TIA-707 10-B-1[E]-2006 Data Service Option for Spread Spectrum Systems《宽带扩频系统的数据业务可选》.pdf

《TIA-707 10-B-1[E]-2006 Data Service Option for Spread Spectrum Systems《宽带扩频系统的数据业务可选》.pdf》由会员分享，可在线阅读，更多相关《TIA-707 10-B-1[E]-2006 Data Service Option for Spread Spectrum Systems《宽带扩频系统的数据业务可选》.pdf（62页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA STANDARD Data Service Option for Spread Spectrum Systems TIA-707.10-B-1E June 2006 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alliance Copyright Telecommunications Industry Association Provided by IHS under

2、license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability a

3、nd improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling product

4、s not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standard

5、s Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable

6、 regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-4617.10-RV2-AD1E, formulated under the cognizance of the TIA, TR-45.5

7、Subcommittee on Spread Spectrum Digital Technology). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERI

8、NG PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. Copyright Telecommunications Industry Association Provided by IHS under license with

9、 EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyrigh

10、t permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright OR Telecommunications Industry Asso

11、ciation Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this

12、 Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TI

13、As attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licen

14、sing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been comp

15、lied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommenda

16、tion or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any

17、such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not

18、 constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of comp

19、liance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF A

20、NY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CON

21、TENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA SHALL NOT BE

22、 LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE

23、), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE

24、 PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-707.10-B-1E 1 INTRODUCTION 1-1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

25、 21 22 23 24 25 26 27 28 29 30 31 32 1.1 General Description . 1-1 1.2 Terms and Numeric Variables 1-1 1.3 References . 1-4 2 GENERAL REQUIREMENTS 2-1 2.1 Required Radio Configuration Support. 2-1 2.2 Required Multiplex Option Support 2-1 2.3 Interface to Multiplex Options 2-1 2.3.1 Primary Traffic

26、. 2-1 2.3.2 Secondary Traffic . 2-2 2.4 Traffic Channel Frame Priorities. 2-3 3 RLP PROCEDURES . 3-1 3.1 RLP_BLOB Procedures. 3-1 3.1.1 Mobile Station RLP_BLOB Procedures 3-1 3.1.2 Base Station Procedures 3-2 3.2 Initialization Procedures 3-4 3.3 SYNC Exchange Procedures. 3-4 3.4 RLP Reset Procedure

27、 3-5 3.5 RLP Encryption Mode When P_REV_IN_USE is Less Than Nine 3-5 3.5.1 Extended Data Frame Sequence Numbering. 3-6 3.5.2 RLP Data Encryption Negotiation . 3-6 3.5.2.1 ORYX Encryption Algorithm . 3-6 3.6 RLP Encryption Mode When P_REV_IN_USE is Greater Than or Equal to Nine. 3-7 3.6.1 Extended Da

28、ta Frame Sequence Numbering. 3-7 3.6.2 RLP Data Encryption Negotiation . 3-7 3.6.2.1 AES Encryption Algorithm For RLP Data Encryption 3-8 3.7 Data Transfer. 3-8 3.7.1 Transmitting RLP Frames. 3-8 3.7.1.1 Segmentation of Data Frames. 3-11 3.7.1.2 Idle Timer Operation. 3-11 3.7.1.3 Encryption 3-12 3.7

29、.1.3.1 Encryption Using the ORYX Encryption Algorithm 3-12 i Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-707.10-B-1E CONTENTS 3.7.1.3.2 Encryption Using the AES Encrypti

30、on Algorithm. 3-12 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 3.7.2 Receiving RLP Frames 3-13 3.7.2.1 Data Frame Processing. 3-14 3.7.2.1.1 Unsegmented Data Frame Processing . 3-16 3.7.2.1.2 Segmented Data Frame Processing . 3-17 3.7.2.2 Idle Frame Process

31、ing. 3-18 3.7.2.3 Fill Frame Processing . 3-18 3.7.2.4 NAK Control Frame Processing . 3-18 3.7.2.5 NAK List Processing 3-19 3.7.2.6 Decryption 3-20 3.7.2.6.1 Decryption Using ORYX Encryption Algorithm 3-21 3.7.2.6.2 Decryption Using AES Encryption Algorithm. 3-21 3.7.3 Frame Validity Checks . 3-22 4

32、 RLP FRAME FORMATS 4-1 4.1 Rate 1 RLP Frame Format A. 4-1 4.1.1 Format A for Primary Traffic. 4-1 4.1.2 Format A for Secondary Traffic. 4-2 4.2 Control Frames 4-3 4.2.1 SYNC, SYNC/ACK, and ACK Control Frames . 4-3 4.2.2 NAK Control Frame 4-4 4.3 Data Frames 4-6 4.3.1 Unsegmented Data Frames 4-6 4.3.

