

4、rds, Engineering Practices, and Data are informational and advisory only. Their use by anyone engaged in industry or trade is entirely voluntary. The ASABE assumes no responsibility for results attributable to the application of ASABE Standards, Engineering Practices, and Data. Conformity does not e

5、nsure compliance with applicable ordinances, laws and regulations. Prospective users are responsible for protecting themselves against liability for infringement of patents. ASABE Standards, Engineering Practices, and Data initially approved prior to the society name change in July of 2005 are desig

6、nated as “ASAE“, regardless of the revision approval date. Newly developed Standards, Engineering Practices and Data approved after July of 2005 are designated as “ASABE“. Standards designated as “ANSI“ are American National Standards as are all ISO adoptions published by ASABE. Adoption as an Ameri

7、can National Standard requires verification by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by ASABE. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and m

8、aterially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. CAUTION NOTICE: ASABE and ANSI standards may be revi

9、sed or withdrawn at any time. Additionally, procedures of ASABE require that action be taken periodically to reaffirm, revise, or withdraw each standard. Copyright American Society of Agricultural and Biological Engineers. All rights reserved. ASABE, 2950 Niles Road, St. Joseph, Ml 49085-9659, USA,

10、phone 269-429-0300, fax 269-429-3852, hqasabe.org ANSI/ASABE AD500-2:2004 OCT2016 Copyright American Society of Agricultural and Biological Engineers 1 ANSI/ASABE AD500-2: 2004 OCT2016 Revision approved October 2016 as an American National Standard Agricultural tractors Rear-mounted power take-off t

11、ypes 1, 2, 3 and 4 Part 2: Narrow-track tractors, dimensions for master shield and clearance zone These materials are subject to copyright claims of ISO and ASABE. No part of this publication may be reproduced in any form, including an electronic retrieval system, without the prior written permissio

12、n of ASABE. All requests pertaining to ANSI/ASABE AD500-2:2004 OCT2016 standard should be submitted to ASABE. This standard was reviewed and approved for adoption by the ASABE Power and Machinery Tractors and Tractor Implement Interface/PTO Technical subcommittees, and has been formally approved. Th

13、is adoption, along with the adoption with deviations of ISO 500-1:2004/Cor. 1:2005, ISO 8759-1:1998, and ISO 8759-2:1998 and the identical adoption of ISO 500-3:2004 replaced ASAE S203.14 and ASAE S513. Rear mounted PTOs are addressed in the ISO 500 adoptions, front mounted in the ISO 8759 adoptions

14、. Adopted by ASABE December 2010; approved as an American National Standard January 2011; revised as an adoption with deviations October 2016. Keywords: Clearance zone, Dimensions, Master shield, Narrow track tractors, Power take-off, Safety 0 Foreword 0.1 ANSI/ASABE AD500-2:2004, Agricultural tract

15、ors Rear-mounted power take-off types 1, 2, 3 and 4 Part 2: Narrow-track, tractors, dimensions for master shield and clearance zone, is an adoption with deviations of the similarly titled ISO standard ISO 500-2:2004, Agricultural tractors Rear-mounted power take-off types 1, 2 and 3 Part 2: Narrow-t

16、rack, tractors, dimensions for master shield and clearance zone Deviations from the subsequently printed international standard are noted with underscore (addition) or strikethrough (deletions) text. Deviations from the international standard figures and equations are clearly marked. 0.2 ANSI/ASABE

17、AD500-2:2004 specifies the dimensions of the master shield and clearance zones for rear-mounted power take-offs (PTO) of types 1 and 2 on narrow-track (track width 1 150 mm or less) agricultural tractors. Designers should consider Parts 1, 2 and 3 to ensure their designs are covered fully. 0.3 Eight

18、 normative references are listed in ISO 500-2:2004. The responsible ASABE committee has reviewed these references and approved the following deviation(s): 0.3.1 Replace ISO 500-1:2004, Agricultural tractors Rear-mounted power take-off types 1, 2 and 3 Part 1: General specifications, safety requireme

19、nts, dimensions for master shield and clearance zone, with ANSI/ASABE AD500-1:2014 FEB2015, Agricultural tractors Rear-mounted power take-off types 1, 2, 3 and 4 Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone. Any reference to ISO 500-1:2004 in t

