ARMY MIL-STD-406-1957 VISUAL INSPECTION STANDARDS FOR TERNE PLATE CANS AND STEEL BOXES USED IN SMALL ARMS AMMUNITION PACKAGING《轻武器弹药包装使用的镀铅锡合金薄钢板箱和钢铁箱的视觉检验标准》.pdf
《ARMY MIL-STD-406-1957 VISUAL INSPECTION STANDARDS FOR TERNE PLATE CANS AND STEEL BOXES USED IN SMALL ARMS AMMUNITION PACKAGING《轻武器弹药包装使用的镀铅锡合金薄钢板箱和钢铁箱的视觉检验标准》.pdf》由会员分享,可在线阅读,更多相关《ARMY MIL-STD-406-1957 VISUAL INSPECTION STANDARDS FOR TERNE PLATE CANS AND STEEL BOXES USED IN SMALL ARMS AMMUNITION PACKAGING《轻武器弹药包装使用的镀铅锡合金薄钢板箱和钢铁箱的视觉检验标准》.pdf(56页珍藏版)》请在麦多课文档分享上搜索。
1、 MIL-STD-40b 1 m 9799911 0069937 4 m 5-8t-Q3 M I L-STD-406 I February 1957 MILITARY STANDARD VISUAL INSPECTION STANDARDS FOR TERNE PLATE CANS AND STEEL BOXES USED IN SMALL ARMS AMMUNITION PACKAGING Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL
2、-STD-406 1 7797713 00b7438 b M Mll-STD-406 1 February 1957 OFFICE OF THE ASSISTANT SECRETARY OF DEFENSE WASHINGTON 25, D. C. Supply and Logistics Visual Inspection Staiidarcls for Terne plate. Cans and Steel Boxes Used in Small Arms Ammunition Packaging M1GSTD-406 1. This standard has been approved
3、by the Department of Defense and is mandatory for use by the Depart.ments of the Army, the Kavy, and the Air Force, effective 1 March 1957. 2. In accordance with established procedure, the Standardization Division has designated the Ordnance Corps, the Bureau of Ordnance, and the Air Force, respecti
4、vely, as Army-Nauy-Air Force custodians of this standard. 3. Recommended corrections, additions, or deletions should be addressed to the Standardiza- tion Division, Office of the Assistant Secretary of Defense (Supply and Logistics), Washington 25, D. C. Provided by IHSNot for ResaleNo reproduction
5、or networking permitted without license from IHS-,-,-MlL-STD-406 1 Februury 2957 FOREWORD This sta.ndard vas prepared under the direction of the Office, Chief of Ordnance, to be used to supplement specifications for steel boxes and terne plate cans used in the packaging of small-arms ammunition. It
6、replaces the following publications on the same subject: ORD-SIP-3327, 1 April 1954, and ORDSIP-3327, Amendment 1, 1 November 1955. This publication serves to create a military standard which evaluates and illustrates a practical majority of defects assembled as a result of extensive surveys coverin
7、g box, can and small arms ammunition manufacturing facilities. The format used retains most of the features of the formats of the publications it replaces because experience has proued that the numbering of illustrations to conform to the numbering of visual defects in the applicable detail specific
8、ations, special treatment of indexes and specialized grouping have served to facilitate inspection, training, and general us0. iii Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-406 1 m 7979711 0067440 4 m M IL-STD406 1 February 1957 CONTENT
9、S I. 1.1 1.2 2. 2.1 3. 3.1 3.2 3.2.1 3.2.2 4. 4.1 5. 5.1 5.1.1 SCOPE AND PURPOSE Scope Purpose REFERENCED DOCUMENTS Standards DEFINITIONS General Specific Permissible defect, Incidental defect GENERAL REQUIREMENTS DETAIL REQUIREMENTS Defect grouping General Classification V Provided by IHSNot for Re
10、saleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-406 2 M 7777723 0067442 b M 1. SCOPE AND PURPOSE 1.1 Scope. This standard provides proce- dures for determining and evaluating defects in steel bones and terne plate cans used in the packaging of small-arms ammunition a
11、nd the standard shall be used as a supplement to pertinent specifications. 1.2 Purpose. The purpose of this standard is to- a. Create standardization of defect nomen- clature and establish the limits of defectiveness for steel box and terne plate can acceptance inspection at vendors plants, and rece
12、iving inspec- tion at ammunition facilities. b. Provide visual defect standards for use in connection with acceptance inspec- tion of packed ammunition. c. Serve as a visual aid in the training of personnel engaged in the manufacture and inspection of bones and cans. d. Provide visual standards to b
13、e used as a guide in the evaluation of the resist- ance to corrosion of surface treated, painted steel boxes. 2. REFERENCED DOCUMENTS 2.1 Standards. MIL-STD-105-Sampling Procedures and Tables for Inspection by Attributes. 3. DEFINITIONS 3.1 General. Dehitionsof StandardMIG STD-105 are applicable. 3.