33、1.1 Unsegmented Data Frame Format 4-6 4.3.1.2 Unsegmented Data Frame using Segmented Data Frame Format . 4-7 4.3.2 Segmented Data Frames 4-8 4.3.3 Rate 1 Data Frame Format B 4-9 4.3.3.1 Format B for Primary Traffic . 4-9 4.3.3.2 Format B for Secondary Traffic . 4-10 4.3.4 Data Frame Format C. 4-11 4

34、.3.5 Data Frame Format D 4-11 4.4 Fill Frames. 4-13 4.5 Idle Frames 4-13 ii Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-707.10-B-1E 4.5.1 Idle Frame Format 1. 4-14 1 2 3

35、 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 4.5.2 Idle Frame Format 2. 4-14 4.6 RLP BLOB 4-15 FIGURES Figure 1 RLP Transmit Sequence Number . 3-9 Figure 2 RLP Segmentation . 3-9 Figure 3 RLP Receive Sequence Number Variables 3-14 TABLES Table 1 Primary Traffic RLP Frame Types Supplied by

36、RLP to the Multiplex Sublayer for multiplex options 0x1, 0x2, 0x3, 0x4, 0x809, 0x80a, 0x811, 0x812, 0x821, 0x822, 0x905, 0x906, 0x909, 0x90a, 0x911, 0x912, 0x921, 0x922, 0xf00 . 2-2 Table 2 Primary and Secondary Traffic RLP Frame Types Supplied by RLP to the Multiplex Sublayer for multiplex options

37、0x704 , 0xf00, and 0xf20. 2-2 Table 3 Secondary Traffic RLP Frame Types Supplied by RLP to the Multiplex Sublayer for multiplex options 0x1, 0x2, 0x3, 0x4, 0x809, 0x80a, 0x811, 0x812, 0x821, 0x822, 0x905, 0x906, 0x909, 0x90a, 0x911, 0x912, 0x921, 0x922, 0xf00 2-3 Table 4 Fundicated RLP Frame Categor

38、ies 2-5 Table 5 Multiplex Option Usage of RLP Frame Formats . 4-1 Table 6 Values of the Maximum Allowable Data Length (MAX_LEN) for Multiplex Options 0x1, 0x2, 0x3, and 0x4 4-7 iii Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction o

39、r networking permitted without license from IHS-,-,-TIA-707.10-B-1E 1 2 3 No text. iv Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-707.10-B-1E 1 INTRODUCTION 1 2 3 4 5 6

40、7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1.1 General Description This document specifies procedures for Radio Link Protocol Type 3. Radio Link Protocol Type 3 is used with a cdma20001Traffic Channel to support CDMA data services. For the remainder of this chapter, Radi

41、o Link Protocol Type 3 shall be called RLP. RLP provides an octet stream transport service over forward and reverse traffic channels. RLP is unaware of higher layer framing; it operates on a featureless octet stream, delivering the octets in the order received. RLP has procedures to substantially re

42、duce the error rate exhibited by CDMA traffic channels. There is no direct relationship between higher layer packets and the underlying traffic channel frames; a large packet may span multiple traffic channel frames, or a single traffic channel frame may contain all or part of several small higher l

43、ayer packets. Section 2 is a general description of RLP that defines its use by any service option for which it is suited. Section 3 defines the RLP procedures for encrypted or non-encrypted applications. Section 4 defines the RLP frame formats. Some features require capabilities first available in

44、cdma2000 Release A. Systems supporting only cdma2000 Release 0 do not support the following: Radio Configurations greater than 5. Multiplex options 0x704 and 0xf20. Variable Length Frame Mode (VLF). Some features are included for support of capabilities first available in cdma2000 Release C. Systems

45、 supporting cdma2000 Release 0 or cdma2000 Release A or cdma2000 Release B but not cdma2000 Release C do not support the following: Multiplex option 0xf00. 1.2 Terms and Numeric Variables Base Station (BS). A fixed station used for communicating with mobile stations. Depending upon the context the t

46、erm Base Station may refer to a cell, a sector within a cell, or other part of the wireless system. Blank RLP Frame. An RLP frame received from or supplied to the multiplex sublayer that contains no bits. BS. See base station. 1“cdma2000is the trademark for the technical nomenclature for certain spe

47、cifications and standards of the Organizational Partners (OPs) of 3GPP2. Geographically (and as of the date of publication), cdma2000 is a registered trademark of the Telecommunications Industry Association (TIA-USA) in the United States.” 1-1 Copyright Telecommunications Industry Association Provid

48、ed by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-707.10-B-1E BS/MSC. The base station and mobile switching center considered as a single functional entity. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 Data Block. A unit of data transmitted by the mobile/base station that carries one or more RLP frames. Dedicated Control Channel. A portion of a Traffic Channel which includes a Forward Dedicated Control Channel, a Reverse Dedicated Control Channel,