DLA A-A-55812-1995 CABLE ASSEMBLY (TYPE I) ELECTRONIC TEST EQUIPMENT (2 POLES 3 WIRES 125 VOLTS 13 AMPERES 50 OR 60 HERTZ) GROUNDING PLUG CONNECTOR [Superseded DLA MIL-C-28777 5 B .pdf

《DLA A-A-55812-1995 CABLE ASSEMBLY (TYPE I) ELECTRONIC TEST EQUIPMENT (2 POLES 3 WIRES 125 VOLTS 13 AMPERES 50 OR 60 HERTZ) GROUNDING PLUG CONNECTOR [Superseded DLA MIL-C-28777 5 B .pdf》由会员分享，可在线阅读，更多相关《DLA A-A-55812-1995 CABLE ASSEMBLY (TYPE I) ELECTRONIC TEST EQUIPMENT (2 POLES 3 WIRES 125 VOLTS 13 AMPERES 50 OR 60 HERTZ) GROUNDING PLUG CONNECTOR [Superseded DLA MIL-C-28777 5 B .pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、 A-A-55812 = 9999974 O171458 bo1 W METRIC 13 Novaber 1995 SUPERSEDING 3 April 1978 A-A-55812 - MIL-C-28777/5B COMMERCIAL ITEM DESCRIPTION CABLE ASSEMBLY, (TYPE I), ELECTRONIC TEST EQUIPMENT, (2 POLES, 3 WIRES, 125 VOLTS, 13 AMPERFS, 50 OR 60 HERTZ), GROUNDING PLUG CONNECTOR The General Services Admi

2、nistration has authorized the use of this commercial item description as a replacement for MIL-C-28777/5 for all federal agencies. 1. SCOPE. 1.1 Smpe. This commercial item description covers the requbements for a cable assembly, (type I), electronic test equipment, (2 poles, 3 wires, 125 volts, 13 a

3、mperes, 50 or 60 Hertz), grounding plug connector, also commonly known as a 125 volt power supply cord. 1.2 Intended use . .This cable assembly is to be used with equipment designed specifically for military use. 2. SALIENT CHARACTEFUSTICS. 2.1 Requirements . The cable assembly shall provide for the

4、 transmission of 125 volt, 13 ampere, 50 or 60 hertz ac power and shall be configured in accordance with figure 1. The cable shal meet the requirements of UL 62 for a class 43, AWG 16, SJT cable rated at 60C (140F). Unless otherwise specified (see 6.1), the cable shall be unsliielded. The cable jack

5、et shall be marked in accordance with section 71 of UL 62. The plug connector shall be molded to the jacket in accordance with section 56 of .UL 817 and shall conform to NEMA WD-1 and figure 5-15 of NEMA WD-6. The equipment end of the cable wires shall be stripped of the cable jacket not less than 6

6、9.85 mm (2-3/4 in.) and not greater than 82.55 mm (3-1/4 in.). Unless otherwise specified (see 6.1), the individual wires shall be stripped of 12.7 mm (1/2 in.) of insulation and shall be solder tinned. Unless otherwise specified (see 6.1), the length of the cord shall not be less than 2,360 mm (93

7、in.) and not greater than 3,000 mm (118 in.). Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any other data which may improve this document should be sent to: Defense Supply Center Richmond, ATTN: DSCR-VCA, 8000 Jefferson Davis Highway, Richmond, VA 23297-5610.

8、AMSC N/A FSC 6150 DISTRIBUTION STAT EMENT A . Approved for public release; distribution is unlimited. Licensed by Information Handling ServicesA-A-558 12 76.20 +I- 6.35 mm NEMA 5-15P - ! -1 I -I iLSJT v specific requirements. FIGURE 1. Cable assembly 3. REGULATORY REQUIREMENTS. 3.1 Recycled. reco ve

9、red or en viro-lv Dreferable maw . Recycled, recovered or environmentally preferable materials should be used to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements and promotes economically advantageous life cycle costs. 3.2 Environm

10、enta 1 protection. The cable assembly shall meet all applicable Environmentai Protection Agency Code of Regulation (CFR) in effect on the date of the contract. These regulations apply to the emission of material hazardous to the environment or the operators health and shall be met during manufacturi

11、ng, service, transportation, storage and operation. 4. QUALITY ASSURANCE PROVISIONS. 4.1 Product certdkum * . laboratory for compliance with the requirements of UL 817. The product shall have been certified by a ti011y recognized testing 4.2 Contra ctor cert ificah. The contractor shall certify and

12、maintain substantiating evidence that the product offered meets the salient characteristics of this comercial item description, and that the product conforms to the producers own drawings, specifications, and quality assurance practices, and is the same product offered for sale in the commercial mar

13、ketplace. The government reserves the right to require proof of such conformance prior to first delivery, and thereafter, as may be otherwise provided under the provisions of the contract. 4.3 Wt accept;ihilitJr * . The item offered must have been sold to the government or commercial market. 5. PACK

14、AGING. Unless otherwise specified (see 6.1), preservation, packing and marking shall be as specified in the contract or order. 2 Licensed by Information Handling Services A-A-SSL2 = 9999974 0171460 2bT A-A-55 8 12 6. NOTES. 6.1 . Acquisition documents must specify the following: a. Title, number, an

15、d date of this commercial item description. b. Quantity required. c. Shielded cable, if required (see 2.1). d. Insulation (unstripped), if requested (see 2.1). e. Cable length, if different (see 2.1). f. Packaging requirements, if different (see 5). 6.2 Part identification number PIN) . government p

16、urposes and does not constitute a requirement for the contractor: The following part identification numbering procedure is for CID AA55812 supercedes M28777/5-1 6.3 Source of documents. 6.3.1 Copies of Military and Federal documents may be obtained from the Superintendent of Documents, U.S. Governme

17、nt Printing Office, Washington, D.C. 20402. 6.3.2 Copies of industry documents/standards referenced in this commerxiai item description may be obtained from the following addresses: 6.3.2.1 National Electrical Manufacturers Association (NEMA) 2101 L Street, Washington, D.C. 20037. 6.3.2.2 Underwrite

18、rs Laboratories Inc. (UL) 1285 Walt Whitman Road, Melville, NY 11747. 6.3.2.3 American National Standards Institute Inc. (ANST) 1430 Broadway, New York, NY 10018. 6.4 National stock numbers (NSNs) . The following is a list of NSNs assigned which correspond to this CID. This list may not be indicativ

19、e of ail possible NSNs associated with this CID, NSNs: 6 150-0 1- 153-801 3,6 150-0 1-261-4642, 6 150-00-565-599 1 6.5 Known sources . commercial item description: The following is a list of sources known to meet the requirements of this a. Belden Wire & Cable Company, P.O. Box 1980, Richmond, IN 47

20、375 b. The Bergquist Company, 5300 Mina Indl, Minneapolis, MN 55439 c. LZR Electronics Inc., 8051 Cessna Ave., Gaithersburg, MD 20879 d. Rodale Technical Sales Inc., 577 Main Street, Islip, NY 11751 3 Licensed by Information Handling Services A-A-55812 D 9999974 0171461 1Tb A-A-55812 MILITARY INTERESTS: Custodians Air Force - 99 Reviewers Navy -SH Air Force - 11, 85 Army - ME DLA - ES CIVIL AGENCY COORDINATING AClWITY: GSA - 7FXE - PREPARING ACTMTY: DLA - GS Project 6150 - 0250 4 Licensed by Information Handling Services