14、2 Specific. For the purpose of this stand- ard the following definitions shall apply: MIL-STD-406 1 February 1957 3.2.1 Permissible deject. A condition which, though no desirable from an appearance stand- point, may be permitted for reasons of economy, 3.2.2 Identul deject. A condition least desirab
15、le from an appearance standpoint, and the frequency of occurrence of boxes and cans having such defects is limited for acceptable lots by means of an Acceptable Quality Level. 4. GENERAL REQUIREMENTS 4.1 General. The descriptions and defini- tions of defects established in this standard are those co
16、mmonly occurring. Any other defects not listed, present in the lot, shall be reported. If, in the opinion of the Government inspector, the other defects be serious, complete informa- tion, recommendations and request for disposi- tion shall be submitted through proper channels. 5. DETAIL REQUIREMENT
17、S 5.1 Classification. 5.1.1 Deject grouping. For convenience in referencing, the defect. list,s, defect photographs, and color tolerances are grouped as follows: Page Boxes, Ammunition, Cal. .30, MlSAl, and Cal. .50, M2A1, List of Defects _-_ 2-3 Boxes, Ammunition, Cal. .30, M19A1, and Cal. .50, h.1
18、281, Defect Photographs _ 4 thru 30 Boxes, Ammunition, Cal. .30, AM19Al, and Cal. .50, h12A1: Rust Tolerances (After Corrosion Resist- ance Test) _ 31 thru 34 Color Tolerances _ 35 List of Defects _ 36 Defect Photographs _ 37 thru 51 Cans, Ammunition, Universal, M20 and M21, Cans, Ammunition, Univer
19、sal, h120 and M21, 1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-406 1 February 1957 LIST OF DEFECTS Boxes, Ammunition, Cal. .30, M19A1, and Cal. .50, M2A1 5 5 5 5 6 6 6 6 7 7 8 8 8 8 9 9 9 9 9 9 10 10 10 10 Provided by IHSNot for ResaleN
20、o reproduction or networking permitted without license from IHS-,-,-MIL-STD-406 BL m 77779LL 0067443 T MIL-STD-406 1 February 1957 Pa ge(s) 17 17 17 17 18 18 19 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-486 1 February 1957 BOXES, AMMU
21、NITION, CAL. 30, Ml9a.r AND CAL. .SO, MnAi No. I. Incomplete Manufactura Defect Perfect 1-A. Ineomplete Latch-Major i-B. Cover Emboss and/or Embossed Stop Missing-Major I-C. Hinge Pin Missing-Major 1-8. Gasket Retainer Improperly Flanged-Major 4 Provided by IHSNot for ResaleNo reproduction or networ
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ARMYMILSTD4061957VISUALINSPECTIONSTANDARDSFORTERNEPLATECANSANDSTEELBOXESUSEDINSMALLARMSAMMUNITIONPACKAGING
链接地址:http://www.mydoc123.com/p-448402.html