EN 60086-2-2011 en Primary batteries - Part 2 Physical and electrical specifications (Remains Current)《原电池 第2部分 物理和电气规范》.pdf

《EN 60086-2-2011 en Primary batteries - Part 2 Physical and electrical specifications (Remains Current)《原电池 第2部分 物理和电气规范》.pdf》由会员分享，可在线阅读，更多相关《EN 60086-2-2011 en Primary batteries - Part 2 Physical and electrical specifications (Remains Current)《原电池 第2部分 物理和电气规范》.pdf（66页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationPrimary batteriesPart 2: Physical and electrical specificationsBS EN 60086-2:2011National forewordThis British Standard is the UK implementation of EN 60086-2:2011. It is identic

2、al to IEC 60086-2:2011. It supersedes BS EN 60086-2:2007, which will be withdrawn on 24 March 2014.The UK participation in its preparation was entrusted to Technical Committee CPL/35, Primary cells.A list of organizations represented on this committee can be obtained on request to its secretary.This

3、 publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011ISBN 978 0 580 69237 6 ICS 29.220.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published und

4、er the authority of the Standards Policy and Strategy Committee on 30 June 2011.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 60086-2:2011EUROPEAN STANDARD EN 60086-2 NORME EUROPENNE EUROPISCHE NORM March 2011 CENELEC European Committee for Electrotechnical Stan

5、dardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60086-2:2011

6、E ICS 29.220.10 Supersedes EN 60086-2:2007English version Primary batteries - Part 2: Physical and electrical specifications (IEC 60086-2:2011) Piles primaires - Partie 2: Spcifications physiques et lectriques (CEI 60086-2:2011) Primrbatterien - Teil 2: Physikalische und elektrische Spezifikationen

7、(IEC 60086-2:2011) This European Standard was approved by CENELEC on 2011-03-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists a

8、nd bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respo

9、nsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France

10、, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 60086-2:2011 - 2 - Foreword The text of document 35/1271/CDV, future edition 12 of

11、IEC 60086-2, prepared by IEC TC 35, Primary cells and batteries, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60086-2 on 2011-03-24. This European Standard supersedes EN 60086-2:2007. Significant changes from EN 60086-2:2007 are the deletion of eight battery types

12、 from this standard, the addition of an air hole placement diagram and deletion of the resistive hearing aid tests for the P-system (zinc air) hearing aid batteries, standardization of a new form of alkaline (L-system) 9 volt battery (6LP3146), addition of a common designation reference as Annex D a

13、nd general adjustment of application tests and their minimum average duration values to reflect changes in battery usage. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifyin

14、g any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2011-12-24 latest date by which the national standards conflicting with the EN have to be with

15、drawn (dow) 2014-03-24 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60086-2:2011 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the sta

16、ndards indicated: IEC 60086-3 NOTE Harmonized as EN 60086-3. IEC 60086-4 NOTE Harmonized as EN 60086-4. IEC 60086-5 NOTE Harmonized as EN 60086-5. IEC 62281 NOTE Harmonized as EN 62281. _ - 3 - EN 60086-2:2011 Annex ZA (normative) Normative references to international publications with their corresp

17、onding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an interna

18、tional publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60086-1 2011 Primary batteries - Part 1: General EN 60086-1 2011 ISO 1101 2004 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tole

19、rances of form, orientation, location and run-out EN ISO 1101 - 2 60086-2 IEC:2011 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope . 7 2 Normative references . 7 3 Terms, definitions, symbols and abbreviations 7 3.1 Terms and definitions 7 3.2 Symbols and abbreviations 8 4 Battery dimensions, symbols

20、 9 5 Constitution of the battery specification tables 9 6 Physical and electrical specifications 11 6.1 Category 1 batteries 11 6.1.1 Category 1 Physical and electrical specifications 11 6.2 Category 2 batteries 18 6.2.1 Category 2 Physical and electrical specifications 18 6.3 Category 3 batteries 2

21、0 6.3.1 Category 3 Physical and electrical specifications 20 6.4 Category 4 batteries 21 6.4.1 Category 4 Physical and electrical specifications 21 6.5 Category 5 batteries 30 6.5.1 Category 5 Physical and electrical specifications 30 6.6 Category 6 batteries 34 6.6.1 Category 6 Physical and electri

22、cal specifications 34 Annex A (informative) Tabulation of batteries by application 48 Annex B (informative) Cross-reference index . 54 Annex C (informative) Index . 57 Annex D (informative) Common designation 58 Bibliography 59 Figure 1 Category 1 dimensional drawings . 11 Figure 2 Category 2 dimens

