BS PD ISO TS 13399-304-2016 Cutting tool data representation and exchange Creation and exchange of 3D models Solid milling cutters with arbor hole《切削工具数据的表示和交换 三维模型的创建和交换 带有心轴孔的整体铣刀》.pdf

《BS PD ISO TS 13399-304-2016 Cutting tool data representation and exchange Creation and exchange of 3D models Solid milling cutters with arbor hole《切削工具数据的表示和交换 三维模型的创建和交换 带有心轴孔的整体铣刀》.pdf》由会员分享，可在线阅读，更多相关《BS PD ISO TS 13399-304-2016 Cutting tool data representation and exchange Creation and exchange of 3D models Solid milling cutters with arbor hole《切削工具数据的表示和交换 三维模型的创建和交换 带有心轴孔的整体铣刀》.pdf（46页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards Publication PD ISO/TS 13399-304:2016 Cutting tool data representation and exchange Part 304: Creation and exchange of 3D models Solid milling cutters with arbor holePD ISO/TS 13399-304:2016 PUBLISHED DOCUMENT National foreword This Published Document is the UK implementation of ISO/TS

2、13399-304:2016. The UK participation in its preparation was entrusted to Technical Committee MTE/18, Tools tips and inserts for cutting applications. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all th

3、e necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016 ISBN 978 0 580 92389 0 ICS 25.100.01; 35.240.50 Compliance with a British Standard cannot confer immunity from legal obligations. T

4、his Published Document was published under the authority of the Standards Policy and Strategy Committee on 29 February 2016. Amendments issued since publication Date Text affectedPD ISO/TS 13399-304:2016 ISO 2016 Cutting tool data representation and exchange Part 304: Creation and exchange of 3D mod

5、els Solid milling cutters with arbor hole Reprsentation et change des donnes relatives aux outils coupants Partie 304: Cration et change de modles 3D Fraises monobloc trou central TECHNICAL SPECIFICATION ISO/TS 13399-304 Reference number ISO/TS 13399-304:2016(E) First edition 2016-02-01PD ISO/TS 133

6、99-304:2016ISO/TS 13399-304:2016(E)ii ISO 2016 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2016, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanica

7、l, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switz

8、erland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.orgPD ISO/TS 13399-304:2016ISO/TS 13399-304:2016(E)Foreword v Introduction vii 1 Scope . 1 2 Normative references 1 3 Starting elements, coordinate systems, planes 2 3.1 General . 2 3.2 Reference system 2 3.3 Coordinate syste

9、m at the cutting part 3 3.4 Planes 3 3.5 Cutting reference point (CRP) 4 4 Design of the model . 5 4.1 Necessary properties for the connection interface feature 5 5 Plain milling cutter 6 5.1 General . 6 5.2 Necessary properties . 6 5.3 Geometry of the non-cutting part inclusive of the connection 7

10、5.4 Geometry of the cutting part . 9 5.5 Plain milling cutter, complete . 9 6 Shell mill 9 6.1 General . 9 6.2 Necessary properties 10 6.3 Geometry of the non-cutting part inclusive of the connection .10 6.4 Geometry of the cutting part 10 6.5 Shell mill, complete 10 7 Thread milling cutter 11 7.1 G

11、eneral 11 7.2 Necessary properties 11 7.3 Geometry of the non-cutting part inclusive of the connection .12 7.4 Geometry of the cutting part 12 7.5 Thread milling cutter, complete 12 8 Slotting cutter .12 8.1 General 12 8.2 Necessary properties 13 8.3 Geometry of the non-cutting part inclusive of the

12、 connection .13 8.4 Geometry of the cutting part 13 8.5 Slotting cutter, complete 14 9 P oint ed pr ofile slotting cutt er .14 9.1 General 14 9.2 Necessary properties 15 9.3 Geometry of the non-cutting part inclusive of the connection .15 9.4 Geometry of the cutting part 16 9.5 Pointed profile slott

13、ing cutter .16 10 Flatt ed pr ofile slotting cutt er .16 10.1 General 16 10.2 Necessary properties 17 10.3 Geometry of the non-cutting part inclusive of the connection .18 10.4 Geometry of the cutting part 18 10.5 Flatted profile slotting cutter, complete .18 11 C onca v e pr ofile cutt er 18 11.1 G

