EN ISO 19160-4-2017 en Addressing - Part 4 International postal address components and template language.pdf

《EN ISO 19160-4-2017 en Addressing - Part 4 International postal address components and template language.pdf》由会员分享，可在线阅读，更多相关《EN ISO 19160-4-2017 en Addressing - Part 4 International postal address components and template language.pdf（72页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06AddressingPart 4: International postal address components and template language (ISO 19160-4:2017)BS EN ISO 19160-4:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 19160-4 December 2017 ICS 35.240.70 Supers

2、edes EN 14142-1:2011English Version Addressing - Part 4: International postal address components and template language (ISO 19160-4:2017) Adressage - Partie 4: Composants et langages des modles dadresses postales internationales (ISO 19160-4:2017) Adressierung - Teil 4: Bestandteile internationaler

3、postalischer Anschriften und Template-Sprachen (ISO 19160-4:2017) This European Standard was approved by CEN on 12 December 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standa

4、rd without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any

5、 other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Repub

6、lic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. E

7、UROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 19160

8、-4:2017 ENational forewordThis British Standard is the UK implementation of EN ISO 191604:2017. It is identical to ISO 191604:2017. It supersedes BS EN 141421:2011, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee IST/36, Geographic information.A list o

9、f organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limi

10、ted 2018ISBN 978 0 580 84634 2ICS 03.240Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2018.Amendments/corrigenda issued since publicationDate Text a

11、ffectedBRITISH STANDARDBS EN ISO 191604:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 19160-4 December 2017 ICS 35.240.70 Supersedes EN 14142-1:2011English Version Addressing - Part 4: International postal address components and template language (ISO 19160-4:2017) Adressage - Partie

12、4: Composants et langages des modles dadresses postales internationales (ISO 19160-4:2017) Adressierung - Teil 4: Bestandteile internationaler postalischer Anschriften und Template-Sprachen (ISO 19160-4:2017) This European Standard was approved by CEN on 12 December 2017. CEN members are bound to co

13、mply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENEL

14、EC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the

15、same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembou

16、rg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-10

17、40 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 19160-4:2017 EBS EN ISO 191604:2017EN ISO 19160-4:2017 (E) 3 European foreword This document (EN ISO 19160-4:2017) has been prepared by Technical Committee ISO/TC

18、 211 “Geographic information/Geomatics” in collaboration with Technical Committee CEN/TC 331 “Postal services” the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest

19、 by June 2018, and conflicting national standards shall be withdrawn at the latest by June 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This

20、 document supersedes EN 14142-1:2011. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to imple

21、ment this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,

22、 Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 19160-4:2017 has been approved by CEN as EN ISO 19160-4:2017 without any modification. BS EN ISO 191604:2017ISO 19160-4:2017(E)Foreword vIntroduction vi1 Scope . 12 Normative re

23、ferences 13 Terms and definitions . 24 Abbreviated terms 65 Conformance . 65.1 Composition 65.2 U-code . 65.3 Rendering of postal address 65.4 PATDL template 66 Postal address components 76.1 General . 76.2 Postal address segments 96.3 Postal address constructs . 106.4 Postal address elements 106.5

24、Postal address sub-elements . 166.6 Requirement for composition . 197 Element and sub-element codes .197.1 General 197.2 Requirement for a U-code 198 Postal address rendering 208.1 General 208.2 Rendering parameters . 228.3 Rendition instructions . 228.3.1 General. 228.3.2 Concatenation238.3.3 Abbre

25、viation .238.3.4 Punctuation . 238.4 Requirements for rendering of postal address 238.5 Requirement for domain of postal address template .249 Postal address template description language (PATDL) 249.1 General 249.2 PATDL as an XML Schema . 249.2.1 General. 249.2.2 Requirement for encoding of render

26、ing rules .259.2.3 Requirement for data populating PATDL elements 259.3 PATDL elements 259.3.1 General. 259.3.2 templateIdentifier 269.3.3 userPreferences .279.3.4 triggerConditions .279.3.5 lineData . 299.3.6 combineData.31Annex A (normative) Abstract test suites .33Annex B (informative) Postal add

