EN ISO 11297-2-2018 en Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2 Lining with continuous pipes.pdf

《EN ISO 11297-2-2018 en Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2 Lining with continuous pipes.pdf》由会员分享，可在线阅读，更多相关《EN ISO 11297-2-2018 en Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2 Lining with continuous pipes.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Plastics piping systems for renovation of underground drainage and sewerage networks under pressurePart 2: Lining with continuous pipes (ISO 11297-2:2018)BS EN ISO 11297-2:2018National forewordThis British Standard is t

2、he UK implementation of EN ISO 112972:2018. It is identical to ISO 112972:2018.The UK participation in its preparation was entrusted to Technical Committee PRI/88/3, Rehabilitation of pipeline systems using plastics piping materials and components.A list of organizations represented on this committe

3、e can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 88596 9ICS 91.140.80;

4、 23.040.20; 23.040.45; 93.030Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITI

5、SH STANDARDBS EN ISO 112972:2018EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 112972February 2018ICS 23.040.45; 23.040.20; 91.140.80; 93.030EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGCENCENELEC Management Centre: Avenue Marnix 17, B1000

6、Brussels 2018 CEN Ref. No. EN ISO 112972:2018: EAll rights of exploitation in any form and by any means reserved worldwide for CEN national MembersPlastics piping systems for renovation of underground drainage and sewerage networks under pressure Part 2: Lining with continuous pipes (ISO 112972:2018

7、)Systmes de canalisations en plastique pour la rnovation des rseaux de branchements et de collecteurs dassainissement enterrs sous pression Partie 2: Tubage par tuyau continu avec espace annulaire (ISO 112972:2018)KunststoffRohrleitungssysteme zur Renovierung von erdverlegten Abwasserdruckleitungen

8、Teil 2: RohrstrangLining (ISO 112972:2018)This European Standard was approved by CEN on 14 September 2017.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteratio

9、n. Uptodate lists and bibliographical references concerning such national standards may be obtained on application to the CENCENELEC Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by tran

10、slation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finlan

11、d, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.English VersionEN ISO 112972:20

12、18 (E)European forewordThis document (EN ISO 112972:2018) has been prepared by Technical Committee ISO/TC 138 “Rehabilitation of pipeline systems” in collaboration with Technical Committee CEN/TC 155 “Plastics piping systems and ducting systems” the secretariat of which is held by NEN.This European

13、Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2018, and conflicting national standards shall be withdrawn at the latest by August 2018.Attention is drawn to the possibility that some of the elements of

14、 this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.According to the CENCENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria

15、, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain,

16、Sweden, Switzerland, Turkey and the United Kingdom.Endorsement noticeThe text of ISO 112972:2018 has been approved by CEN as EN ISO 112972:2018 without any modification.2BS EN ISO 112972:2018ISO 112972:2018Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 Symbo

17、ls and abbreviated terms . 24.1 Symbols . 24.2 Abbreviated terms . 35 Pipes at the “M” stage 35.1 Material . 35.2 General characteristics . 35.3 Material characteristics . 35.4 Geometrical characteristics . 35.5 Mechanical characteristics 35.6 Physical characteristics . 35.7 Jointing . 35.8 Marking

18、. 35.9 Regional requirements for pipes . 46 Fittings at the “M” stage . 46.1 Requirements . 46.2 Marking . 46.3 Regional requirements for fittings . 47 Ancillary components . 48 Fitness for purpose of the system for pipes and fittings at the “I” stage 49 Installation practice 49.1 Preparatory work .

19、 49.2 Storage, handling and transport 49.3 Equipment . 59.3.1 Butt fusion equipment and de-beading equipment. 59.3.2 Pipe rollers 59.3.3 Winching and rod-pulling equipment . 59.3.4 Pipe entry guides . 59.3.5 Electrofusion equipment 69.3.6 Inspection equipment . 69.3.7 Lifting equipment 69.4 Installa

20、tion 69.5 Process-related inspection and testing 79.6 Lining termination . 79.7 Reconnection to the existing pipeline system 79.8 Final inspection and testing . 79.9 Documentation . 7Annex A (normative) Layered pipes 8Bibliography 9 ISO 2018 All rights reserved iiiContents PageBS EN ISO 112972:2018I

21、SO 112972:2018ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject

22、for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) o

23、n all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted

24、. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying an

25、y or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of us

26、ers and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barrie

27、rs to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.This document was prepared by Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for the transport of fluids, Subcommittee SC 8, Rehabilitation of pipeline systems.A list of all parts in the ISO 11297 series, can

28、 be found on the ISO website.iv ISO 2018 All rights reservedBS EN ISO 112972:2018ISO 112972:2018IntroductionThis document is part of a system standard for plastics piping systems of various materials used for renovation of existing pipelines in a specified application area. System standards for reno

29、vation dealing with the following applications are either available or in preparation: ISO 11296, Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks; ISO 11297, Plastics piping systems for renovation of underground drainage and sewerage networks under p

