EN 62453-309-2017 Field device tool (FDT) interface specification - Part 309 Communication profile integration - IEC 61784 CPF 9.pdf

《EN 62453-309-2017 Field device tool (FDT) interface specification - Part 309 Communication profile integration - IEC 61784 CPF 9.pdf》由会员分享，可在线阅读，更多相关《EN 62453-309-2017 Field device tool (FDT) interface specification - Part 309 Communication profile integration - IEC 61784 CPF 9.pdf（56页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Field device tool (DFT) interface specificationPart 309: Communication profile integration - IEC 61784 CPF 9 (IEC 62453-309:2016)BS EN 62453-309:2017EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 62453-309December 20

2、17ICS 25.040.40; 35.100.05; 35.110 Supersedes EN 62453-309:2009 English VersionField device tool (FDT) interface specification - Part 309:Communication profile integration - IEC 61784 CPF 9(IEC 62453-309:2016)Spcification des interfaces des outils des dispositifs de terrain (FDT) - Partie 309: Intgr

3、ation des profils de communication - CPF 9 de lIEC 61784(IEC 62453-309:2016)Field Device Tool (FDT)-Schnittstellenspezifikation - Teil309: Integration von Kommunikationsprofilen -Kommunikationsprofilfamilie (CPF) 9 nach IEC 61784(IEC 62453-309:2016)This European Standard was approved by CENELEC on 2

4、016-07-19. CENELEC members are bound to comply with the CEN/CENELECInternal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be

5、obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CENELEC member into its own language and notified

6、 to the CEN-CENELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece

7、, Hungary, Iceland, Ireland, Italy, Latvia,Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,Switzerland, Turkey and the United Kingdom.European Committee for Electrotechnical StandardizationComit Europen de Normalisation Elec

8、trotechniqueEuropisches Komitee fr Elektrotechnische NormungCEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.Ref. No. EN 62453-309:2017 ENational forewordThis British Stand

9、ard is the UK implementation of EN 62453309:2017. It is identical to IEC 62453309:2016. It supersedes BS EN 62453-309:2009, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee AMT/7, Industrial communications: process measurement and control, including fie

10、ldbus.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI

11、Standards Limited 2018ISBN 978 0 580 85521 4ICS 35.100.05; 35.110; 25.040.40Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2018.Amendments/corrigend

12、a issued since publicationDate Text affectedBRITISH STANDARDBS EN 62453-309:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62453-309 December 2017 ICS 25.040.40; 35.100.05; 35.110 Supersedes EN 62453-309:2009 English Version Field device tool (FDT) interface specification - Part 309: Commu

13、nication profile integration - IEC 61784 CPF 9 (IEC 62453-309:2016) Spcification des interfaces des outils des dispositifs de terrain (FDT) - Partie 309: Intgration des profils de communication - CPF 9 de lIEC 61784 (IEC 62453-309:2016) Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 309:

14、 Integration von Kommunikationsprofilen - Kommunikationsprofilfamilie (CPF) 9 nach IEC 61784 (IEC 62453-309:2016) This European Standard was approved by CENELEC on 2016-07-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

15、 European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three officia

16、l versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnic

17、al committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Ser

18、bia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Bru

19、ssels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62453-309:2017 E BS EN 62453-309:2017EN 62453-309:2017 (E) 2 European foreword The text of document 65E/336/CDV, future edition 1 of IEC 62453-309:2016, prepared by SC 65E “

20、Devices and integration in enterprise systems“, of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62453-309:2017. The following dates are fixed: latest date by which this document has to be implemented a

21、t national level by publication of an identical national standard or by endorsement (dop) 2018-06-08 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2020-12-08 Attention is drawn to the possibility that some of the elements of this document may b

22、e the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62453-309:2016 was approved by CENELEC as a European Standard without any modification. BS EN 62453-309:2017EN 62453-309:

23、2017 (E) 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only

24、the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on th

25、e latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61158-5-20 - Industrial communication networks - Fieldbus specifications - Part 5-20: Application layer service definition - Type 20 elements EN 61158-5-20 - IEC

26、61158-6-20 - Industrial communication networks - Fieldbus specifications - Part 6-20: Application layer protocol specification - Type 20 elements EN 61158-6-20 - IEC 61784-1 - Industrial communication networks - Profiles - Part 1: Fieldbus profiles EN 61784-1 - IEC 62453-1 - Field Device Tool (FDT)

27、interface specification - Part 1: Overwiew and guidance EN 62453-1 - IEC 62453-2 - Field Device Tool (FDT) Interface Specification - Part 2: Concepts and detailed Description EN 62453-2 - BS EN 62453-309:2017This page deliberately left blank 2 IEC 62453-309:2016 IEC 2016 CONTENTS FOREWORD . 5 INTROD

28、UCTION . 7 1 Scope 8 2 Normative references. 8 3 Terms, definitions, symbols, abbreviated terms and conventions. 8 3.1 Terms and definitions 8 3.2 Abbreviated terms . 9 3.3 Conventions 9 3.3.1 Data type names and references to data types . 9 3.3.2 Vocabulary for requirements . 9 3.3.3 Use of UML 9 4

29、 Bus category . 9 5 Access to instance and device data 11 5.1 General . 11 5.2 Process Channel objects provided by DTM 11 5.3 DTM services to access instance and device data 12 6 Protocol-specific behavior 12 6.1 Overview. 12 6.2 Burst mode subscription 12 6.3 Usage of device addressing information

30、. 13 6.4 Extended Command Numbers . 14 6.5 Handling of communication failures and time-outs 14 6.6 Handling of Delayed Responses 14 6.7 Topologies with mixed HART protocols 16 6.7.1 General . 16 6.7.2 Behavior of DTMs supporting Extended_HART only 16 6.7.3 Behavior of DTMs supporting Extended_HART a

