EN 12735-1-2016 en Copper and copper alloys - Seamless round tubes for air conditioning and refrigeration - Part 1 Tubes for piping systems《铜和铜合金空气调节和制冷的无缝管-第1部分 管道系统的管道》.pdf

《EN 12735-1-2016 en Copper and copper alloys - Seamless round tubes for air conditioning and refrigeration - Part 1 Tubes for piping systems《铜和铜合金空气调节和制冷的无缝管-第1部分 管道系统的管道》.pdf》由会员分享，可在线阅读，更多相关《EN 12735-1-2016 en Copper and copper alloys - Seamless round tubes for air conditioning and refrigeration - Part 1 Tubes for piping systems《铜和铜合金空气调节和制冷的无缝管-第1部分 管道系统的管道》.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 12735-1:2016Copper and copper alloys Seamless, round tubes for airconditioning and refrigerationPart 1: Tubes for piping systemsBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 12735-1:2016 BRITISH STANDARDNational forewordThis British Standard is the UK i

2、mplementation of EN 12735-1:2016.It supersedes BS EN 12735-1:2010 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee NFE/34/1, Wrought and unwrought copper and copperalloys.A list of organizations represented on this committee can beobtained on request to

3、its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN 978 0 580 90919 1ICS 23.040.15; 77.150.30; 91.140.30Compliance wi

4、th a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 June 2016.Amendments issued since publicationDate Text affectedBS EN 12735-1:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE

5、 NORM EN 12735-1 June 2016 ICS 23.040.15 Supersedes EN 12735-1:2010English Version Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems Cuivre et alliages de cuivre - Tubes ronds sans soudure pour lair conditionn et la rfrigration

6、 - Partie 1: Tubes pour canalisations Kupfer und Kupferlegierungen - Nahtlose Rundrohre fr die Klte- und Klimatechnik - Teil 1: Rohre fr Leitungssysteme This European Standard was approved by CEN on 28 February 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which sti

7、pulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European

8、 Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are th

9、e national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romani

10、a, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by a

11、ny means reserved worldwide for CEN national Members. Ref. No. EN 12735-1:2016 EBS EN 12735-1:2016EN 12735-1:2016 (E) 2 Contents Page European foreword . 4 Introduction 6 1 Scope 7 2 Normative references 7 3 Terms and definitions . 8 4 Designations 9 4.1 Material . 9 4.1.1 General 9 4.1.2 Symbol . 9

12、 4.1.3 Number . 9 4.2 Material condition 9 4.3 Product 9 5 Ordering information . 10 6 Requirements 11 6.1 Composition . 11 6.2 Mechanical properties 11 6.3 Dimensions and tolerances 12 6.3.1 General . 12 6.3.2 Nominal dimensions . 12 6.3.3 Tolerances on outside diameter . 14 6.3.4 Tolerances on wal

13、l thickness . 14 6.3.5 Tolerances on length. 15 6.3.6 Tolerances of form . 15 6.4 Drift expanding . 15 6.5 Freedom from defects . 15 6.6 Surface quality. 15 7 Sampling 16 8 Test methods . 16 8.1 Analysis 16 8.2 Tensile test . 16 8.3 Hardness test . 16 8.4 Drift expanding test . 16 8.5 Carbon content

14、 test . 16 8.6 Freedom from defects test 16 8.7 Retests 17 9 Declaration of conformity and inspection documentation . 17 9.1 Declaration of conformity . 17 9.2 Inspection documentation 17 10 Packaging, marking and form of delivery . 17 10.1 Packaging and marking . 17 10.2 Marking of tubes . 18 BS EN

15、 12735-1:2016EN 12735-1:2016 (E) 3 10.3 Form of delivery 18 Annex A (normative) Marking durability test . 19 A.1 Abrasion test 19 A.2 Climatic test 19 Annex B (normative) Freedom from defects test . 20 B.1 Eddy current test 20 B.2 Hydrostatic test . 20 B.3 Pneumatic test . 21 Annex ZA (informative)

