BS ISO IEC 24723-2010 Information technology Automatic identification and data capture techniques GS1 composite bar code symbology specification《信息技术 自动标识和数据收集技术 GS1复合条形码符.pdf

《BS ISO IEC 24723-2010 Information technology Automatic identification and data capture techniques GS1 composite bar code symbology specification《信息技术 自动标识和数据收集技术 GS1复合条形码符.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 24723-2010 Information technology Automatic identification and data capture techniques GS1 composite bar code symbology specification《信息技术 自动标识和数据收集技术 GS1复合条形码符.pdf（56页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwide NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSI Standards Publication BS ISO/IEC 24723:2010 Information technology Automatic identification and data capture techniques GS1 composite bar code symbology specificationBS ISO/IEC 24723:2010 BRITISH S

2、TANDARD National foreword This British Standard is the UK implementation of ISO/IEC 24723:2010. It supersedes BS ISO/IEC 24723:2006 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee IST/34, Automatic identification and data capture techniques. A list of

3、 organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2010 ISBN 978 0 580 71971 4 ICS 01.080.50; 35.040 Compliance with

4、a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2010. Amendments issued since publication Date Text affectedBS ISO/IEC 24723:2010Reference number ISO/IEC 24723:201

5、0(E) ISO/IEC 2010INTERNATIONAL STANDARD ISO/IEC 24723 Second edition 2010-08-01 Information technology Automatic identification and data capture techniques GS1 Composite bar code symbology specification Technologies de linformation Techniques automatiques didentification et de capture des donnes Spc

6、ifications de la symbologie des codes barres du Composant GS1 BS ISO/IEC 24723:2010 ISO/IEC 24723:2010(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are

7、 embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorpor

8、ated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a

9、 problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2010 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanic

10、al, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.or

11、g Published in Switzerland ii ISO/IEC 2010 All rights reservedBS ISO/IEC 24723:2010 ISO/IEC 24723:2010(E) ISO/IEC 2010 All rights reserved iiiContents Page Foreword .v Introductionvi 1 Scope1 2 Normative references1 3 Terms, definitions, abbreviated terms and mathematical operators .2 3.1 Terms and

12、definitions .2 3.2 Abbreviated terms .3 3.3 Mathematical operators and notational conventions 3 4 Symbol description .3 4.1 Basic characteristics.3 4.2 Summary of additional features.4 4.3 Symbol structure .4 4.4 Supported component combinations6 5 Source data encodation into a binary string 6 5.1 G

13、eneral .6 5.2 Encodation Method field.7 5.3 Compressed data field7 5.4 General-purpose data compaction field11 6 Error correction .15 7 Linear component requirements .15 7.1 General .15 7.2 EAN/UPC linear components .15 7.3 GS1 DataBar family linear components16 7.4 GS1-128 components18 8 CC-A compo

14、nent requirements .19 8.1 CC-A General.19 8.2 Overview of the CC-A component .19 8.3 CC-A component structure.20 8.4 Symbol character structure22 8.5 Base 928 compaction mode .24 8.6 Reference decode algorithm 25 9 CC-B component requirements .26 10 CC-C component requirements .27 11 Symbol dimensio

15、ns.28 11.1 Minimum width of a module (X) .28 11.2 Linear component height28 11.3 2D component row height (Y).28 11.4 Separator pattern and vertical separator bars .28 11.5 Quiet zones 29 12 Graphical requirements 29 12.1 General .29 12.2 Vertical alignment requirements29 12.3 Horizontal alignment re

16、quirements .29 12.4 Human readable interpretation 30 13 Symbol quality .30 BS ISO/IEC 24723:2010 ISO/IEC 24723:2010(E) iv ISO/IEC 2010 All rights reserved13.1 Linear component30 13.2 2D component30 13.3 Overall composite symbol grade .30 13.4 Additional pass/fail criteria.30 14 Transmitted data30 14

17、.1 General data transmission techniques .30 14.2 GS1-128 Composite symbols .31 14.3 GS1 DataBar Composite symbols31 14.4 EAN/UPC Composite symbols .31 14.5 Symbol separator character .32 14.6 2D component escape mechanism character 32 14.7 Linear-only transmission mode .32 14.8 GS1-128 emulation.32

18、14.9 Examples of transmitted data.33 15 Application-defined parameters.33 Annex A (normative) Symbology identifiers 34 Annex B (normative) Parsing AI element strings 36 Annex C (normative) 2D component escape mechanism.38 Annex D (informative) Printing considerations39 Annex E (informative) Base 928

19、 radix conversions.42 Bibliography 45 BS ISO/IEC 24723:2010 ISO/IEC 24723:2010(E) ISO/IEC 2010 All rights reserved vForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. Nat

20、ional bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interes

21、t. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with th

22、e rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard require

23、s approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 24723 was prepared

24、 by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 31, Automatic identification and data capture techniques. This second edition cancels and replaces the first edition (ISO/IEC 24723:2006), which has been technically revised. BS ISO/IEC 24723:2010 ISO/IEC 24723:2010

25、(E) vi ISO/IEC 2010 All rights reservedIntroduction Composite symbologies are a class of bar code symbology, the principal distinguishing feature of which is that they comprise two, or more, components, each of which is a distinct symbol, but which contain a set of related data. Typically one compon

26、ent is a linear symbol containing primary data, which can be read on its own in some areas of the application. The other component(s) is a two-dimensional symbol containing supplementary data which qualifies the primary message, and requiring all components to be read to extract the complete message

27、. The GS1 Composite symbology is one such symbology. The use of the symbology is intended to comply with the GS1 General Specifications. A GS1 Composite symbol consists of a linear component (encoding the items primary identification) associated with an adjacent 2D component (encoding supplementary

