DLA A-A-59408-2004 COIL RF CHIP FIXED HIGH CURRENT SURFACE MOUNT《表面安装高电路固定芯片阻力系数线圈》.pdf

《DLA A-A-59408-2004 COIL RF CHIP FIXED HIGH CURRENT SURFACE MOUNT《表面安装高电路固定芯片阻力系数线圈》.pdf》由会员分享，可在线阅读，更多相关《DLA A-A-59408-2004 COIL RF CHIP FIXED HIGH CURRENT SURFACE MOUNT《表面安装高电路固定芯片阻力系数线圈》.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、INCH-POUND A-A-59408 18 February 2004 COMMERCIAL ITEM DESCRIPTION COIL, RF, CHIP, FIXED, HIGH CURRENT, SURFACE MOUNT The General Services Administration has authorized the use of this commercial item description (CID) for all federal agencies. 1. SCOPE. This CID covers the general requirements for a

2、 radio frequency coil. Coils covered by this CID are intended for commercial/industrial applications. 2. CLASSIFICATION. This CID uses a classification system which is included in the Part Identification Number (PIN) as shown in the following example (see 7.1). AA59408 - 001 K CID number Dash number

3、 (see table I) Inductance tolerance (see table II) 3. SALIENT CHARACTERISTICS. 3.1 Interface and physical dimensions. Coils supplied to this CID shall be as specified herein. (see figure 1). 3.2. Electrical characteristics. The electrical characteristics shall be as specified in table I. 3.3 Weight.

4、 The weight shall be no greater than 0.5 gram maximum. 3.4 Operating temperature range. The operating temperature range is 40C to +125C. 3.5 Temperature rise. DC current rating for a 20C rise. 3.6 Altitude. The maximum altitude is 70,000 feet. 3.7 Marking. Inductors supplied to this CID shall be mar

5、ked with the manufacturers standard commercial PIN. Beneficial comments recommendations, additions, deletions, clarifications, etc., and any data which may improve this document should be addressed to: Defense Supply Center, Columbus, ATTN: DSCC-VAT, Post Office Box 3990, Columbus, OH 43216-5000, or

6、 telephone (614) 692-0557, or facsimile (FAX) (614) 692-6939. AMSC N/A FSC 5950 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59408 2 Dimension INCHES MM A Max. B

7、 Max. C Max. D Ref. E F G H I J .071 .044 .040 .015 .030 .013 .034 .040 .025 .025 1.80 1.12 1.02 0.38 0.76 0.33 0.86 1.02 0.64 0.64 NOTES: 1. Dimensions are in Inches. 2. Metric equivalents are listed for general information only. FIGURE 1. Configuration and dimensions. Provided by IHSNot for Resale

8、No reproduction or networking permitted without license from IHS-,-,-A-A-59408 3 TABLE I. Electrical characteristics. 900 MHz 1.7 GHz CID dash number AA59408- Inductance(nH) Tolerance (%)Q Min L Typ Q Typ L Typ Q TypSRF Min (MHz) DCR Max (OHMS) 1/ IDCMAX (mA) 001 1.6 250 MHz 10, 5 24 1.67 49 1.65 63

9、 12,500 0.030 2.4 002 3.6 250 MHz 10, 5 24 3.65 70 3.75 90 5900 0.048 2.3 003 3.9 250 MHz 10, 5 25 3.74 70 3.90 90 5900 0.054 2.2 004 6.8 250 MHz 10, 5 35 6.72 70 7.10 75 5800 0.054 2.1 005 7.5 250 MHz 10, 5 38 7.33 70 7.90 68 3700 0.059 2.1 006 10 250 MHz 10, 5, 2 38 9.70 73 10.5 57 3700 0.071 2.0

10、007 12 250 MHz 10, 5, 2 38 12.3 68 14.5 41 3000 0.075 2.0 008 15 250 MHz 10, 5, 2 38 15.5 65 17.6 40 2800 0.080 1.9 009 18 250 MHz 10, 5, 2 40 19.5 62 25.0 40 2800 0.099 1.9 010 22 250 MHz 10, 5, 2 42 24.0 61 31.5 26 2400 0.099 1.8 011 24 250 MHz 10, 5, 2 42 25.8 55 35.0 21 2400 0.105 1.8 1/ DC curr

11、ent rating for a 20C rise. TABLE II. Inductance tolerances Code Tolerance (percentage) K M N 2 5 10 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation

12、 (FAR). 5. PRODUCT CONFORMANCE PROVISIONS 5.1 Product conformance. The products provided shall meet the salient characteristics of this CID, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial m

13、arket. The Government reserves the right to require proof of such conformance. 5.2 Market acceptance. The following market acceptance criteria are necessary to document the quality of the product to be provided under this CID: a. The company producing the item must have been producing a product meet

14、ing the requirements of this CID for at least 2 years. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59408 4 b. The company must have sold 1,000 units meeting this CID in the commercial marketplace over the past 2 years. 6. PACKAGING. Preservat

15、ion, packing, and marking shall be as specified in the contract or order. 7. NOTES. 7.1 PIN. The PIN should be used for Government purposes to buy commercial products to this CID. See section 2 for PIN format example. 7.2 Commercial and Government Entity (CAGE) code. For ordering purposes, inventory

16、 control, and submission of these inductors to DSCC under the Military Parts Control Advisory Group (MPCAG) evaluation program, CAGE code 58536 should be used. 7.3 Ordering data. The contract or order should specify the following: a. CID document number, revision, and CID PIN. b. Product conformance

17、 provisions. c. Packaging requirements. 7.4 Commercial products. As part of the market analysis and research effort, this CID was coordinated with the following manufacturers of commercial products. At the time of CID preparation and coordination, these manufacturers were known to have commercial pr

18、oducts that would meet the requirements of this CID. (NOTE: This information should not be considered as a list of approved manufacturers or be used to restrict procurement to only the manufacturers shown.) MFRs CAGE MFRs name and address 02113 Coilcraft Inc 1102 Silver Lake Road Cary, Illinois 6001

19、3-1658 Phone number (847) 639-2361 Uniform Resource Locator (URL): Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59408 5 7.5 Part number (P/N) supersession data. This CID supersedes the following manufacturers P/Ns as shown. This information i

20、s being provided to assist in reducing proliferation in the government inventory system. TABLE III. P/N supersession data. 1/ CID dash number (see table I) AA59408- Vendor commercial PIN 2/ CAGE 02113 001* 0603HC-1N6*B* 002* 0603HC-3N6*B* 003* 0603HC-3N9*B* 004* 0603HC-6N8*B* 005* 0603HC-7N5*B* 006*

21、 0603HC-10N*B* 007* 0603HC-12N*B* 008* 0603HC-15N*B* 009* 0603HC-18N*B* 010* 0603HC-22N*B* 011* 0603HC-24N*B* 1/ When “*“ is used for coded values, its the contractors responsibility to select those options allowed by the CID. 2/ The manufacturers P/N shall not be used for procurement to the require

22、ments of this CID. At the time of preparation of this CID, the aforementioned commercial products were reviewed and could be replaced by the CID P/N shown. 7.6 Government users. To acquire information on obtaining these coils from the Government inventory system, contact Defense Supply Center, Colum

23、bus, ATTN: DSCC-CPAA, Post Office Box 3990, Columbus, OH 43216-5000, or telephone (614) 692-7741. MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: GSA - 7FXE Custodians: Navy - EC Preparing Activity: DLA - CC Project 5950-1161 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-