ETSI TS 136 113-2016 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) Base Station (BS) and repeater ElectroMagnetic Compatibility (EMC) (V13 2 0 3GPP TS 36 113 version 13 2.pdf

《ETSI TS 136 113-2016 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) Base Station (BS) and repeater ElectroMagnetic Compatibility (EMC) (V13 2 0 3GPP TS 36 113 version 13 2.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 136 113-2016 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) Base Station (BS) and repeater ElectroMagnetic Compatibility (EMC) (V13 2 0 3GPP TS 36 113 version 13 2.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 1Evolved Universal TBase Station (BS) and r(3GPP TS 36.1TECHNICAL SPECIFICATION136 113 V13.1.1 (2016LTE; l Terrestrial Radio Access (E-repeater ElectroMagnetic Co(EMC) .113 version 13.1.1 Release 1316-05) UTRA); ompatibility 13) ETSI ETSI TS 136 113 V13.1.1 (2016-05)13GPP TS 36.113 version

2、13.1.1 Release 13Reference RTS/TSGR-0436113vd11 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Imp

3、ortant notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior writte

4、n authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document

5、should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following

6、 services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF versi

7、on shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registe

8、red for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 136 113 V13.1.1 (2016-05)23GPP TS 36.113 versio

9、n 13.1.1 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “In

10、tellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, in

11、cluding IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS)

12、 has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cros

13、s reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as describ

14、ed in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 136 113 V13.1.1 (2016-05)33GPP TS 36.113 version 13.1.1 Release 13Contents Intellectual Property R

15、ights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions, symbols and abbreviations . 7g33.1 Definitions 7g33.2 Symbols 9g33.3 Abbreviations . 9g34 Test conditions . 10g34.1 General . 10g34.2 Arrangements for establishing a communication link 10g34.2.1

16、 Multiple enclosure BS solution . 10g34.3 Narrow band responses on receivers 11g34.4 Test condition for Repeater 11g34.4.1 Arrangements for test signals for repeaters . 11g34.5 Exclusion bands 11g34.5.1 Transmitter exclusion band . 11g34.5.2 Receiver exclusion band . 12g34.6 BS test configurations 1

17、3g35 Performance assessment . 13g35.1 General . 13g35.2 Assessment of throughput in Downlink . 14g35.3 Assessment of throughput in Uplink 14g35.4 Ancillary equipment . 14g35.5 Repeaters 14g36 Performance Criteria 14g36.1 Performance criteria for continuous phenomena for BS 14g36.2 Performance criter

18、ia for transient phenomena for BS 15g36.3 Performance criteria for continuous phenomena for Ancillary equipment . 16g36.4 Performance criteria for transient phenomena for Ancillary equipment 16g36.5 Performance criteria for continuous phenomena for repeaters . 16g36.6 Performance criteria for transi

19、ent phenomena for repeaters . 17g37 Applicability overview . 17g37.1 Emission . 17g37.2 Immunity 18g37.3 Applicability of requirements in TS 37.113 . 18g38 Emission . 19g38.1 Test configurations . 19g38.2 Radiated emission from Base station, Repeater and ancillary equipment 19g38.2.1 Radiated emissi

20、on, Base stations and Repeater 19g38.2.1.1 Definition 20g38.2.1.2 Test method . 20g38.2.1.3 Limits 20g38.2.1.4 Interpretation of the measurement results . 21g38.2.2 Radiated emission, Ancillary equipment 21g38.2.2.1 Definition 21g38.2.2.2 Test method . 21g38.2.2.3 Limits 21g3ETSI ETSI TS 136 113 V13

21、.1.1 (2016-05)43GPP TS 36.113 version 13.1.1 Release 138.3 Conducted emission DC power input/output port 22g38.3.1 Definition 22g38.3.2 Test method 22g38.3.3 Limits 22g38.4 Conducted emissions, AC mains power input/output port . 23g38.4.1 Definition 23g38.4.2 Test method 23g38.4.3 Limits 23g38.5 Har

22、monic Current emissions (AC mains input port) 24g38.6 Voltage fluctuations and flicker (AC mains input port) . 24g38.7 Telecommunication ports . 24g38.7.1 Definition 24g38.7.2 Test method 24g38.7.3 Limits 24g39 Immunity 25g39.1 Test methods and levels for immunity tests . 25g39.2 Test configurations

23、 . 25g39.3 RF electromagnetic field (80 MHz - 1000 MHz, 1400 MHz to 2700 MHz) 26g39.3.1 Definition 26g39.3.2 Test method and level . 26g39.3.3 Performance criteria 26g39.4 Electrostatic discharge 26g39.4.1 Definition 27g39.4.2 Test method and level . 27g39.4.3 Performance criteria 27g39.5 Fast trans

24、ients common mode 27g39.5.1 Definition 27g39.5.2 Test method and level . 27g39.5.3 Performance criteria 28g39.6 RF common mode (0,15 MHz - 80 MHz) 28g39.6.1 Definition 28g39.6.2 Test method and level . 28g39.6.3 Performance criteria 28g39.7 Voltage dips and interruptions 29g39.7.1 Definition 29g39.7

25、.2 Test method and level . 29g39.7.3 Performance criteria 29g39.8 Surges, common and differential mode 30g39.8.1 Definition 30g39.8.2 Test method and level . 30g39.8.2.1 Test method for telecommunication ports directly connected to outdoor cables 30g39.8.2.2 Test method for telecommunication ports c