30、ressure (this application); ISO 11298, Plastics piping systems for renovation of underground water supply networks; ISO 11299, Plastics piping systems for renovation of underground gas supply networks.These system standards are distinguished from system standards for conventionally installed plastic

31、s piping systems by the requirement to verify certain characteristics in the “as installed” condition, after site processing. This is in addition to verification of characteristics of plastics piping systems “as manufactured”.Each of the system standards comprises a: Part 1: Generaland all applicabl

32、e renovation technique family-related parts, which for drainage and sewerage networks under pressure include or potentially include the following: Part 2: Lining with continuous pipes (this document) Part 3: Lining with close-fit pipes Part 4: Lining with cured-in-place pipes Part 5: Lining with dis

33、crete pipes Part 6: Lining with adhesive-backed hosesThe requirements for any given renovation technique family are specified in Part 1, applied in conjunction with the relevant other part. For example, both ISO 11297-1 and this document, together specify the requirements relating to lining with con

34、tinuous pipes. For complementary information, see ISO 11295. Not all technique families are pertinent to every area of application and this is reflected in the part numbers included in each system standard.A consistent structure of clause headings has been adopted for all parts to facilitate direct

35、comparisons across renovation technique families.Figure 1 shows the common part and clause structure and the relationship between ISO 11297 and system standards for other applications.Annex A of this document is normative. ISO 2018 All rights reserved vBS EN ISO 112972:2018ISO 112972:2018Figure 1 Fo

36、rmat of the renovation system standardsvi ISO 2018 All rights reservedBS EN ISO 112972:2018Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Part 2: Lining with continuous pipes (ISO 11297-2:2018)1 ScopeThis document, in conjunction with ISO 112971,

37、specifies requirements and test methods for pipes and fittings which are part of plastics piping systems installed as continuous pipes in the renovation of underground drainage and sewerage networks under pressure. It is applicable to polyethylene (PE) pipes of three different types: PE solid wall s

38、ingle layered pipes (nominal outside diameter, dn), including any identification stripes; PE pipes with coextruded layers on either or both the outside and inside of the pipe (total outside diameter, dn), as specified in Annex A, where all layers have the same MRS rating; PE coated pipes (outside di

39、ameter, dn) having a peelable, contiguous, thermoplastics additional layer on the outside of the pipe (“coated pipe”), see Annex A.In addition it covers: jointing of pipe lengths by means of butt fusion; fabricated and injectionmoulded fittings made of PE.It is applicable to PE pipes, fittings and a

40、ssemblies intended to be used at an operating temperature of 20 C as the reference temperature.NOTE For applications operating at constant temperatures greater than 20 C and up to 40 C, see ISO 44271:2007, Annex A.2 Normative referencesThe following documents are referred to in the text in such a wa

41、y that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 44271, Plastics piping systems Polyethylene (PE) pipes and

42、 fittings for water supply Part 1: GeneralISO 44272, Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 2: PipesISO 44273, Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 3: FittingsISO 44275, Plastics piping systems Polyethylene (PE

43、) pipes and fittings for water supply Part 5: Fitness for purpose of the systemISO 112971:2018, Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Part 1: GeneralISO 121761, Plastics pipes and fittings Equipment for fusion jointing polyethylene system

44、s Part 1: Butt fusionINTERNATIONAL STANDARD ISO 11297-2:2018 ISO 2018 All rights reserved 1BS EN ISO 112972:2018ISO 11297-2:2018ISO 121762, Plastics pipes and fittings Equipment for fusion jointing polyethylene systems Part 2: ElectrofusionEN 122011, Plastics piping systems for water supply, and for

45、 drainage and sewerage under pressure Polyethylene (PE) Part 1: GeneralEN 122012, Plastics piping systems for water supply, and for drainage and sewerage under pressure Polyethylene (PE) Part 2: PipesEN 122013, Plastics piping systems for water supply, and for drainage and sewerage under pressure Po

46、lyethylene (PE) Part 3: FittingsEN 122015, Plastics piping systems for water supply, and for drainage and sewerage under pressure Polyethylene (PE) Part 5: Fitness for purpose of the system3 Terms and definitionsFor the purposes of this document the terms and definitions given in ISO 112971:2013 and

47、 the following apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp3.1compound formulationclearly defined homogenous mixtu

48、re of base polymer with additives, e.g. antioxidants, pigments, stabilisers and others, at a dosage level necessary for the processing and intended use of the final product3.2coated pipepipe with a peelable, contiguous thermoplastic additional layer on the outside of the pipe3.3solid wall single lay

49、ered pipepipe with smooth internal and external surface, extruded from the same compound/formulation throughout the wall3.4pipe with co-extruded layerspipe with smooth internal and external surface, having coextruded layers on either or both the outside and inside of the pipe, where all layers have the same MRS rating3.5out-of-roundnessdifference between the measured maximum and the measured minimum outside diameter in the same crosssectional