CEN TR 16626-2014 Vitrified clay pipe systems for drains and sewers - Guidance for voluntary third-party certification procedures《陶管排水和下水道系统 自愿第三方认证程序指南》.pdf

《CEN TR 16626-2014 Vitrified clay pipe systems for drains and sewers - Guidance for voluntary third-party certification procedures《陶管排水和下水道系统 自愿第三方认证程序指南》.pdf》由会员分享，可在线阅读，更多相关《CEN TR 16626-2014 Vitrified clay pipe systems for drains and sewers - Guidance for voluntary third-party certification procedures《陶管排水和下水道系统 自愿第三方认证程序指南》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationPD CEN/TR 16626:2014Vitrified clay pipe systems fordrains and sewers Guidancefor voluntary third-partycertification proceduresPD CEN/TR 16626:2014 PUBLISHED DOCUMENTNational forewordThis Published Document is the UK implementation of CEN/TR16626:2014.The UK participation in

2、its preparation was entrusted to TechnicalCommittee B/505/2, Clay Pipes.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplic

3、ation. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 82824 9ICS 23.040.01; 93.030Compliance with a British Standard cannot confer immunity fromlegal obligations.This Published Document was published under the authority of theStandards Policy and Strateg

4、y Committee on 31 January 2014.Amendments issued since publicationDate Text affectedPD CEN/TR 16626:2014TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16626 January 2014 ICS 23.040.01; 93.030 English Version Vitrified clay pipe systems for drains and sewers - Guidance for voluntary th

5、ird-party certification procedures Systmes de tuyaux en grs vitrifi pour les collecteurs dassainissement et les branchements - Lignes directrices relatives aux procdures de certification volontaire par tierce partie Steinzeugrohrsysteme fr Abwasserleitungen und -kanle -Leitfaden fr Verfahren zur fre

6、iwilligen FremdberwachungThis Technical Report was approved by CEN on 28 October 2013. It has been drawn up by the Technical Committee CEN/TC 165. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav

7、Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE N

8、ORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TR 16626:2014 EPD CEN/TR 16626:2014CEN/TR 16626:2014 (E) 2 Contents

9、Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 General 5 5 Inspection, audits and certification .5 6 Audit testing .5 Bibliography 9 PD CEN/TR 16626:2014CEN/TR 16626:2014 (E) 3 Foreword This document (CEN/TR 16626:2014) has been prepared by Technical Committee CEN/TC

10、 165 “Wastewater engineering”, the secretariat of which is held by DIN. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. PD CEN/TR 1662

11、6:2014CEN/TR 16626:2014 (E) 4 1 Scope This Technical Report gives guidance for the assessment of conformity of vitrified clay pipe systems for drains and sewers including pipes, fittings, manholes, perforated pipes, jacking pipes and associated products by the establishment of voluntary third-party

12、certification procedures. It is recommended that the quality management system conforms to or is no less stringent than the relevant requirements to EN ISO 9001. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for

13、 its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 295-1:2013, Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for pipes, fittings and joints EN

14、295-2:2013, Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling EN 295-3:2012, Vitrified clay pipe systems for drains and sewers - Part 3: Test methods EN 295-4:2013, Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors,

15、connectors and flexible couplings EN 295-5:2013, Vitrified clay pipe systems for drains and sewers - Part 5: Requirements for perforated pipes and fittings EN 295-6:2013, Vitrified clay pipes systems for drain and sewers - Part 6: Requirements for components of manholes and inspection chambers EN 29

16、5-7:2013, Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking EN ISO/IEC 17021, Conformity assessment - Requirements for bodies providing audit and certification of management systems (ISO/IEC 17021) EN ISO/IEC 17065, Conformity assessment -

17、 Requirements for bodies certifying products, processes and services (ISO/IEC 17065) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 295-2:2013 and the following apply. 3.1 certification body third party assessment body operating certification schemes

18、 Note 1 to entry: A certification body can be non-governmental or governmental (with or without regulatory authority). Note 2 to entry: A certification body is preferably accredited to EN ISO/IEC 17021 and EN ISO/IEC 17065. PD CEN/TR 16626:2014CEN/TR 16626:2014 (E) 5 4 General This document contains

19、 the conditions for the assessment of conformity of any single product to EN 295-1, EN 295-4, EN 295-5, EN 295-6 and EN 295-7. However, in order to make an assessment of conformity of a full range of products coming off a production line, more elements are needed for such as a certification scheme.

20、This certification scheme can be required by contractual agreements for example. It is independent from the strict assessment and verification of constancy of performance procedures as given in EN 295-1:2013, ZA.2, EN 295-4:2013, ZA.2, EN 295-5:2013, ZA.2, EN 295-6:2013, ZA.2, and EN 295-7:2013, ZA.

21、2. Unless there is a certification scheme in place, the following clauses represent the best way to assess the conformity of a range of products to the EN 295 series of product standards. 5 Inspection, audits and certification Conformity assessment is carried out by a certification body at least twi

22、ce a year without prior notice. Third party assessors comply with EN ISO/IEC 17021 and EN ISO/IEC 17065 or equivalent. The assessors undertake the following tasks: inspections of the factory production control established and documented by the manufacturer according to EN 295-2:2013, 5.3; checks of

23、the records, including those of the initial type testing, performed according to EN 295-2:2013, 5.2; and witnessing the audit tests performed according to Table 1 to Table 5. After passing the conformity assessment, the certification body can authorise the use of their identification symbol. 6 Audit