27、ress profile of ISO 19160-1 35Annex C (informative) Mapping conventions42Annex D (informative) Template design patterns51 ISO 2017 All rights reserved iiiContents PageBS EN ISO 191604:2017ISO 19160-4:2017(E)Annex E (informative) PATDL features 55Annex F (informative) Example of PATDL template .58Bib

28、liography .61iv ISO 2017 All rights reservedBS EN ISO 191604:2017ISO 19160-4:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out throu

29、gh ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collabora

30、tes closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval cr

31、iteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject

32、of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade nam

33、e used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to

34、 the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.This document was prepared by Technical Committee ISO/TC 211, Geographic information/Geomatics.A list of all parts in the ISO 19160 series can be found on the

35、ISO website. ISO 2017 All rights reserved vBS EN ISO 191604:2017ISO 19160-4:2017(E)IntroductionPostal service provides letter, package and parcel delivery on a global and universal basis, without the need for mailers and recipients to enter into explicit service contracts. Postal addresses, which co

36、mbine private recipient information with publicly known delivery point data, provide the mechanism through which mailers specify the intended recipient and the means by which the postal operator can fulfil its delivery commitment.Traditionally, postal operators have been highly flexible with regard

37、to the manner in which postal items can be addressed; any form and content of address was acceptable as long as it permitted sufficiently unambiguous determination of the delivery point. Even today, many posts pride themselves on their ability, using staff intelligence and local knowledge, to delive

38、r postal items carrying incomplete or unusual address representations.However, increasing volumes and labour cost rates long ago reached the point at which automation became not only economic, but essential. As a result, it has become more and more vital to ensure that the vast majority of postal it

39、ems are addressed in a way which can be processed automatically, without risk of misinterpretation.When mail is sent with addresses that are incorrect or incomplete, there is the possibility of undeliverable as addressed mail (UAA mail) which results in the mail being sent back to a return address,

40、being sent on to a forwarding address or discarded as waste. All this unnecessary work has negative economic consequences.Today, the vast majority of postal items carry printed addresses which are extracted from computer databases. Such databases need to be maintained in the face of population mobil

41、ity, creation and retirement of delivery points and changes in their specification, such as renaming of streets, renumbering of properties, etc. Moreover, there is a growing need for validation of addresses in e-commerce and the tendency for organizations to exchange or trade address data and for or

42、ganizations in one country to hold address data of organizations and individuals in other countries, which might use different approaches to the rendering of postal addresses.Addresses can be rendered according to rules that differ from country to country or from one mailing event (a batch of mail,

43、e.g. letters or monthly statements, sent by a mailer at one time) to another. This document does not impose any obligation on countries or mailers on how addresses shall be rendered but provides a language to express rendering rules recommended by postal operators for mailing purposes.Templates spec

44、ified according to this document may be used to exchange information about address rendering rules on international cross-border mail and domestic mail. These templates are available from the UPU for all countries which have approved them. This facilitates automated processing of mail and internatio

45、nal e-commerce deliveries. Rendition engines based on this document are expected to produce the same results for the same addresses. This is conditional upon using approved templates with the same parameters. Even if this were not the case, consistency remains an appropriate goal.The intended reader

46、s of this document include designers and developers of computer systems that process global postal address data including postal address rendering, those who formulate and implement international addressing policies and anyone seeking to reduce UAA mail.The preparatory work for this project is descr

47、ibed in Review summary of the ISO 19160 stage zero project (20110)2and recommended five projects with the following titles: Addressing Conceptual model Addressing Good practices for address assignment schemes Addressing Quality management for address data Addressing International postal address comp

48、onents and template languagevi ISO 2017 All rights reservedBS EN ISO 191604:2017ISO 19160-4:2017(E) Addressing Address rendering for purposes other than mailThis document implements the fourth of these recommendations and focuses solely on addresses for postal purposes. Addresses for other purposes

49、are described in other parts of ISO 19160.This document is based on UPU S42, Part A, Version 7 and has been developed with UPU. It is intended to be adopted by CEN as a replacement for EN 14142-1. ISO 2017 All rights reserved viiBS EN ISO 191604:2017BS EN ISO 191604:2017Addressing Part 4: International postal address components and template language1 ScopeThis document defines key terms for postal addressing, postal address components and constraints on their use.Specifically, this document defines postal address components