ECA EIA-60384-9-2014 Fixed Capacitors for Use in Electronic Equipment - Part 9 Sectional Specification - Fixed Capacitors of Ceramic Dielectric Class 2.pdf

《ECA EIA-60384-9-2014 Fixed Capacitors for Use in Electronic Equipment - Part 9 Sectional Specification - Fixed Capacitors of Ceramic Dielectric Class 2.pdf》由会员分享，可在线阅读，更多相关《ECA EIA-60384-9-2014 Fixed Capacitors for Use in Electronic Equipment - Part 9 Sectional Specification - Fixed Capacitors of Ceramic Dielectric Class 2.pdf（33页珍藏版）》请在麦多课文档分享上搜索。

1、 EIA STANDARD Fixed Capacitors for Use in Electronic Equipment Part 9: Sectional Specification Fixed Capacitors of Ceramic Dielectric, Class 2 EIA-60384-9 (IEC 60384-9:2005, IDT) October 2014 ANSI/EIA-60384-9-2014 Approved: October 6, 2014 EIA-60384-11 EIA-60384-9NOTICE EIA Engineering Standards and

2、 Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his partic

3、ular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of ECIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use

4、by those other than ECIA members, whether the standard is to be used either domestically or internationally. Standards and Publications are adopted by ECIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, ECIA does not assume any liability to any pat

5、ent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This EIA Standard is identical (IDT) with the International Standard IEC Publication 60384-9:2005: Fixed Capacitors for Use in Electronic Equipment Part 9: Sectional Specification Fixed Capacitors

6、of Ceramic Dielectric, Class 2. This document is the EIA Standard EIA-60384-9 2014: Fixed Capacitors for Use in Electronic Equipment Part 9: Sectional Specification Fixed Capacitors of Ceramic Dielectric, Class 2. The text, figures and tables of IEC 60384-9:2005 are used in this Standard with the co

7、nsent of the IEC and the American National Standards Institute (ANSI). These materials are subject to copyright claims of IEC and ECIA. No part of this publication may be reproduced in any form, including an electronic retrieval system, without the prior written permission of ECIA. All requests pert

8、aining to EIA-60384-9 2014: Fixed Capacitors for Use in Electronic Equipment Part 9: Sectional Specification Fixed Capacitors of Ceramic Dielectric, Class 2 should be submitted to ECIA at the address below. The IEC copyrighted material has been reproduced with permission from ANSI. The IEC Foreword

9、and Introduction are not part of the requirements of this standard but are included for information purposes only. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to

10、 establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 5282, formulated under the cognizance of the P-2.1 Committee on EIA National Ceramic Dielectric Capacitors Standards and given final approval b

11、y the Steering Committee for Passive Electronic Components Standards (S-1). Published by Electronic Components Industry Association 2014 Standards any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmenta

12、l organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on tech

13、nical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by I

14、EC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international unifo

15、rmity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5)

16、IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors

17、, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out

18、 of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn t

19、o the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60384-9 has been prepared by IEC technical committee 40: Capacitors and resistors for e

20、lectronic equipment. This third edition cancels and replaces the second edition published in 1988 and amendment 1 (2000). This third edition is a result of maintenance activities related to the previous edition. All changes that have been agreed upon can be categorized as minor revisions. The text o

21、f this standard is based on the following documents: FDIS Report on voting 40/1530/FDIS 40/1550/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. EIA-60384-9 Page 2 This publication has been drafted in accordance w

22、ith the ISO/IEC Directives, Part 2. IEC 60384 consists of the following parts, under the general title Fixed capacitors for use in electronic equipment: Part 1: Generic specification Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors Part 3:

23、Sectional specification: Fixed tantalum chip capacitors Part 4: Sectional specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte Part 5: Sectional specification: Fixed mica dielectric d.c. capacitors with a rated voltage not exceeding 3000 V Selection of methods of tes

24、t and general requirements Part 6: Sectional specification: Fixed metallized polycarbonate film dielectric d.c. capacitors Part 7: Sectional specification: Fixed polystyrene film dielectric metal foil d.c. capacitors Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 Pa

25、rt 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2 Part 11: Sectional specification: Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors Part 12: Sectional specification: Fixed polycarbonate film dielectric metal foil d.c. capacitors Part 13: Secti

26、onal specification: Fixed polypropylene film dielectric metal foil d.c. capacitors Part 14: Sectional specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid el

27、ectrolyte Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors Part 18: Sectional specification: Fixed aluminium electrolytic chip capacitors with so

28、lid and non-solid electrolyte Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric chip d.c. capacitors Part 20: Sectional specification: Fixed metallized polyphenylene sulfide film dielectric chip d.c. capacitors Part 21: Sectional specification: Fixed surfa