24、 testing Product requirements, test methods and the number of samples for audit testing are given in Table 1 to Table 5. Samples for testing are selected at random. PD CEN/TR 16626:2014CEN/TR 16626:2014 (E) 6 Table 1 Audit testing for products to EN 2951:2013 Subject of test Characteristic Requireme

25、nts according to EN 2951:2013, Clause Testing Number of samples Pipes and fittings Materials and manufacture 5.1 Visual inspection Three samples of one nominal size Dimensions 5.2, 5.3, 5.6, 5.7, 5.8 Measurement 5.4 according to EN 295-3:2012, Clause 5 5.5 according to EN 295-3:2012, Clause 6 Markin

26、g 9.1 Visual inspection Pipes Crushing strength 5.9 according to EN 295-3:2012, Clause 7 Watertightness and airtightness 5.14 and 5.18 according to EN 2953:2012, Clause 12 and Clause 16 One sample of one nominal size Fittings Bond strength 5.12.1 according to EN 295-3:2012, Clause 10 Airtightness or

27、 watertightness 5.14 and 5.18 according to EN 2953:2012, Clause 12 and Clause 16 Joints Watertightness 6.2 according to EN 295-3:2012, 21.2 and 21.3 One joint of one nominal size Joint interchangeability dimensions 6.4 Three samples of one nominal size Marking 9.2 PU sealing elements All according t

28、o EN 6814 6.1.2, 6.1.4 One sample per moulding plant PP sleeve couplings Melt flow index 6.1.3.1 according to EN 295-3:2012,19.1 One sample per moulding plant Tensile strength 6.1.3.1 according to EN 295-3:2012, 19.2 Elongation at break 6.1.3.1 according to EN 295-3:2012, 19.2 Elevated temperature 6

29、.1.3.1 according to EN 295-3:2012, 19.3 Line displacement 6.1.3.2 according to EN 295-3:2012, Clause 20 Three samples of one nominal size Other joint materials Declared specification 6.1.5 PD CEN/TR 16626:2014CEN/TR 16626:2014 (E) 7 Table 2 Audit testing for products to EN 2954:2013 Subject of test

30、Characteristic Requirements according to EN 295-4:2013, Clause Testing Number of samples Metal banded flexible couplings and adopters Materials A.3.1 Visual inspection Three samples of one nominal size Dimensions A.3.2 Measurement Performance requirements A.3.3 according to EN 2954:2013, A.3.4 One s

31、ample of one nominal size Marking 8 Visual inspection Three samples of one nominal size Connectors and insertable fittings and sealing rings Materials 5.1 Visual inspection Three samples of one nominal size Dimensions 5.2 to 5.5 Measurement Performance requirements 5.9 according to EN 2953:2012, Cla

32、use 21 One sample of one nominal size Marking 8 Visual inspection Three samples of one nominal size Heat shrinkable sleeves Materials C.2 Visual inspection Three samples of one nominal size Dimensions C.3 Measurement Performance requirements C.4 according to EN 2954:2013, C.4 One sample of one nomin

33、al size Marking 8 Visual inspection Three samples of one nominal size Table 3 Audit testing for products to EN 2955:2013 Subject of test Characteristic Requirements according to EN 295-5:2013, Clause Testing Number of samples Pipes and fittings Materials and manufacture 4.1 Visual inspection Three s

34、amples of one nominal size Dimensions 4.2, 4.3, 4.5, 4.6 and 4.7 Measurement 4.4 according to EN 2953:2012, Clause 6 Marking 8 Visual inspection Pipes Crushing strength 4.8 according to EN 2953:2012, Clause 7 Marking 8 Visual inspection PD CEN/TR 16626:2014CEN/TR 16626:2014 (E) 8 Table 4 Audit testi

35、ng for products to EN 2956:2013 Subject of test Characteristic Requirements according to EN 2956:2013, Clause Testing Number of samples Manholes and inspection chambers Materials and manufacture 4.1 Visual inspection Three samples of one nominal size Dimensions 4.2, 4.3, 4.4 and 4.5 Measurement Crus

36、hing strength 4.6 according to EN 295-3:2012, Clause 7 Bond strength 4.8 according to EN 295-3:2012, Clause 10 Watertightness 4.11 according to EN 295-3:2012, Clause 26 One assembly of one nominal size Joint interchangeability dimensions 4.12 Measurement Three samples of one nominal size Marking 7 V

37、isual inspection Table 5 Audit testing for products to EN 2957:2013 Subject of test Characteristic Requirements according to EN 2957:2013, Clause Testing Number of samples Pipes Materials and manufacture 4.1 Visual inspection Three samples of one nominal size Dimensions 4.2.2, 4.2.3, 4.2.4, 4.2.5, 4

38、.2.6 Measurement 4.2.7 according to EN 295-3:2012, Clause 5 4.2.8 according to EN 295-3:2012, Clause 6 Crushing strength 4.3.1 according to EN 295-3:2012, Clause 7 Compressive strength 4.3.3 according to EN 295-3:2012, Clause 27 One sample of one nominal size Watertightness and airtightness 4.4 and

39、4.5 according to EN 295-3:2012, Clause 12 and Clause 16 One sample of one nominal size Marking 8 Visual inspection Three samples of one nominal size Joints Watertightness 5.3 according to EN 295-3:2012, 21.2 and 21.3 One joint of one nominal size PD CEN/TR 16626:2014CEN/TR 16626:2014 (E) 9 Bibliogra

40、phy 1 EN ISO 9001, Quality management systems - Requirements (ISO 9001) This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Roy

41、al Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape

42、their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achie

43、ve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions o

44、f BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Servic

45、es team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards f

46、rom your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS i

47、s an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL

48、) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publicati

49、ons are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some