EN 13894-2-2002 en Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 2 After hardenin.pdf

《EN 13894-2-2002 en Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 2 After hardenin.pdf》由会员分享，可在线阅读，更多相关《EN 13894-2-2002 en Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 2 After hardenin.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 13894-2:2002 Products and systems for the protection and repair of concrete structures Test methods Determination of fatigue under dynamic loading Part 2: After hardening The European Standard EN 13894-2:2002 has the status of a British Standard ICS 91.080.40 BS EN 13894-2:200

2、2 This British Standard, having been prepared under the direction of the Building and Civil Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 4 November 2002 BSI 4 November 2002 ISBN 0 580 40684 9 National foreword T

3、his British Standard is the official English language version of EN 13894-2:2002. The UK participation in its preparation was entrusted by Technical Committee B/517, Concrete, to Subcommittee B/517/8, Protection and repair of concrete structures, which has the responsibility to: A list of organizati

4、ons represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspon

5、dence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of i

6、tself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments an

7、d promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 7 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Da

8、te CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN138942 October2002 ICS91.080.40 Englishversion Productsandsystemsfortheprotectionandrepairofconcrete structuresTestmethodsDeterminationoffatigueunder dynamicloadingPart2:Afterhardening Produitsetsystmespourlaprotectionetlarparationdes struc

9、turesenbtonMthodesdessaisDterminationde lafatiguesouschargedynamiquePartie2:Aprs durcissement ProdukteundSystemefrdenSchutzunddie InstandsetzungvonBetontragwerkenPrfverfahren BestimmungdesErmdungsverhaltensbeidynamischer BelastungTeil2:NachdemErhrten ThisEuropeanStandardwasapprovedbyCENon11July2002.

10、 CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyC

11、ENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustri

12、a,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B10

13、50Brussels 2002CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN138942:2002EEN138942:2002(E) 2 Contents page Foreword3 1 Scope 4 2 Normativereferences 4 3 Principle4 4 Equipment.4 5 Testprocedure .4 6 Testreport . .5EN138942:2002(E) 3 Foreword Thisdo

14、cument(EN138942:2002)hasbeenpreparedbyTechnicalCommitteeCEN /TC 104“Concreteand relatedproducts“,thesecretariatofwhichisheldbyDIN. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidenticaltextor byendorsement,atthelatestbyApril2003,andconflictingnationalstandardss

15、hallbewithdrawnatthelatestby April2003. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,CzechRepublic,Denmark,Finland, France,Germany,Greece,Iceland,Ireland,Italy,Luxembourg,Malta,Netherland

16、s,Norway,Portugal,Spain, Sweden,SwitzerlandandtheUnitedKingdom.EN138942:2002(E) 4 1Scope ThispartofthisEuropeanStandarddescribesamethodfordeterminingtheresponsetofatigueunderdynamic loadingofstructuralbondingagentsafterhardening. 2 Normativereferences ThisEuropeanStandardincorporatesbydatedorundated

17、reference,provisionsfromotherpublications.These normativereferencesarecitedattheappropriateplacesinthetext,andthepublicationsarelistedhereafter.For datedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplytothisEuropean Standardonlywhenincorporatedinitbyamendmentorrevision.Forun

18、datedreferencesthelatesteditionofthe publicationreferredtoapplies(includingamendments). ENISO85011,PreparationofsteelsubstratesbeforeapplicationofpaintsandrelatedproductsVisual assessmentofsurfacecleanlinessPart1:Rustgradesandpreparationgradesofuncoatedsteelsubstratesand ofsteelsubstratesafteroveral

19、lremovalofpreviouscoatings(ISO85011:1988). ISO3800, ThreadedfastenersAxialloadfatiguetestingTestmethodsandevaluationofresults . 3Principle Aslantsheartestisconductedusingsteelprismsofsize40mm 40mm 160mmwithabondlineinclinedatan angleof45(Figure1).Thetestisperformedbyapplyingadynamictensionforcealong

20、thelongitudinalaxisofthe bondedprism.Thenumberofloadcyclesisprogressivelyraiseduntilfailureoccurs. 4Equipment 4.1 Steelprisms,40mm 40mm 160mmcutatanangleof45,asshowninFigure1withthreadedholesat thetwoextremitiesforconnectiontosteelbarsasdescribedin5.3. 4.2 Gritblastingequipmentwithoilseparator. 4.3