16、Relationship between this European Standard and the Essential Requirements of Directive 2014/68/EU aimed to be covered . 22 Bibliography . 23 Tables Table 1 Composition of copper . 11 Table 2 Composition of low alloyed copper alloys 11 Table 3 Mechanical properties . 12 Table 4 Nominal outside diame

17、ters and wall thicknesses . 13 Table 5 Tolerances on outside diameter 14 Table 6 Tolerances on wall thickness 14 Table B.1 Maximum drill diameters for the reference standard tube . 20 Table B.2 Hydrostatic pressure test 20 Table ZA.1 Correspondence between this European Standard and Annex I of the D

18、irective 2014/68/EU 22 BS EN 12735-1:2016EN 12735-1:2016 (E) 4 European foreword This document (EN 12735-1:2016) has been prepared by Technical Committee CEN/TC 133 “Copper and copper alloys”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national sta

19、ndard, either by publication of an identical text or by endorsement, at the latest by December 2016 and conflicting national standards shall be withdrawn at the latest by December 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent righ

20、ts. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12735-1:2010. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requir

21、ements of Directive 2014/68/EU, Pressure Equipment Directive (PED). For relationship with Directive 2014/68/EU, see informative Annex ZA, which is an integral part of this document. In comparison with EN 12735-1:2010, the following significant technical changes were made: a) The size range of the ou

22、tside diameter has been increased from133 mm to 219 mm; b) Nominal outside diameters have been added to Table 3; c) The alloy CuFe2P (CW107C) has been included; d) Sub-clause 8.6 has been revised and a new normative Annex B “Freedom from defects test“ has been added. EN 12735, Copper and copper allo

23、ys Seamless, round tubes for air conditioning and refrigeration con-sists of two parts: Part 1: Tubes for piping systems; Part 2: Tubes for equipment. This is one of a series of European Standards for copper and copper alloy tubes. Other products are specified as follows: EN 1057, Copper and copper

24、alloys Seamless, round copper tubes for water and gas in sanitary and heating applications EN 12449, Copper and copper alloys Seamless, round tubes for general purposes EN 12450, Copper and copper alloys Seamless, round copper capillary tubes EN 12451, Copper and copper alloys Seamless, round tubes

25、for heat exchangers EN 12452, Copper and copper alloys Rolled, finned, seamless tubes for heat exchangers BS EN 12735-1:2016EN 12735-1:2016 (E) 5 EN 12735-2, Copper and copper alloys Seamless, round tubes for air conditioning and refrigera-tion Part 2: Tubes for equipment EN 13348, Copper and copper

26、 alloys Seamless, round copper tubes for medical gases or vacuum EN 13349, Copper and copper alloys Pre-insulated copper tubes with solid covering EN 13600, Copper and copper alloys Seamless copper tubes for electrical purposes According to the CEN-CENELEC Internal Regulations, the national standard

27、s organizations of the fol-lowing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxe

28、mbourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 12735-1:2016EN 12735-1:2016 (E) 6 Introduction It is recommended that tubes manufactured to this European Standard are certified as conforming to the re

29、quirements of this standard based on continuing surveillance which should be coupled with an assessment of a suppliers quality management system such as EN ISO 9001. NOTE It is advised to take appropriate precautions if applying insulating material because it could be detri-mental to the tube. BS EN

30、 12735-1:2016EN 12735-1:2016 (E) 7 1 Scope This European Standard specifies the requirements, sampling, test methods and conditions of delivery for seamless round copper and copper alloy tubes used for refrigeration and air-conditioning piping systems (i.e. piping, connections and repairs). It is ap

31、plicable to tubes with an outside diameter from 3 mm up to and including 219 mm. Tubes made of the copper-grade Cu-DHP are supplied in straight lengths in the material conditions hard or half-hard, or in coils in the annealed material condition. Tubes made of the alloy CuFe2P are supplied in straigh

32、t length in the material conditions hard or annealed. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are in-dispensable for its application. For dated references, only the edition cited applies. For undated refer-ences, the latest

33、 edition of the referenced document (including any amendments) applies. EN 723, Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings EN 1173, Copper and copper alloys - Material condition designation EN 1655, Copper and

