DLA A-A-50446 A-2011 LAMP INCANDESCENT S-6 CANDELABRA SCREW.pdf

《DLA A-A-50446 A-2011 LAMP INCANDESCENT S-6 CANDELABRA SCREW.pdf》由会员分享，可在线阅读，更多相关《DLA A-A-50446 A-2011 LAMP INCANDESCENT S-6 CANDELABRA SCREW.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data that may improve this document should be sent to: STDZNMGTdla.mil or Defense Logistics Agency Aviation VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-5616. Since contact information can change, you m

2、ay want to verify the currency of this address information using the ASSIST database at https:/assist.daps.dla.mil/. FSC 6240 INCH-POUND A-A-50446A 5 July 2011 SUPERSEDING A-A-50446 15 January 1992 COMMERCIAL ITEM DESCRIPTION LAMP, INCANDESCENT, S-6, CANDELABRA SCREW The General Services Administrat

3、ion has authorized the use of this commercial item description for all federal agencies. 1. SCOPE. This commercial item description (CID) covers S-6 incandescent lamps with a candelabra screw base. These lamps can be identified by the industry numbers specified in the notes section herein. 2. SALIEN

4、T CHARACTERISTICS 2.1 Physical characteristics. The lamps shall conform to figure 1 and the following physical characteristics: Bulb designation S-6 Bulb finsh Clear Base designation Candelabra screw Filament type (See functional characteristics) Dimensions (See figure 1) Provided by IHSNot for Resa

5、leNo reproduction or networking permitted without license from IHS-,-,-A-A-50446A 2 FIGURE 1. Lamp dimensions (inches). 2.2 Functional characteristics. The lamps shall conform to the functional characteristics of table I. TABLE I. Functional characteristics. CID part number Watts Volts Filament type

6、 Lumen output(approx) Life hours (approx) A50446-1 10 250 C-7A 66 1500 A50446-2 6 120 C-7A 41 1500 A50446-3 6 155 C-7A 38 1500 A50446-4 6 125 C-7A 41 1500 3. REGULATORY REQUIREMENTS 3.1 Recovered materials. The offeror/contractor is encouraged to use recovered materials to the maximum extent practic

7、able, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4. PRODUCT CONFORMANCE PROVISIONS 4.1 Product conformance. The products provided shall meet the salient characteristics of this CID, conform to the producers own drawings, specifications, standards, and quality as

8、surance practices, and be the same product offered for sale in the commercial marketplace. The government reserves the right to require proof of such conformance. 4.2 Market acceptability. The products offered must have been previously sold either to the government or on the commercial market. Provi

9、ded by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50446A 3 5. PACKAGING 5.1 Preservation, packing, and marking. Preservation, packing, and marking shall be as specified in the acquisition order (see 6.2(b). 6. NOTES 6.1 Source of document. 6.1.1 FAR. Th

10、e FAR may be obtained from the Superintendent of Documents, P.O. Box 371954, Pittsburgh, PA 15250-7954. Electronic copies may be obtained from https:/www.acquisition.gov/far/. 6.2 Ordering data. The acquisition order should specify the following information: a. CID document number, revision, and CID

11、 part number. b. Preservation, packing, and marking (see 5.1). 6.3 Subject term (key word) listing. Bulb Filament 6.4 Cross-reference data. Table II contains cross-reference data for the part number information for this CID. TABLE II. Cross reference to specification-based part numbers. CID part num

12、berMS part numberIndustry number A50446-1 MS15579-3 10S6/10 (250) A50446-2 MS15579-4 6S6 (120) A50446-3 MS15579-5 6S6 (155) A50446-4 MS15579-6 6S6 (125) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50446A 4 MILITARY INTERESTS: CIVIL AGENCY COO

13、RDINATING ACTIVITY:Custodians: GSA - FAS Army - CR4 Navy - SH Air Force - 99 DLA - GS Review Activity: Air Force - 71 Preparing Activity: DLA - GS2 (Project 6240-2011-002) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST database at https:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-