21、Atensiontestingmachinecapableofapplyingloadcycleswithafrequencyof2Hzto5Hzwithloads between5kNand20kNandadeviceforcountingtheloadcycles. 5 Testprocedure 5.1 Preparationoftestpieces Thetestspecimensshallbepreparedat21C2CandaRHof60%10%.Thebondingsurfacesofthesteel prismsshallbedegreasedusingasuitablede

22、greasingagentandthengritblastedtogradeSA2.5ofEN ISO85011.Thesteelsurfacesshallthenbevacuumedtoremoveanydust.Mixtheadhesiveinaccordancewith themanufacturersinstructionsandapplyittoeachofthepreparedbondingsurfacessuchthatwhentheyare broughttogetherusingthe4screwsshowninFigure1abondlinethicknessof1,0mm

23、0,1mmisachievedor suchotherbondlinethicknessasshallbespecifiedinaccordancewiththeuseoftheproduct.Theassembledtest specimensshallbestoredat21C2CandaRH60%10%foratleast7days. 5.2 Numberoftestspecimens Threeprismsshallbetestedtofindthemeanshorttermfailureload, F um .Fiveprismsshallbesubjectedto dynamicl

24、oadingtestateachofthreeloadranges.EN138942:2002(E) 5 5.3Testing Theshorttermfailureloadforeachprism, F u ,isdeterminedbyapplyingaconstantrateofloadingof1kN/suntil failure.Themeanvalue, F um ,isthencalculated. Thefatiguetestshallbeperformedatthreeloadranges.Ineachcasethelowestloadshallbe5%of F um .Th

25、e threeupperloadsshallbe80%,70%and60%of F um ,respectively.Ifmorethanthreeprismsdonotfailbefore 10 7 loadcyclesatthelowestloadrange,thetestshallberepeatedatthenexthighestloadrange. Connecttheendsoftheprismsbyscrewinginsteelbarsof10mmdiameter.Thelengthofthesebarsshallbeat least200mm.Removeorloosenthe

26、bondlineadjustmentscrews.Carryoutthedynamictensiontestin accordancewithISO3800atacyclefrequencybetween2Hzand5Hz.Recordthenumberofloadcyclesandthe failuremode(see5.4). 5.4 Failuremode Recordthefailuremodeasoneofthefollowingtwotypes: TypeA:cohesionfailurewithintheadhesive; TypeB:adhesionfailureatoneof

27、theinterfaces. Ifamixtureoffailuremodesisrecorded,visuallydeterminethesurfaceareapercentageforeachtypeof failureandexpressthisasaratio,forexample: A:B=70:30 6 Testreport Thetestreportshallincludethefollowinginformation: a) areferencetothistestmethodstandard; b) nameandaddressofthetestlaboratory; c)

28、identificationnumberanddateofthetestreport; d) nameandaddressofthemanufacturerorsupplieroftheproduct; e) nameandidentificationmarksorbatchnumberoftheproduct; f) dateofsupplyoftheproduct; g) dateofpreparationofthetestspecimensandanydeviationfromtheprescribedmethodofpreparation; h) conditionsofstorage

29、ofpreparedspecimenspriortotest; i) dateoftestanddetailsofthetestequipmentused,includingthemake,typeandcapacityandthecalibration detailsortheidentificationnumberoftheapparatus; j) theshorttermfailureloadofeachprism, F u ,andthemeanvalue, F um ; k) thebottomloadandtheupperloadofeachtestinpercentagesof

30、 F um ; l) thefrequencyoftheloadcycles; m) thenumberofloadcyclesofeachtest;EN138942:2002(E) 6 n) thefailuremodeofeachtestspecimen; o) precisiondata; p) anydeviationfromthisstandard; q) dateoftestreportandsignature.EN138942:2002(E) 7 Dimensionsinmillimetres Key 1 Threadedholeforconnectionto10mmdiamet

31、ersteelbar 2 40mm 40mm 160mmsteelprism 3 Bondline 4 Screwclamps Figure1SlantsheartestintensionBS EN 13894-2:2002 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on sta

32、ndards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the qualit

33、y of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)2

34、0 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (

35、0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherw

36、ise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products an

37、d services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits co

38、ntact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.

39、bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or tr

40、ansmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.