29、ce mount multilayer capacitors of ceramic dielectric, Class 1 Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 Part 23: Sectional specification: Fixed surface mount metallized polyethylene naphthalate film dielectric d.c. capacitors1Part 24:

30、Sectional specification Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte Part 25: Sectional specification Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte 1To be published. EIA-60384-9 Page 3 The QC number t

31、hat appears on the front cover of this publication is the specification number in the IECQ Quality Assessment System for Electronic Components. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under

32、“http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. EIA-60384-9 Page 4 FIXED CAPACITORS FOR USE IN ELEC

33、TRONIC EQUIPMENT Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2 1 General 1.1 Scope This part of IEC 60384 is applicable to fixed capacitors of ceramic dielectric with a defined temperature coefficient (dielectric Class 2), intended for use in electronic equipment,

34、including leadless capacitors but excluding fixed surface mount multilayer capacitors of ceramic dielectric.2Capacitors for electromagnetic interference suppression are not included, but are covered by IEC 60384-14. 1.2 Object The object of this standard is to prescribe preferred ratings and charact

35、eristics and to select from IEC 60384-1:1999, the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements prescribed in detail specifications referring to this sectional specifica

36、tion shall be of equal or higher performance level because lower performance levels are not permitted. 1.3 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the

37、 latest edition of the referenced document (including any amendments) applies. IEC 60063:1963, Preferred number series for resistors and capacitors Amendment No. 1 (1967) Amendment No. 2 (1977) IEC 60068-1, Environmental testing Part 1: General and guidance IEC 60384-1:1999, Fixed capacitors for use

38、 in electronic equipment Part 1: Generic specification. IEC 60410:1973, Sampling plans and procedures for inspection by attributes ISO 3:1973, Preferred numbers Series of preferred numbers 1.4 Information to be given in a detail specification Detail specifications shall be derived from the relevant

39、blank detail specification. Detail specifications shall not specify requirements inferior to those of the generic, sectional or blank detail specification. When more severe requirements are included, they shall be listed in 1.9 of the detail specification and indicated in the test schedules, for exa

40、mple by an asterisk. NOTE The information given in 1.4.1 may for convenience, be presented in tabular form. 2Which are covered by IEC 60384-22 (Class 2). EIA-60384-9 Page 5 The following information shall be given in each detail specification and the values quoted shall preferably be selected from t

41、hose given in the appropriate clause of this sectional specification. 1.4.1 Outline drawing and dimensions There shall be an illustration of the capacitor as an aid to easy recognition and for comparison of the capacitor with others. Dimensions and their associated tolerances, which affect interchan

42、geability and mounting, shall be given in the detail specification. All dimensions shall preferably be stated in millimetres, however when the original dimensions are given in inches, the converted metric dimensions in millimetres shall be added. Normally, the numerical values shall be given for the

43、 length of the body, the width and height of the body and the wire spacing, or for cylindrical types, the body diameter, and the length and diameter of the terminations. When necessary, for example when a number of items (capacitance values/voltage ranges) are covered by a detail specification, the

44、dimensions and their associated tolerances shall be placed in a table below the drawing. When the configuration is other than described above, the detail specification shall state such dimensional information as will adequately describe the capacitors. When the capacitor is not designed for use on p

45、rinted boards, this shall be clearly stated in the detail specification. 1.4.2 Mounting The detail specification shall specify the method of mounting to be applied for normal use and for the application of the vibration and the bump or shock tests. The capacitors shall be mounted by their normal mea

46、ns. The design of the capacitor may be such that special mounting fixtures are required in its use. In this case, the detail specification shall describe the mounting fixtures and they shall be used in the application of the vibration and bump or shock tests. 1.4.3 Ratings and characteristics The ra

47、tings and characteristics shall be in accordance with the relevant clauses of this specification, together with the following: 1.4.3.1 Rated capacitance range See 2.2.4.1 NOTE When products approved to the detail specification have different ranges, the following statement should be added: “The rang

48、e of values available in each voltage range is given in IEC QC 001005“. 1.4.3.2 Particular characteristics Additional characteristics may be listed, when they are considered necessary to specify adequately the component for design and application purposes. 1.4.3.3 Soldering The detail specification

49、shall prescribe the test methods, severities and requirements applicable for the solderability and the resistance to soldering heat tests. 1.4.4 Marking The detail specification shall specify the content of the marking on the capacitor and on the package. Deviations from 1.6 of this sectional specification, shall be specifically stated. EIA-60384-9 Page 6 1.5 Terms and definitions For the purposes of this document, the applicable terms and definitions of IEC 60384-1 and the following apply. 1.5.1 fixed capacitors of ceramic dielectric,