28、data, such as a batch number or expiration date). The GS1 Composite symbol always includes a linear component so that the primary identification is readable by all scanning technologies, and so that 2D imagers can use the linear component as a finder pattern for the adjacent 2D component. The GS1 Co

29、mposite symbol always includes a multi-row 2D component, for compatibility with linear and 2D imagers, and with linear and rastering laser scanners. GS1 Composite symbols are intended for encoding identification numbers and data supplementary to the identification in accordance with the GS1 General

30、Specifications. The administration of the numbering system by GS1 ensures that identification codes assigned to particular items are unique world-wide and that they and the associated supplementary data are defined in a consistent way. BS ISO/IEC 24723:2010 INTERNATIONAL STANDARD ISO/IEC 24723:2010(

31、E) ISO/IEC 2010 All rights reserved 1Information technology Automatic identification and data capture techniques GS1 Composite bar code symbology specification 1 Scope This International Standard defines the requirements for the GS1 Composite symbology. It specifies the GS1 Composite symbology chara

32、cteristics, data character encodation, symbol formats, dimensions and print quality requirements, error correction rules, and reference decoding algorithms. For those linear and 2D components of GS1 Composite symbols with published symbology specifications, those published specifications apply, exce

33、pt as specifically noted in this International Standard. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (incl

34、uding any amendments) applies. ISO/IEC 15415, Information technology Automatic identification and data capture techniques Bar code print quality test specification Two-dimensional symbols ISO/IEC 15416, Information technology Automatic identification and data capture techniques Bar code print qualit

35、y test specification Linear symbols ISO/IEC 15417, Information technology Automatic identification and data capture techniques Code 128 bar code symbology specification ISO/IEC 15420, Information technology Automatic identification and data capture techniques EAN/UPC bar code symbology specification

36、 ISO/IEC 15438, Information technology Automatic identification and data capture techniques PDF417 bar code symbology specification ISO/IEC 19762-1, Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 1: General terms relating to AIDC ISO/IEC

37、 19762-2, Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 2: Optically readable media (ORM) ISO/IEC 24728, Information technology Automatic identification and data capture techniques MicroPDF417 bar code symbology specification GS1 Genera

38、l Specifications (GS1, Brussels, Belgium) BS ISO/IEC 24723:2010 ISO/IEC 24723:2010(E) 2 ISO/IEC 2010 All rights reserved3 Terms, definitions, abbreviated terms and mathematical operators 3.1 Terms and definitions For the purposes of this document, the terms and definitions given in ISO/IEC 19762-1,

39、ISO/IEC 19762-2 and the following apply. 3.1.1 2D component CC two-dimensional portion of a GS1 Composite symbol, which encodes supplemental information about an item, such as its lot number or expiration date 3.1.2 AI element string character string containing an application identifier followed by

40、its associated data field 3.1.3 CC-A 2D component that is a structural variant of MicroPDF417 NOTE 1 CC-A components can be autodiscriminated from MicroPDF417 symbols, because CC-A components have a unique Rotation of 32 between any two adjacent Row Address Patterns. NOTE 2 CC-A is one of the three

41、choices for the 2D component in a symbol encoded in the GS1 Composite symbology. 3.1.4 CC-B 2D component that is a MicroPDF417 symbol which begins with PDF417 codeword 920, indicating conformance with this International Standard NOTE CC-B is one of the three choices for the 2D component in a symbol

42、encoded in the GS1 Composite symbology. 3.1.5 CC-C 2D component that is a PDF417 symbol which begins with PDF417 codeword 920, indicating conformance with this International Standard NOTE CC-C is one of the three choices for the 2D component in a symbol encoded in the GS1 Composite symbology. 3.1.6

43、linear component linear portion of a GS1 Composite symbol, which encodes the primary identification of an item 3.1.7 linkage flag indicator encoded in a GS1 DataBar or GS1-128 component to signal if a 2D component accompanies the linear component 3.1.8 RAP Rotation difference between the number desi

44、gnating a Center or Right Row Address Pattern and the number designating the nearest Row Address Pattern to the left, in the same row of a MicroPDF417 symbol, or a CC-A or CC-B component BS ISO/IEC 24723:2010 ISO/IEC 24723:2010(E) ISO/IEC 2010 All rights reserved 33.1.9 Row Address Pattern RAP one o

45、f a set of patterns made up of three bars and three spaces occupying ten modules, that serve both as start or stop patterns and as row indicators in a MicroPDF417 symbol, or a CC-A or CC-B component 3.1.10 separator pattern pattern between the linear and 2D components of a GS1 Composite symbol 3.1.1

46、1 symbol separator character non-data character that is used to break the transmitted data string into separate transmissions, each beginning with the appropriate symbology identifier prefix 3.2 Abbreviated terms AI Application Identifier 3.3 Mathematical operators and notational conventions For the

47、 purposes of this document, the following mathematical operators apply. div integer division operator which discards the remainder mod integer remainder after integer division The following ISO notational conventions are used. 0,2 a comma between digits separates the integer from the decimal fractio

48、n (e.g. 0,2 equals 2/10) except when used as an (n,k) designation 12 345 a space between digits indicates factors of a thousand 4 Symbol description 4.1 Basic characteristics A GS1 Composite symbol consists of a linear component associated with an adjacent 2D component. The characteristics of the GS

49、1 Composite symbology are: a) Encodable character set: 1) Both linear and 2D components encode a subset of ISO/IEC 646, consisting of the upper and lowercase letters, digits, and 21 selected punctuation characters. 2) The function character FNC1 and a Symbol Separator character. b) Symbol character structure: various edge-to-similar-edge decodable symbol characters are used, in accordance with the selected Linear and 2D components of the symbol. c) Code type: 1) Linear component: conti