20、he printed portion of ISO 500-2:2004 shall be replaced by ANSI/ASABE AD500-1:2014 FEB2015. 0.3.2 Replace ISO 5673-2, Agricultural tractors and machinery Power take-off drive shafts and power-input connection Part 2: Specification for use of PTO drive shafts, and position and clearance of PTO drive l

21、ine and ANSI/ASABE AD500-2:2004 OCT2016 Copyright American Society of Agricultural and Biological Engineers 2 PIC for different attachments, with ANSI/ASABE AD5673-2:2005 SEP2014, Agricultural tractors and machinery Power take-off drive shafts and power-input connection Part 2: Specification for use

22、 of PTO drive shafts, and position and clearance of PTO drive line and PIC for various attachments. Any reference to ISO 5673-2 in the printed portion of ISO 500-2:2004 shall be replaced by ANSI/ASABE AD5673-2:2005 SEP2014. 0.3.3 Replace ISO 6489-3, Agricultural vehicles Mechanical connections betwe

23、en towed and towing vehicles Part 3: Tractor drawbar, with ANSI/ASABE AD6489-3:2004 JUL2014, Agricultural vehicles Mechanical connections between towed and towing vehicles Part 3: Tractor drawbar. Any reference to ISO 6489-3 in the printed portion of ISO 500-2:2004 shall be replaced by ANSI/ASABE AD

24、6489-3:2004 JUL2014. 0.3.4 Add ISO 6489-5, Agricultural vehicles Mechanical connections between towed and towing vehicles Part 5: Specifications for non-swivel clevis couplings. 0.3.5 Replace ISO 24347, Agricultural vehicles Mechanical connections between towed and towing vehicles Dimensions of ball

25、-type coupling device (80 mm), with ANSI/ASABE AD24347:2005 JUN2014, Agricultural vehicles Mechanical connections between towed and towing vehicles Dimensions of ball-type coupling device (80 mm). Any reference to ISO 24347 in the printed portion of ISO 500-2:2004 shall be replaced by ANSI/ASABE AD2

26、4347:2005 JUN2014. 0.4 This standard has been approved as an American National Standard by ANSI (American National Standards Institute). The original content of ISO 500 and ISO 8759 was based on ASAE S203. 0.5 This standard deviates from ISO 500-2:2004 as follows: 0.5.1 See Section 0.3 for Normative

27、 reference deviations. 0.5.2 Change title of standard to include type 4 PTOs: Agricultural tractors Rear-mounted power take-off types 1, 2, 3 and 4 Part 2: Narrow-track tractors, dimensions for master shield and clearance zone 0.5.3 In 1.1, Scope, replace This part of ISO 500 with ASABE/ISO 500-2:20

28、04. Text of ISO 5002:2004 Agricultural tractors Rear mounted power take-off types 1, 2, and 3 - Part 2: Narrow-track tractors, dimensions for master shield and clearance zone, with deviations noted, follows. 1 Scope 1.1 This part of ISO 500 ANSI/ASABE/ISO AD500-2:2004 specifies the dimensions of the

29、 master shield and clearance zones for rear-mounted power take-offs (PTO) of types 1 and 2 on narrow-track (track width 1 150 mm or less) agricultural tractors. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, onl

30、y the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 500-1:2004, Agricultural tractors Rear-mounted power take-off types 1, 2 and 3 Part 1: General specifications, safety requirements, dimensions for master shield

31、and clearance zone ANSI/ASABE AD500-1:2014 FEB2015, Agricultural tractors Rear-mounted power take-off types 1, 2, 3 and 4 Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone ISO 789-1:1990, Agricultural tractors Test procedures Part 1: Power tests for

32、 power take-off ANSI/ASABE AD500-2:2004 OCT2016 Copyright American Society of Agricultural and Biological Engineers 3 ISO 5673-2, Agricultural tractors and machinery Power take-off drive shafts and power-input connection Part 2: Specification for use of PTO drive shafts, and position and clearance o

33、f PTO drive line and PIC for different attachments1ANSI/ASABE AD5673-2:2005 SEP2014, Agricultural tractors and machinery Power take-off drive shafts and power-input connection Part 2: Specification for use of PTO drive shafts, and position and clearance of PTO drive line and PIC for various attachme

