ECA EIA-60384-4-2017 Fixed Capacitors for Use in Electronic Equipment - Part 4 Sectional Specification C Fixed Aluminium Electrolytic Capacitors with Solid (MnO2) and Non-solid Ele.pdf

《ECA EIA-60384-4-2017 Fixed Capacitors for Use in Electronic Equipment - Part 4 Sectional Specification C Fixed Aluminium Electrolytic Capacitors with Solid (MnO2) and Non-solid Ele.pdf》由会员分享，可在线阅读，更多相关《ECA EIA-60384-4-2017 Fixed Capacitors for Use in Electronic Equipment - Part 4 Sectional Specification C Fixed Aluminium Electrolytic Capacitors with Solid (MnO2) and Non-solid Ele.pdf（46页珍藏版）》请在麦多课文档分享上搜索。

1、EIASTANDARDFixed Capacitors for Use in Electronic Equipment - Part 4: Sectional Specification Fixed Aluminium Electrolytic Capacitors with Solid (MnO2) and Non-solid ElectrolyteEIA-60384-4 (IEC 60384-4:2016, IDT) October 2017 Electronic Components Industry Association ANSI/EIA-60384-4-2017 Approved:

2、 October 11, 2017EIA-60384-4NOTICEEIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and

3、 obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of ECIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence o

4、f such Standards and Publications preclude their voluntary use by those other than ECIA members, whether the standard is to be used either domestically or internationally. Standards and Publications are adopted by ECIA in accordance with the American National Standards Institute (ANSI) patent policy

5、. By such action, ECIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This EIA Standard is identical (IDT) with the International Standard IEC Publication 60384-4:2016 Edition 5: Fixed Capacitors for Use

6、in Electronic Equipment - Part 4: Sectional Specification Fixed Aluminium Electrolytic Capacitors with Solid (MnO2) and Non-solid Electrolyte. This document is the EIA Standard EIA-60384-4-2017: Fixed Capacitors for Use in Electronic Equipment - Part 4: Sectional Specification Fixed Aluminium Electr

7、olytic Capacitors with Solid (MnO2) and Non-solid Electrolyte.The text, figures and tables of IEC 60384-4:2016 are used in this Standard with the consent of the IEC and the American National Standards Institute (ANSI). The IEC copyrighted material has been reproduced with permission from ANSI. The I

8、EC Foreword and Introduction are not part of the requirements of this standard but are included for information purposes only. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this

9、 Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 5390.02, formulated under the cognizance of the Steering Committee for Passive Electronic Components Standards (S-1).Published by E

10、lectronic Components Industry Association 2017 Engineering Department 2214 Rock Hill Road, Suite 265 Herndon, VA 20170 PLEASE ! DONT VIOLATE THE LAW!This document is copyrighted by the ECIA and may not be reproduced without permission. Organizations may obtain permission to reproduce a limited numbe

11、r of copies through entering into a license agreement. For information, contact: IHS Markit 15 Inverness Way East Englewood, CO 80112-5704 or call USA and Canada (1-877-413-5186), International (303-397-7956) CONTENTS FOREWORD 51 General . 11.1 Scope . 11.2 Object 11.3 Normative references . 11.4 In

12、formation to be given in a detail specification. 21.4.1 General . 21.4.2 Outline drawing and dimensions 21.4.3 Mounting . 21.4.4 Ratings and characteristics . 21.4.5 Marking . 31.5 Terms and definitions . 31.6 Marking 31.6.1 General . 31.6.2 Information for marking . 31.6.3 Marking on capacitors . 4

13、1.6.4 Marking on packaging . 42 Preferred ratings and characteristics . 42.1 Preferred characteristics . 42.2 Preferred values of ratings . 42.2.1 Nominal capacitance (CN) . 42.2.2 Tolerance on nominal capacitance 52.2.3 Rated voltage (UR) 52.2.4 Category voltage (UC) . 52.2.5 Ripple voltage . 52.2.

14、6 Reverse voltage 52.2.7 Surge voltage ratio 52.2.8 Rated ripple current. 53 Quality assessment procedures . 63.1 Primary stage of manufacture . 63.2 Structurally similar components 63.3 Certified test records of released lots . 63.4 Qualification approval (QA) procedures 63.4.1 General . 63.4.2 Qua

15、lification approval on the basis of the fixed sample size procedure 63.4.3 Tests . 73.5 Quality conformance inspection 193.5.1 Formation of inspection lots 193.5.2 Test schedule 193.5.3 Delayed delivery 193.5.4 Assessment levels. 194 Test and measurement procedures . 204.1 Pre-conditioning (for non-

16、solid electrolyte capacitors only) . 204.2 Visual examination and check of dimensions 214.2.1 General . 214.2.2 Visual examination and check of dimensions . 214.2.3 Requirements 214.3 Electrical tests 214.3.1 Leakage current 214.3.2 Capacitance 214.3.3 Tangent of loss angle (tan ) or equivalent seri

17、es resistance (ESR) 224.3.4 Impedance (if required) . 224.3.5 Insulation resistance of the external insulation (if required) . 234.3.6 Voltage proof of the external insulation (if required) 234.4 Robustness of terminations 244.4.1 General . 244.4.2 Initial inspection 244.4.3 Final inspection . 244.5

18、 Resistance to soldering heat 244.5.1 General . 244.5.2 Test conditions 244.5.3 Recovery . 244.5.4 Final inspection and requirements . 244.6 Solderability . 244.6.1 General . 244.6.2 Test conditions 244.6.3 Final inspection . 254.7 Rapid change of temperature 254.7.1 General . 254.7.2 Initial inspec

