SAE AS 9505A-2003 Bolt Machine-Hexagon Head Drilled 1 Hole Full Shank CRES UNS S66286 130 ksi min 5000-20 UNJF-3A《CRES、UNS S66286、130 ksi min、 5000-20 UNJF-3A、全螺杆、钻1孔的六角头机械螺栓》.pdf

《SAE AS 9505A-2003 Bolt Machine-Hexagon Head Drilled 1 Hole Full Shank CRES UNS S66286 130 ksi min 5000-20 UNJF-3A《CRES、UNS S66286、130 ksi min、 5000-20 UNJF-3A、全螺杆、钻1孔的六角头机械螺栓》.pdf》由会员分享，可在线阅读，更多相关《SAE AS 9505A-2003 Bolt Machine-Hexagon Head Drilled 1 Hole Full Shank CRES UNS S66286 130 ksi min 5000-20 UNJF-3A《CRES、UNS S66286、130 ksi min、 5000-20 UNJF-3A、全螺杆、钻1孔的六角头机械螺栓》.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、SAE Technical Standards Board Rules providethat: “This report is published by SAE to advancethe state oftechnical and engineering sciences.Theuse ofthis reportisentirelyvoluntary, andits applicabilityand suitabilityfor any particularuse,including any patentinfringement arising therefrom,isthe sole r

2、esponsibility of the user.”SAE reviews each technical reportatleastevery five years atwhich timeitmay bereaffirmed,revised, or cancelled.SAE invites your written comments and suggestions.SHEET 1 OF 3AS9505REV.ATHIRD ANGLE PROJECTIONAEROSPACE STANDARDAS9505REV. AISSUED 1999-04 REVISED 2003-04 REAFFIR

3、MED 2007-06(R) BOLT, MACHINE - HEXAGON HEAD,DRILLED, 1 HOLE, FULL SHANK,CRES, UNS S66286, 130 KSI MIN,.5000-20 UNJF-3APREPARED BY SAE COMMITTEE E-25, GENERAL STANDARDS FOR AEROSPACE & PROPULSION SYSTEMSFEDERAL SUPPLY CLASS 5306RATIONALE THIS DOCUMENT HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE 5-YEAR

4、 REVIEW POLICY. Copyright 2007 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. T

5、O PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitt

6、ed without license from IHS-,-,-BOLT, MACHINE - HEXAGON HEAD,DRILLED, 1 HOLE, FULL SHANK,CRES, UNS S66286, 130 KSI MIN,.5000-20 UNJF-3AAEROSPACE STANDARDAS9505SHEET 2 OF 3AS9505REV.AREV. A(R)Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking

7、 permitted without license from IHS-,-,-BOLT, MACHINE - HEXAGON HEAD,DRILLED, 1 HOLE, FULL SHANK,CRES, UNS S66286, 130 KSI MIN,.5000-20 UNJF-3AAEROSPACE STANDARDAS9505SHEET 3 OF 3AS9505REV.AREV. A(R)Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-