26、onnected to indoor cables . 30g39.8.2.3 Test method for AC power ports . 30g39.8.3 Performance criteria 30g3Annex A (informative): Change history . 32g3History 33g3ETSI ETSI TS 136 113 V13.1.1 (2016-05)53GPP TS 36.113 version 13.1.1 Release 13Foreword This Technical Specification has been produced b

27、y the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of

28、 release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance,

29、i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 136 113 V13.1.1 (2016-05)63GPP TS 36.113 version 13.1.1 Release 131 Scope The present document covers the assessment of E-UTRA bas

30、e stations, repeaters and associated ancillary equipment in respect of Electromagnetic Compatibility (EMC). The present document specifies the applicable test conditions, performance assessment and performance criteria for E-UTRA base stations, repeaters and associated ancillary equipment in one of

31、the following categories: - base sations of E-UTRA meeting the requirements of TS 36.104 2, with conformance demonstrated by compliance to TS 36.141 3. - repeaters of E-UTRA meeting the requirements of TS 36.106 4, with conformance demonstrated by compliance to TS 36.143 5. Technical requirements re

32、lated to the antenna port of E-UTRA base stations or repeaters are not included in the present document. These are found in the relevant product standards 2-5. The environment classification used in the present document refers to the environment classification used in IEC 61000-6-1 6 and IEC 61000-6

33、-3 7. The EMC requirements have been selected to ensure an adequate level of compatibility for apparatus at residential, commercial and light industrial environments. The levels, however, do not cover extreme cases which may occur in any location but with low probability of occurrence. 2 References

34、The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do

35、 not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary

36、 for 3GPP Specifications“. 2 3GPP TR 36.104: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) radio transmission and reception“. 3 3GPP TR 36.141: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) conformance testing “. 4 3GPP TR 36.106: “Evolved Universa

37、l Terrestrial Radio Access (E-UTRA); Repeater radio transmission and reception“. 5 3GPP TR 36.143: “Evolved Universal Terrestrial Radio Access (E-UTRA); Repeater conformance testing “. 6 IEC 61000-6-1: 2005; “Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 1: Immunity for r

38、esidential, commercial and light-industrial environments“. 7 IEC 61000-6-3: 1996; “Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 3: Emission standard for residential, commercial and light industrial environments“. 8 IEC 60050(161): “International Electrotechnical Vocabula

39、ry - Chapter 161: Electromagnetic compatibility“. ETSI ETSI TS 136 113 V13.1.1 (2016-05)73GPP TS 36.113 version 13.1.1 Release 139 3GPP TR 36.101: “Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) radio transmission and reception“. 10 ITU-R Rec. SM.329: “Unwanted emissions in

40、 the spurious domain“. 11 CISPR 22: “Limits and methods of measurement of radio disturbance characteristics of information technology equipment“. 12 CISPR 16-1-1: “Specification for radio disturbance and immunity measuring apparatus and methods - Measuring apparatus“. 13 IEC 61000-3-2 (2004): “Elect

41、romagnetic compatibility (EMC) - Part 3: Limits - Section 2: Limits for harmonic current emissions (equipment input current 16 A)“. 14 IEC 61000-3-12 (2005): “Electromagnetic compatibility (EMC) - Part 3-12: Limits- Limits for harmonic current produced by equipment connected to public low-voltage sy

42、stem with input current 16 A and 75 A. 15 IEC 61000-3-3 (2002): “Electromagnetic compatibility (EMC) - Part 3: Limits - Section 3: Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current 16 A“. 16 IEC 61000-3-11 (2000): “Electromagnetic compatibi

43、lity (EMC) - Part 3-11: Limits Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current 75 A and subject to conditional connections“. 17 IEC 61000-4-3: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 3:

44、Radiated, radio-frequency electromagnetic field immunity test“. 18 IEC 61000-4-2: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 2: Electrostatic discharge immunity test“. 19 IEC 61000-4-4: “Electromagnetic compatibility (EMC) - Part 4: Testing and measur

45、ement techniques - Section 4: Electrical fast transient/burst immunity test“. 20 IEC 61000-4-6: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 6: Immunity to contacted disturbances, induced by radio frequency fields“. 21 IEC 61000-4-11: “Electromagnetic c

46、ompatibility (EMC) - Part 4: Testing and measurement techniques - Section 11: Voltage dips, short interruptions and voltage variations. Immunity tests“. 22 IEC 61000-4-5: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 5: Surge immunity test“. 23 ITU-R Rec

47、ommendation SM.1539 (2001): “Variation of the boundary between the out-of-band and spurious domains required for the application of Recommendations ITU-R SM.1541 and ITU-R SM.329“. 24 3GPP TS 37.113: “E-UTRA, UTRA and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) Electromagnetic Compatibili

48、ty (EMC)“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 1.

49、Ancillary equipment: Equipment (apparatus), used in connection with a receiver, transmitter or transceiver is considered as an ancillary equipment (apparatus) if: ETSI ETSI TS 136 113 V13.1.1 (2016-05)83GPP TS 36.113 version 13.1.1 Release 13- the equipment is intended for use in conjunction with a receiver, transmitter or transceiver to provide additional operational and/or control features to the radio equipment, (e.g. to extend control to another position or location); and - the equipment cann