FORD WSE-M4C112-A-2010 GASOLINE UNLEADED INITIAL FILL REGULAR GRADE TO BE USED WITH FORD WSS-M99P1111-A 《无铅电泳原漆优质级汽油 与福特WSS-M99P1111-A 一起使用》.pdf

《FORD WSE-M4C112-A-2010 GASOLINE UNLEADED INITIAL FILL REGULAR GRADE TO BE USED WITH FORD WSS-M99P1111-A 《无铅电泳原漆优质级汽油 与福特WSS-M99P1111-A 一起使用》.pdf》由会员分享，可在线阅读，更多相关《FORD WSE-M4C112-A-2010 GASOLINE UNLEADED INITIAL FILL REGULAR GRADE TO BE USED WITH FORD WSS-M99P1111-A 《无铅电泳原漆优质级汽油 与福特WSS-M99P1111-A 一起使用》.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2010 08 23 Revised See Summary of Revisions C. Richardson, NA 2010 01 06 WSE-M4C111-A N-STATUS No known use. No replacement named D. DiGregorio, NA 1993 06 10 Released NE01E10127076090 M. Riley Printed copies are uncontrolled Copyright 2010, F

2、ord Global Technologies, LLC Page 1 of 3 GASOLINE, UNLEADED, INITIAL FILL, REGULAR GRADE WSE-M4C112-A 1. SCOPE The materials defined by these specifications are well-refined gasolines. 2. APPLICATION These specifications were released originally for gasolines used for initial fill for assembly plant

3、s in NA. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. These materials must meet the most recently approved requirements of ASTM D4814 Standard Specification for Automotive Spark-Ignition Engine Fuel and/or comply with the most recent loca

4、l, state or regional fuel regulation of plants location, plus the following: 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 ANTIKNOCK INDEX, (RON + MON)/2 87.0

5、min (ASTM D2699 / ASTM D2700) 3.6 SULPHUR CONTENT 80 mg/kg, max (ASTM D5453) 3.8 FERROUS CORROSION (ASTM D665, Procedure A at 4 hr.) B+, min 3.9 OXIDATION STABILITY 900 minutes, min (ASTM D525) 3.11 AROMATIC CONTENT Report (see 3.18) 3.12 INTAKE VALVE DEPOSITS (ASTM D5500) or 100 mg/valve, max (ASTM

6、 D6201) 50 mg/valve, max ENGINEERING MATERIAL SPECIFICATIONWSE-M4C112-APrinted copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 2 of 3 3.15 COLOR May include a dye in accordance with standard practice for purpose of vendor and user identification. 3.16 ADDITIVES Fuels shall

7、 contain normal commercial additives at concentrations representative of good commercial practice in the receiving locale (unless otherwise specified). Metallic additives shall not be used. Use of oxygenate additives other than ethanol must be approved by Fuels and Lubricants Engineering. Supplier m

8、ust identify additive formulation which includes additive type and concentration on specification supplement. 3.17 CERTIFICATION Supplier shall certify that the gasoline is a formulation that has been tested and meets Ford Motor Company requirements as stated in these specifications. Technical evide

9、nce of these data and manufacturing limits must be summarized as specified on the specification supplement. This certification shall be given by the authorized supplier representative and submitted to Ford Fuels and Lubricants Engineering activity for approval. Ford Fuels and Lubricants Engineering

10、may request additional data from supplier as needed to confirm conformance to specification. 3.18 ETHANOL CONTENT (ASTM D4815) 3.18.2 Aromatic content of fuel is 10% volume 0 - 10 % volume 3.18.3 Aromatic content of fuel is 10% volume 9 - 10 % volume 5. GENERAL INFORMATION The information given belo

11、w is provided for clarification and assistance in meeting the requirements of these specifications. 5.1 FLAMMABILITY This material represents a potential fire hazard. The Manufacturing Engineering Department shall notify both the Plant Security and the Safety Units of its presence in the Plant to as

12、sure that proper fire precautions are provided. The location in which it is used or stored shall be included in the notifications. 5.2 SAMPLING AND SUBMISSION OF SAMPLES (ASTM D 4057/ASTM D 4177) 5.3 Quality Control records must be made available to Fuels and Lubricants Engineering upon request 6. S

13、UMMARY OF REVISIONS 2010 08 23 Separated from WSE-M4C110-A and WSE-M4C111-A Revised: Title,1, 2, 3, 3.8, 3.9, 3.11, 3.16, 3.18,3.17, 3.00, page 3; Deleted: 3.3, 3.4,3.5,3.7, 3.18.1 Added:3.18.2,3.18.3 ENGINEERING MATERIAL SPECIFICATIONWSE-M4C112-APrinted copies are uncontrolled Copyright 2010, Ford

14、Global Technologies, LLC Page 3 of 3 Supplement Company _ Terminal Location _ Product _ Seasonal Grade _ Inspection Property Blending Limits Research Octane _ _ Motor Octane _ _ Sulfur, mg/kg _ _ Copper Strip Corrosion _ _ Silver Strip Corrosion _ _ Ferrous Corrosion _ _ Oxidation Stability, minutes

15、 _ _ Vapor Pressure, kPa _ _ Vapor/Liquid Ratio, TVL20, C _ _ Distillation Range _ _ 10% Evaporated, C _ _ 50% Evaporated, C _ _ 90% Evaporated, C _ _ End Point, C _ _ Ethanol content, % _ _ Oxygen content, % _ _ Aromatics, % volume _ _ Olefins, % volume _ _ Unwashed Gum, mg/100 mL _ _ Solvent Washed Gum, mg/100 mL _ _ Additives Description Concentration, ppm Detergent _ _ Antioxidant _ _ Corrosion inhibitor _ _ Metal Deactivator _ _ _ _ _ _ _ _ _ _ _ Comments: _ Signature _ Title _ Date _