19、tion 254.7.3 Test conditions 254.7.4 Recovery . 254.7.5 Final inspections and requirements . 254.8 Vibration . 254.8.1 General . 254.8.2 Test conditions 254.8.3 Final inspections and requirements . 264.9 Bump (if required) . 264.9.1 General . 264.9.2 Test conditions 264.9.3 Final inspections and req

20、uirements . 264.10 Shock (if required) 264.10.1 General . 264.10.2 Test conditions 264.10.3 Final inspections and requirements . 274.11 Climatic sequence 274.11.1 General . 274.11.2 Initial inspection 274.11.3 Dry heat 274.11.4 Damp heat, cyclic, test Db, first cycle 274.11.5 Cold 274.11.6 Low air p

21、ressure (if required) 274.11.7 Damp heat, cyclic, test Db, remaining cycles . 284.11.8 Sealing (if required) . 284.11.9 Final inspections and requirements . 284.12 Damp heat, steady state . 284.12.1 General . 284.12.2 Initial inspection 284.12.3 Test conditions 284.12.4 Recovery . 284.12.5 Final ins

22、pections and requirements . 284.13 Endurance 294.13.1 General . 294.13.2 Initial inspection 294.13.3 Test conditions 294.13.4 Recovery . 294.13.5 Final inspections and requirements . 294.14 Surge voltage . 294.14.1 General . 294.14.2 Initial inspection 294.14.3 Test conditions 304.14.4 Recovery . 30

23、4.14.5 Final inspections and requirements . 304.15 Reverse voltage (if required) 304.15.1 Initial inspection 304.15.2 Test conditions 304.15.3 Recovery . 314.15.4 Final inspections and requirements . 314.16 Pressure relief (if required) . 314.17 Storage at high temperature . 314.17.1 General . 314.1

24、7.2 Initial inspection 314.17.3 Test conditions 314.17.4 Recovery . 314.17.5 Final inspections and requirements . 314.18 Storage at low temperature (if required) . 314.18.1 General . 314.18.2 Initial inspection 314.18.3 Test conditions 314.18.4 Recovery . 314.18.5 Final inspections and requirements

25、. 324.19 Characteristics at high and low temperature . 324.19.1 General . 324.19.2 Inspections and requirements 324.20 Charge and discharge (if required) . 324.20.1 General . 324.20.2 Initial inspection 324.20.3 Test conditions 324.20.4 Final inspections and requirements . 324.21 High surge current

26、(if required) . 334.21.1 General . 334.21.2 Final inspections and requirements . 334.22 Voltage transient overload (if required) . 334.22.1 General . 334.22.2 Initial inspection 334.22.3 Final inspections and requirements . 33Bibliography . 34Table 1 Preferred values of tolerances 5Table 2 Sampling

27、plan for qualification approval, assessment level EZ 8Table 3 Test schedule for qualification approval (1 of 10) 9Table 4 Lot-by-lot inspection 20Table 5 Periodic inspection 20Table 6 Amplitude and acceleration options . 26Table 7 Preferred severities . 27INTERNATIONAL ELECTROTECHNICAL COMMISSION_ F

28、IXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 4: Sectional specification Fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national

29、electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Spe

30、cifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Intern

31、ational, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The form

32、al decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations fo

33、r international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4

34、) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shal

35、l be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certif

36、ication bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal inju

37、ry, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references c

38、ited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identif

39、ying any or all such patent rights. International Standard IEC 60384-4 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. This fifth edition cancels and replaces the fourth edition published in 2007. This edition constitutes a technical revision. This

40、 edition includes the following significant technical changes with respect to the previous edition: a) Revision of the structure in accordance with ISO/IEC Directives, Part 2:2011 (sixth edition) to the extent practicable, and harmonization between other similar kinds of documents; b) In addition, C

41、lause 4 and all the tables have been reviewed in order to prevent duplications and contradictions. The text of this standard is based on the following documents: FDIS Report on voting 40/2467/FDIS 40/2476/RVD Full information on the voting for the approval of this standard can be found in the report

42、 on voting indicated in the above table. The list of all parts of the IEC 60384 series, under the general title Fixed capacitors for use inelectronic equipment, can be found on the IEC website. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has dec

43、ided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amende

44、d. EIA-60384-4 Page 1 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 4: Sectional specification Fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte 1 General 1.1 Scope This part of IEC 60384 applies to fixed aluminium electrolytic capacitors with solid (MnO2) a

45、nd non-solid electrolyte primarily intended for d.c. applications for use in electronic equipment. It covers capacitors for long-life applications and capacitors for general-purpose applications. Capacitors for fixed surface mount aluminium electrolytic capacitors are not included but they are cover

46、ed by IEC 60384-18. Capacitors for special-purpose applications may need additional requirements. 1.2 Object The object of this standard is to prescribe preferred ratings and characteristics and to select from IEC 60384-1:2016 the appropriate quality assessment procedures, tests and measuring method

47、s and to give general performance requirements for this type of capacitor. Test severities and requirements prescribed in detail specifications referring to this sectional specification shall be of equal or higher performance level, because lower performance levels are not permitted. 1.3 Normative r

48、eferences The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applie

49、s. IEC 60063, Preferred number series for resistors and capacitors IEC 60068-1:2013, Environmental testing Part 1: General and guidance IEC 60068-2-54:2006, Environmental testing Part 2-54: Tests Test Ta: Solderability testing of electronic components by the wetting balance method IEC 60384-1:2016, Fixed capacitors for use in electronic equipment Part 1: Generic specificationIEC 60417, Graphical symbols for use on equipment IEC 61193-2:2007, Quality assessment system Part 2: Selection and use of sampling plans for inspection of ele