23、ional drawing 18 Figure 3 Category 3 dimensional drawings . 20 Figure 4 Category 4 dimensional drawing 21 Figure 5 Gauge drawing for P system batteries 24 Figure 6 Airhole placement diagram . 25 Figure 7 Dimensional drawings: R40 30 Figure 8 Dimensional drawing: 4LR44, 2CR13252, 4SR44 . 32 Figure 9

24、Dimensional drawings: 3R12P, 3R12S, 3LR12 . 34 Figure 10 Dimensional drawings: 4LR61 36 Figure 11 Dimensional drawings: CR-P2 37 Figure 12 Dimensional drawings: 2CR5 . 38 Figure 13 Dimensional drawings: 2EP3863 39 Figure 14 Dimensional drawings: 4R25X, 4LR25X . 40 Figure 15 Dimensional drawings: 4R2

25、5Y 41 BS EN 60086-2:201160086-2 IEC:2011 3 Figure 16 Dimensional drawings: 4R25-2, 4LR25-2 42 Figure 17 Dimensional drawings: 6AS4 43 Figure 18 Dimensional drawings: 6AS6 44 Figure 19 Dimensional drawings: 6F22, 6LR61, 6LP3146 45 Figure 20 Dimensional drawings: 6F100 47 Table A.1 Road warning lamp 4

26、8 Table A.2 Industrial equipment. 48 Table A.3 Electric fence controller . 48 Table A.4 Radio . 49 Table A.5 Radio/Clock . 49 Table A.6 Electronic equipment . 49 Table A.7 Pager . 49 Table A.8 Hearing aid 50 Table A.9 Photo . 50 Table A.10 Portable lighting . 50 Table A.11 Smoke detector 51 Table A.

27、12 Toy (motor) 51 Table A.13 Remote control. 51 Table A.14 Digital audio . 51 Table A.15 Photo flash . 52 Table A.16 Laser pointer 52 Table A.17 Portable stereo 52 Table A.18 CD/Electronic games 52 Table A.19 Digital still camera . 52 Table A.20 Automatic camera 52 Table A.21 Tape recorder 53 Table

28、B.1 Category 1 batteries. 54 Table B.2 Category 2 batteries. 54 Table B.3 Category 3 batteries. 54 Table B.4 Category 4 batteries. 55 Table B.5 Category 5 batteries. 56 Table B.6 Category 6 batteries. 56 Table C.1 Index . 57 Table D.1 Index . 58 BS EN 60086-2:2011 4 60086-2 IEC:2011 INTERNATIONAL EL

29、ECTROTECHNICAL COMMISSION _ PRIMARY BATTERIES Part 2: Physical and electrical specifications FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IE

30、C is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS)

31、 and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with

32、the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as near

33、ly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that

34、 sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees

35、 undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide an

36、y attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest ed

37、ition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether d

38、irect or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispe

39、nsable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60086-2

40、has been prepared by IEC technical committee 35: Primary cells and batteries. This twelfth edition cancels and replaces the eleventh edition (2006) and constitutes a technical revision. Significant changes from the previous edition are the deletion of eight battery types from this standard, the addi

41、tion of an air hole placement diagram and deletion of the resistive hearing aid tests for the P-system (zinc air) hearing aid batteries, standardization of a new form of alkaline (L-system) 9 volt battery (6LP3146), addition of a common designation reference as Annex D and general adjustment of appl

42、ication tests and their minimum average duration values to reflect changes in battery usage. BS EN 60086-2:201160086-2 IEC:2011 5 The text of this standard is based on the following documents: CDV Report on voting 35/1271/CDV 35/1275/RVC Full information on the voting for the approval of this standa

43、rd can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 60086 series, under the general title Primary batteries, can be found on the IEC website. The committee has decide

44、d that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended.

45、 BS EN 60086-2:2011 6 60086-2 IEC:2011 INTRODUCTION The technical content of this part of IEC 60086 provides physical dimensions, discharge test conditions and discharge performance requirements. IEC 60086-2 complements the general information and requirements of IEC 60086-1. This part was prepared

46、to benefit primary battery users, device designers and battery manufacturers by furnishing the specifics of form, fit and function for individual standardized primary cells and batteries. Over the years, this part has been changed to improve its contents and may again be revised in due course in the

47、 light of comments made by national committees and experts on the basis of practical experience and changing technology. This current revision is the result of a reformatting initiative, as well as some content changes, aimed at making this part more user-friendly, less ambiguous, and, from a cross

48、reference basis, fully harmonized with other parts of IEC 60086. NOTE Safety information is available in IEC 60086-4, IEC 60086-5 and IEC 62281. BS EN 60086-2:201160086-2 IEC:2011 7 PRIMARY BATTERIES Part 2: Physical and electrical specifications 1 Scope This part of IEC 60086 is applicable to prima

49、ry batteries based on standardized electro-chemical systems. It specifies the physical dimensions, the discharge test conditions and discharge performance requirements. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the late