14、eneral 18 ISO 2016 All rights reserved iii Contents PagePD ISO/TS 13399-304:2016ISO/TS 13399-304:2016(E)11.2 Necessary properties 19 11.3 Geometry of the non-cutting part inclusive of the connection .19 11.4 Geometry of the cutting part 20 11.5 Concave profile cutter, complete 20 12 C on v e x pr of

15、ile cutt er .20 12.1 General 20 12.2 Necessary properties 21 12.3 Geometry of the non-cutting part inclusive of the connection .21 12.4 Geometry of the cutting part 21 12.5 Convex profile cutter, complete .21 13 Corner-rounding cutter 22 13.1 General 22 13.2 Necessary properties 23 13.3 Geometry of

16、the non-cutting part inclusive of the connection .23 13.4 Geometry of the cutting part 23 13.5 Corner-rounding cutter, complete .23 14 Angular milling cutter 24 14.1 General 24 14.2 Necessary properties 24 14.3 Geometry of the non-cutting part inclusive of the connection .25 14.4 Geometry of the cut

17、ting part 25 14.5 Angular milling cutter, complete 25 15 Angular pr ofile milling cutt er 26 15.1 General 26 15.2 Necessary properties 26 15.3 Geometry of the non-cutting part inclusive of the connection .27 15.4 Geometry of the cutting part 27 15.5 Angular profile milling cutter, complete 27 16 Saw

18、ing blade 27 16.1 General 27 16.2 Necessary properties 28 16.3 Geometry of the non-cutting part inclusive of the connection .28 16.4 Geometry of the cutting part 28 16.5 Sawing blade, complete 28 17 Design of details .29 17.1 Basics for modelling 29 17.2 Contact surfaces, driving features Orientatio

19、n .29 18 Attributes of surfaces Visualization of the model features 29 19 Structure of the design elements (tree of model) .29 20 Data exchange model 30 Annex A (informative) Information about nominal dimensions 32 Bibliography .33 iv ISO 2016 All rights reservedPD ISO/TS 13399-304:2016ISO/TS 13399-

20、304:2016(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject f

21、or which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on

22、 all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted

23、. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying a

24、ny or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of

25、users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplem

26、entary information The committee responsible for this document is ISO/TC 29, Small tools. ISO/TS 13399 consists of the following parts, under the general title Cutting tool data representation and exchange: Part 1: Overview, fundamental principles and general information model Part 2: Reference dict

27、ionary for the cutting items Technical Specification Part 3: Reference dictionary for tool items Technical Specification Part 4: Reference dictionary for adaptive items Technical Specification Part 5: Reference dictionary for assembly items Technical Specification Part 50: Reference dictionary for r

28、eference systems and common concepts Technical Specification Part 60: Reference dictionary for connection systems Technical Specification Part 80: Creation and exchange of 3D models Overview and principles Technical Specification Part 100: Definitions, principles and methods for reference dictionari

29、es Technical Specification Part 150: Usage guidelines Technical Specification Part 201: Creation and exchange of 3D models Regular inserts Technical Specification Part 202: Creation and exchange of 3D models Irregular inserts Technical Specification Part 203: Creation and exchange of 3D models Repla

30、ceable inserts for drilling Technical Specification Part 204: Creation and exchange of 3D models Inserts for reaming Technical Specification Part 301: Concept for the design of 3D models based on properties according to ISO/TS 133993: Modelling of thread cutting taps, thread forming taps and thread

31、cutting dies Technical Specification ISO 2016 All rights reserved vPD ISO/TS 13399-304:2016ISO/TS 13399-304:2016(E) Part 302: Concept for the design of 3D models based on properties according to ISO/TS 133993: Modelling of solid drills and countersinking tools Technical Specification Part 303: Conce

32、pt for the design of 3D models based on properties according to ISO/TS 133993: Modelling of end mills with solid cutting edges Technical Specification Part 304: Concept for the design of 3D models based on properties according to ISO/TS 133993: Modelling of milling cutters with arbor hole and solid