34、nts ISO 6489-1, Agricultural vehicles Mechanical connections between towed and towing vehicles Part 1: Dimensions of hitch-hooks ISO 6489-2, Agricultural vehicles Mechanical connections between towed and towing vehicles Part 2: Specifications for clevis coupling 40 ISO 6489-3, Agricultural vehicles

35、Mechanical connections between towed and towing vehicles Part 3: Tractor drawbar ANSI/ASABE AD6489-3:2004 JUL2014, Agricultural vehicles Mechanical connections between towed and towing vehicles Part 3: Tractor drawbar ISO 6489-4, Agricultural vehicles Mechanical connections between towed and towing

36、vehicles Part 4: Dimensions of piton-type coupling ISO 6489-5, Agricultural vehicles Mechanical connections between towed and towing vehicles Part 5: Specifications for non-swivel clevis couplings ISO 24347, Agricultural vehicles Mechanical connections between towed and towing vehicles Dimensions of

37、 ball-type coupling device (80 mm)2ANSI/ASABE AD24347:2005 JUN2014, Agricultural vehicles Mechanical connections between towed and towing vehicles Dimensions of ball-type coupling device (80 mm) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1

38、 power take-off shaft PTO external shaft on the rear of the tractor to provide rotational power to implements ISO 500-1:2004 ANSI/ASABE AD500-1:2014 FEB2015, definition 3.1 3.2 type A tractor agricultural tractor with a fixed or adjustable minimum track width on at least one axle of 950 mm or less a

39、nd tractor PTO power of less than 20 kW as determined in accordance with ISO 789-1 3.3 type B tractor 1To be published. (Revision of ISO 5673:1993) 2To be published. ANSI/ASABE AD500-2:2004 OCT2016 Copyright American Society of Agricultural and Biological Engineers 4 agricultural tractor with a fixe

40、d or adjustable minimum track width on at least one axle of more than 950 mm but not more than 1 150 mm 4 Specifications 4.1 The tractor rear PTO shall be of type 1 or type 2, according to ISO 500-1:2004 ANSI/ASABE AD500-1:2014 FEB2015. 4.2 The direction of PTO rotation shall be clockwise when viewe

41、d from behind the tractor. 4.3 The nominal PTO rated rotational frequency may be realized by one or more engine speed ranges. 5 General requirements Safety and PTO speed requirements shall be according to ISO 500-1:2004 ANSI/ASABE AD500-1:2014 FEB2015. 6 Dimensions for tractor master shield aperture

42、 and clearance zone of PTO The tractor master shield aperture and the clearance zone around the PTO shall be in accordance with Figure 1 and Table 1. ANSI/ASABE AD500-2:2004 OCT2016 Copyright American Society of Agricultural and Biological Engineers 5 a The clearance may be restricted by movable and

43、/or detachable devices. The clearance zone on towing vehicles shall be in accordance with ISO 6489 (ISO 6489-1, ISO 6489-2, ANSI/ASABE AD6489-3:2004 JUL2014, ISO 6489-4 and ISO 6489-5), ISO 5673-2 ANSI/ASABE AD5673-2:2005 SEP2014 and ISO 24347 ANSI/ASABE AD24347:2005 JUN2014. b Angle optional under

44、consideration of clearance zone. c Shape optional. Figure 1 Tractor master shield aperture and clearance zone around PTO ANSI/ASABE AD500-2:2004 OCT2016 Copyright American Society of Agricultural and Biological Engineers 6 Table 1 Tractor master shield controlling dimensions for the aperture and dim

45、ensions for clearance zone Dimension (see Figure 1) PTO types 1 and 2 Tractor type A Tractor type B a min. 76 mm 76 mm min. 60 60 min. 50 50 min. 45 45SRr max. 76 mm 76 mm k min. 70 mm 70 mm 205+m110 mm 110 mm 520+n80 mm 80 mm p 180 mm + 120 mma 220 mm + 80 mma r max. 76 mm 76 mm a If 250 mm, the master shield should be partly or completely movable to facilitate coupling and uncoupling the PTO drive shaft (see ISO 500-1:2004 ANSI/ASABE AD500-1:2014 FEB2015, 6.2).