34、 copper alloys - Declarations of conformity EN 1971-1, Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface EN 1971-2, Copper and copper alloys - Eddy current test for measu

35、ring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface EN 10204:2004, Metallic products - Types of inspection documents EN ISO 6507-1, Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1) EN ISO 6892-1, Metalli

36、c materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1) EN ISO 8493, Metallic materials - Tube - Drift-expanding test (ISO 8493) ISO 1553, Unalloyed copper containing not less than 99,90 % of copper - Determination of copper content - Electrolytic method ISO 4741, Cop

37、per and copper alloys - Determination of phosphorus content - Molybdovanadate spectrometric method BS EN 12735-1:2016EN 12735-1:2016 (E) 8 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 seamless round tube hollow semi-finished product, circu

38、lar in cross-section having a uniform wall thickness, which at all stages of production has a continuous periphery 3.2 coil winding in which the turns either are arranged into layers parallel to its axis such that successive turns in a given layer are next to one another (LWC Level Wound Coil) or ar

39、e spirally arranged (SWC Spiral Wound Coil) 3.3 mean diameter arithmetical mean of the maximum and minimum outside diameters through the same cross-section of the tube SOURCE: EN 1057:2006+A1:2010, definition 3.5 3.4 deviation from circular form difference between the maximum and minimum outside dia

40、meters measured at any one cross-section of the tube SOURCE: EN 1057:2006+A1:2010, definition 3.6 3.5 deviation from concentricity half of the difference between the maximum and minimum wall thicknesses at the same cross-section of the tube SOURCE: EN 1057:2006+A1:2010, definition 3.7 3.6 production

41、 batch definite quantity of products of the same form, the same material condition and the same cross-sectional dimensions manufactured during the same production sequence under uniform conditions SOURCE: EN 1057:2006+A1:2010, definition 3.8 3.7 permanently marked marked in such a way that the marki

42、ng will remain readable up to the end of the life on the installation EXAMPLE Stamping, etching or engraving. SOURCE: EN 1057:2006+A1:2010, definition 3.9 BS EN 12735-1:2016EN 12735-1:2016 (E) 9 3.8 durably marked marked in such a way that the marking will remain readable up to the time of commissio

43、ning of the installation EXAMPLE Ink marking. SOURCE: EN 1057:2006+A1:2010, definition 3.10 4 Designations 4.1 Material 4.1.1 General The material is designated either by symbol or number (see 6.1). 4.1.2 Symbol The material symbol designation is based on the designation system given in ISO 1190-1.

44、4.1.3 Number The material number designation is in accordance with the system given in EN 1412. 4.2 Material condition For the purposes of this European Standard, the following designation, which is in accordance with the system given in EN 1173, applies for the material condition (see Table 3): R.

45、Material condition designated by the minimum value of tensile strength requirement for the product with mandatory tensile strength and elongation requirements. 4.3 Product The product designation provides a standardized pattern of designation from which a rapid and unequivocal description of a produ

46、ct is conveyed in communication. It provides mutual comprehension at the international level with regard to products which meet the requirements of the relevant European Standard. The product designation is no substitute for the full content of the standard. The product designation for products to t

47、his European Standard shall consist of: denomination (Tube); number of this European Standard (EN 12735-1); material designation, either symbol or number (see Table 1 and Table 2); material condition designation (see Table 3); nominal cross-sectional dimensions in millimetres: outside diameter wall

48、thickness (see Table 4). The derivation of a product designation is shown in the following example. BS EN 12735-1:2016EN 12735-1:2016 (E) 10 EXAMPLE Tube conforming to this European Standard, in material designated either Cu-DHP or CW024A, in material condition R290 (hard), nominal outside diameter

49、28 mm, nominal wall thickness 1,5 mm, will be designated as follows: Tube EN 12735-1 Cu-DHP R290 28 1,5 Denomination Number of this European Standard Material designation Material condition designation Nominal cross-sectional dimensions in millimetres 5 Ordering information In order to facilitate the enquiry, order and confirmation of order procedures between the purchaser and the supplier, the purchaser shall state on his enquiry and order the following information: a) qua