33、cutting edges Technical Specification Part 307: Creation and exchange of 3D models End mills for indexable inserts Technical Specification Part 308: Creation and exchange of 3D models Milling cutters with arbor hole for indexable inserts Technical Specification Part 309: Creation and exchange of 3D

34、models Tool holders for indexable inserts Technical Specification Part 311: Creation and exchange of 3D models Solid reamers Technical Specification Part 312: Creation and exchange of 3D models Reamers for indexable inserts Technical Specification Part 401: Creation and exchange of 3D models Convert

35、ing, extending and reducing adaptive items Technical Specification Part 405: Creation and exchange of 3D models Collets Technical Specification The following parts are under preparation: Part 70: Graphical data layout Layer settings for tool designs Technical Specification Part 71: Graphical data la

36、yout Creation of documents for the standardized data exchange Graphical product information Technical Specification Part 72: Creation of documents for the standardized data exchange Definition of properties for drawing header and their XML data exchange Technical Specification Part 305: Creation and

37、 exchange of 3D models Modular tooling systems with adjustable cartridges for boring Technical Specification Part 310: Creation and exchange of 3D models T urning tools with carbide tips Technical Specificationvi ISO 2016 All rights reservedPD ISO/TS 13399-304:2016ISO/TS 13399-304:2016(E) Introducti

38、on This part of ISO/TS 13399 defines the concept, the terms and the definitions on how to design simplified 3D models of milling cutters with arbor hole and non-indexable cutting edges that can be used for NC- programming, simulation of the manufacturing processes and the determination of collision

39、within machining processes. It is not intended to standardize the design of the cutting tool itself. A cutting tool is used in a machine to remove material from a workpiece by a shearing action at the cutting edges of the tool. Cutting tool data that can be described by ISO/TS 13399 (all parts) incl

40、ude, but are not limited to, everything between the workpiece and the machine tool. Information about inserts, solid tools, assembled tools, adaptors, components and their relationships can be represented by ISO/TS 13399 (all parts). The increasing demand providing the end user with 3D models for th

41、e purposes defined above is the basis for the development of this series of International Standards. The objective of ISO/TS 13399 (all parts) is to provide the means to represent the information that describes cutting tools in a computer-sensible form that is independent from any particular compute

42、r system. The representation will facilitate the processing and exchange of cutting tool data within and between different software systems and computer platforms and support the application of this data in manufacturing planning, cutting operations and the supply of tools. The nature of this descri

43、ption makes it suitable not only for neutral file exchange, but also as a basis for implementing and sharing product databases and for archiving. The methods that are used for these representations are those developed by ISO/TC 184/SC 4 for the representation of product data by using standardized in

44、formation models and reference dictionaries. Definitions and identifications of dictionary entries are defined by means of standard data that consist of instances of the EXPRESS entity data types defined in the common dictionary schema, resulting from a joint effort between ISO/TC 184/SC 4 and IEC/T

45、C 3/SC 3D and in its extensions defined in ISO 13584-24 and ISO 13584-25. ISO 2016 All rights reserved viiPD ISO/TS 13399-304:2016PD ISO/TS 13399-304:2016Cutting tool data representation and exchange Part 304: Creation and exchange of 3D models Solid milling cutters with arbor hole 1 Scope This part

46、 of ISO/TS 13399 specifies a concept for the design of tool items, limited to any kind of milling cutters with arbor hole and non-indexable cutting edges, together with the usage of the related properties and domains of values. This part of ISO/TS 13399 specifies a common way of design simplified mo

47、dels that contain the following: definitions and identifications of the design features of milling cutters with arbor hole and non- indexable cutting edges, with an association to the used properties; definitions and identifications of the internal structure of the 3D model that represents the featu

48、res and the properties of milling cutters with arbor hole and non-indexable cutting edges. The following are outside the scope of this part of ISO/TS 13399: applications where these standard data may be stored or referenced; concept of 3D models for cutting tools; concept of 3D models for cutting it

49、ems; concept of 3D models for other tool items not being described in the scope of this part of ISO/TS 13399; concept of 3D models for adaptive items; concept of 3D models for assembly items and auxiliary items. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its applicat