31、nd HART . 16 6.7.4 Behavior of DTMs that requires Extended_HART or HART . 17 6.8 Nested communication with multiple gateways . 18 6.9 Communication- and network structures in WirelessHART 18 6.9.1 General . 18 6.9.2 Network topology . 19 7 Protocol-specific usage of general data types . 21 8 Protoco

32、l-specific common data types . 22 9 Network management data types . 22 9.1 General . 22 9.2 Addressing modes . 22 9.3 Address information 23 9.4 Additional address information for Extended HART protocols 23 10 Communication data types . 25 10.1 General . 25 10.2 Protocol-specific Addressing Informat

33、ion . 26 10.3 Datatype definitions 26 11 Channel parameter data types . 30 12 Device identification 33 2 IEC 62453-309:2016 IEC 2016 CONTENTS FOREWORD . 5 INTRODUCTION . 7 1 Scope 8 2 Normative references. 8 3 Terms, definitions, symbols, abbreviated terms and conventions. 8 3.1 Terms and definition

34、s 8 3.2 Abbreviated terms . 9 3.3 Conventions 9 3.3.1 Data type names and references to data types . 9 3.3.2 Vocabulary for requirements . 9 3.3.3 Use of UML 9 4 Bus category . 9 5 Access to instance and device data 11 5.1 General . 11 5.2 Process Channel objects provided by DTM 11 5.3 DTM services

35、to access instance and device data 12 6 Protocol-specific behavior 12 6.1 Overview. 12 6.2 Burst mode subscription 12 6.3 Usage of device addressing information . 13 6.4 Extended Command Numbers . 14 6.5 Handling of communication failures and time-outs 14 6.6 Handling of Delayed Responses 14 6.7 Top

36、ologies with mixed HART protocols 16 6.7.1 General . 16 6.7.2 Behavior of DTMs supporting Extended_HART only 16 6.7.3 Behavior of DTMs supporting Extended_HART and HART . 16 6.7.4 Behavior of DTMs that requires Extended_HART or HART . 17 6.8 Nested communication with multiple gateways . 18 6.9 Commu

37、nication- and network structures in WirelessHART 18 6.9.1 General . 18 6.9.2 Network topology . 19 7 Protocol-specific usage of general data types . 21 8 Protocol-specific common data types . 22 9 Network management data types . 22 9.1 General . 22 9.2 Addressing modes . 22 9.3 Address information 2

38、3 9.4 Additional address information for Extended HART protocols 23 10 Communication data types . 25 10.1 General . 25 10.2 Protocol-specific Addressing Information . 26 10.3 Datatype definitions 26 11 Channel parameter data types . 30 12 Device identification 33 BS EN 62453-309:2017IEC 62453-309:20

39、16 IEC 2016 3 12.1 Protocol-specific handling of data type STRING . 33 12.2 Address Range for Scan 33 12.3 Support for Extended Manufacturer and Device Type Code 33 12.4 Device type identification data types for protocol HART 33 12.5 Common device type identification data types for Extended_HART pro

40、tocols . 37 12.6 Topology scan data types 42 12.7 Scan identification data types for protocol HART 43 12.8 Scan identification data types for Extended_HART protocols 45 12.9 Device type identification data types provided by DTM 47 Bibliography . 49 Figure 1 Part 309 of the IEC 62453 series 7 Figure

41、2 Burst mode subscription . 13 Figure 3 Handling of Delayed Reponses (scenario 1) 15 Figure 4 Handling of Delayed Reponses (scenario 2) 15 Figure 5 Behavior of DTMs supporting Extended_HART and HART . 17 Figure 6 Behavior of DTMs requires Extended_HART or HART 18 Figure 7 Host connected to a Wireles

42、sHART gateway device 19 Figure 8 FDT Topology of a WirelessHART network 20 Figure 9 Host connected to HART FSK . 20 Figure 10 FDT Topology when directly connected to a WirelessHART adapter device 21 Table 1 Protocol identifiers . 9 Table 2 Definition of PhysicalLayer . 10 Table 3 Protocol specific u

43、sage of general data types . 22 Table 4 Relation of ProtocolId and supported features 23 Table 5 Simple address information data types . 24 Table 6 Structured address information data types . 25 Table 7 Simple communication data types 26 Table 8 Structured communication data types . 28 Table 9 Simpl

44、e channel parameter data types 31 Table 10 Structured channel parameter data types . 31 Table 11 Address range for device identification . 33 Table 12 Identification data types with protocol-specific mapping for protocol HART 34 Table 13 Identification data types with semantics for protocol HART 36

45、Table 14 Simple identification data types for protocol HART with protocol independent semantics . 37 Table 15 Structured identification data types for protocol HART with protocol independent semantics . 37 Table 16 Identification data types for Extended_HART protocols with protocol-specific mapping

46、. 38 Table 17 Identification data types for Extended_HART protocols without protocol independent semantics . 41 Table 18 Simple identification data types for Extended_HART protocols with protocol independent semantics 42 BS EN 62453-309:2017 4 IEC 62453-309:2016 IEC 2016 Table 19 Structured identifi

47、cation data types for Extended_HART protocols with protocol independent semantics 42 Table 20 Structured device type identification data types 43 Table 21 Simple scan identification data types for protocol HART 43 Table 22 Structured scan identification data types for protocol HART 43 Table 23 Simpl

48、e scan identification data types for Extended_HART protocols 45 Table 24 Structured scan identification data types for Extended_HART protocols 45 Table 25 Structured device type identification data types 47 BS EN 62453-309:2017IEC 62453-309:2016 IEC 2016 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _

49、 FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION Part 309: Communication profile integration IEC 61784 CPF 9 FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions