ISO IEC 13210-1999 Information technology - Requirements and Guidelines for Test Methods Specifications and Test Method Implementations for Measuring Conformanc.pdf

《ISO IEC 13210-1999 Information technology - Requirements and Guidelines for Test Methods Specifications and Test Method Implementations for Measuring Conformanc.pdf》由会员分享，可在线阅读，更多相关《ISO IEC 13210-1999 Information technology - Requirements and Guidelines for Test Methods Specifications and Test Method Implementations for Measuring Conformanc.pdf（98页珍藏版）》请在麦多课文档分享上搜索。

1、Reference number ISO/IEC 13210:1999(E) IEEE Std 2003, 1997 edition INTERNATIONAL STANDARD ISO/IEC 13210 IEEE Std 2003 Second edition 1999-12-15 Information technology Requirements and Guidelines for Test Methods Specifications and Test Method Implementations for Measuring Conformance to POSIX Standa

2、rds Technologies de linformation Exigences et lignes directrices pour les spcifications de mthodes dessai et les mises en uvre de mthode dessai pour mesurer la conformit aux normes POSIXISO/IEC 13210:1999(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licen

3、sing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO

4、 Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has bee

5、n taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 734 10 7

6、9 E-mail copyrightiso.ch Web www.iso.chAbstract: This International Standard denes the requirements and guidelines for test method specications and test method implementations for measuring conformance to POSIX standards. Test specication standard developers for other Application Programming Interfa

7、ce (API) standards are encouraged to use this standard. This document is aimed primarily at developers and users of test method specications and implementations. Keywords: assertion, assertion test, implementation under test, option, conformance document, conformance test procedure, conformance test

8、 software, test method implementation, test method specication, test result code POSIX is a registered trademark of the Institute of Electrical and Electronics Engineers, Inc. The Institute of Electrical and Electronics Engineers, Inc. 345 East 47th Street, New York, NY 10017-2394, USA Copyright 199

9、8 by the Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 1998. Printed in the United States of America. ISBN 1-55937-895-6 No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permi

10、ssion of the publisher. 31 January 1998 SH94500 IEEE Standardsdocuments are developed within the IEEE Societies and the Standards Coordinat- ing Committees of the IEEE Standards Association (IEEE-SA) Standards Board. Members of the committees serve voluntarily and without compensation. They are not

11、necessarily members of the Institute. The standards developed within IEEE represent a consensus of the broad expertise on the subject within the Institute as well as those activities outside of IEEE that have expressed an inter- est in participating in the development of the standard. Use of an IEEE

12、 Standard is wholly voluntary. The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE Standard. Furthermore, the viewpoint expressed at the time a standard is appr

13、oved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. Every IEEE Standard is sub- jected to review at least every ve years for revision or reafrmation. When a document is more than ve years old and has not be

14、en reafrmed, it is reasonable to conclude that its contents, although still of some value, do not wholly reect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE Standard. Comments for revision of IEEE Standards are welcome from any

15、interested party, regardless of membership afliation with IEEE. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Interpretations: Occasionally questions may arise regarding the meaning of portions of standards as

16、they relate to specic applications. When the need for interpretations is brought to the attention of IEEE, the Institute will initiate action to prepare appropriate responses. Since IEEE Standards rep- resent a consensus of all concerned interests, it is important to ensure that any interpretation h

17、as also received the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to interpretation requests except in those cases where the matter has previously received formal consid

18、eration. Comments on standards and requests for interpretations should be addressed to: Secretary, IEEE-SA Standards Board 445 Hoes Lane P.O. Box 1331 Piscataway, NJ 08855-1331 USA Authorization to photocopy portions of any individual standard for internal or personal use is granted by the Institute

19、 of Electrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright Clearance Center. To arrange for payment of licensing fee, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; (978) 750-8400. Permission to phot

20、ocopy portions of any individual standard for educational class- room use can also be obtained through the Copyright Clearance Center. Note: Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this

21、standard, no position is taken with respect to the existence or validity of any patent rights in connection therewith. The IEEE shall not be responsible for identifying patents for which a license may be required by an IEEE standard or for conducting inquiries into the legal validity or scope of those patents that are brought to its attention.