FORD WSS-M1H1101-A-2006 FABRIC ALCANTARA SUEDE PATTERN NON-WOVEN《阿尔坎塔拉皮制（ALCANTARA SUEDE）图案的无纺布》.pdf

《FORD WSS-M1H1101-A-2006 FABRIC ALCANTARA SUEDE PATTERN NON-WOVEN《阿尔坎塔拉皮制（ALCANTARA SUEDE）图案的无纺布》.pdf》由会员分享，可在线阅读，更多相关《FORD WSS-M1H1101-A-2006 FABRIC ALCANTARA SUEDE PATTERN NON-WOVEN《阿尔坎塔拉皮制（ALCANTARA SUEDE）图案的无纺布》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2006 10 23 Activated M. Dumitrescu Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 1 of 2 FABRIC, ALCANTARA SUEDE PATTERN, NON-WOVEN WSS-M1H1101-A 1. SCOPE The material defined by this specification is a need

2、le punched non-woven fabric made from polyester micro fiber, impregnated with micro-porous polyurethane. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2007 Model Year as a seat insert. 2.1 LIMITATIONS The perforated fabric needs an additio

3、nal backing scrim to increase the strength of the fabric. The embossed fabric may require additional foam and scrim in order to get desire appearance (as pillow-embossing). 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4 as app

4、licable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Weight, 450+/-50 g/m2(FLTM BN 106-01) Backcoat with flame retardant 70+

5、/-20 g/m23.3 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4 Fabric 77% Polyester 23% Polyurethane Backcoating Water dispersion of phosphor compound with acrylic binder Insert fabric Woven scrim ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1101-A Printed copies are uncontrolled Copyri

6、ght 2006, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) (A) 0.021 tex Polyester Fiber (B) 0.111 tex Polyester scrim (C) Micro-Porous Polyurethane 3.5 METHOD OF DYEING Piece dye, closed jet 3.6 FINISHING OPERATIONS Brushing, heatset, inspection, backcoat with flame retardant, final inspection