ASTM E2676-2009(2014) Standard Practice for Tangible Property Mobility Index &40 MI&41 《有形资产流动指数40 MI41的标准实施规程》.pdf

《ASTM E2676-2009(2014) Standard Practice for Tangible Property Mobility Index &40 MI&41 《有形资产流动指数40 MI41的标准实施规程》.pdf》由会员分享，可在线阅读，更多相关《ASTM E2676-2009(2014) Standard Practice for Tangible Property Mobility Index &40 MI&41 《有形资产流动指数40 MI41的标准实施规程》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: E2676 09 (Reapproved 2014)Standard Practice forTangible Property Mobility Index (MI)1This standard is issued under the fixed designation E2676; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision.

2、 A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This practice covers standardizing practice and termi-nology related to information conveying the mobility oftangible property.1.2 T

3、his practice describes a graduated index depicting in astandard manner the mobility of tangible property, assigning astandard name and index number to each. The index rangesfrom indiscernible to immovable. The mobility index rangesfrom MI 0 for non-discernable items to MI 10 for real prop-erty.1.3 W

4、hile examples are given of items that may be associ-ated with a particular mobility index number, the intent of thispractice does not include rigid prescriptive assignment of itemsor types of items to specific mobility indexes. Individualentities may make their own assignments based on theirjudgment

5、 unless or until standard practice based on experienceusing this practice emerges.1.4 In conjunction with Practice E2608, entities may basedecisions on control classes and control classes in whole or inpart based on the mobility indices of the items.1.5 In conjunction with Practice E2132, entities m

6、ay de-velop their physical inventory plans for classes of items basedin whole or in part on the mobility indices of the items.1.6 In conjunction with Practice E2131, entities may ana-lyze and report their loss, damage, and destruction experiencebased in whole or in part on the mobility indices of th

7、e items.1.7 There is no existing, recognized practice for recording,discussing, and comparing mobility information.1.8 This practice is designed to be applicable and appropri-ate for all tangible property-holding entities.1.9 This standard does not purport to address all of thesafety concerns, if an

8、y, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.2. Referenced Documents2.1 ASTM Standards:2E2131 Practice forAddressing and Reporting Loss, D

9、amage,or Destruction of Tangible PropertyE2132 Practice for Inventory Verification: Electronic andPhysical Inventory of AssetsE2135 Terminology for Property and Asset ManagementE2279 Practice for Establishing the Guiding Principles ofProperty ManagementE2608 Practice for Equipment Control Matrix (EC

10、M)3. Terminology3.1 DefinitionsFor definitions relating to property andasset management, refer to Terminology E2135.3.2 Acronyms:3.2.1 ECMequipment control matrix3.2.2 MImobility index3.2.3 PDAPersonal digital assistant4. Significance and Use4.1 Establish a standard notational and conversational ap-

11、proach to tangible property mobility and related information toenable precision in requirements and results related to move-ment and tracking.4.2 Foster and enable additional standard practices relatedto or based on mobility practice and information.5. Tangible Property Mobility Index5.1 Mobility In

12、dex (MI):5.1.1 MI 0: Non-Discernable ItemsItems for which move-ment is not visible or discernable because of its size or othercharacteristics. MI 0 is one theoretical end point of the mobilityindex.5.1.2 MI 1: Discernable ItemsItems for which movementis not visible because of its size or other chara

13、cteristics but forwhich movement is discernable. Examples of MI 1 itemsinclude airborne gases and particles and nanotechnology items.1This practice is under the jurisdiction of ASTM Committee E53 on AssetManagement and is the direct responsibility of Subcommittee E53.05 on PropertyManagement Maturit

14、y.Current edition approved June 1, 2014. Published June 2014. Originallyapproved in 2009. Last previous edition approved in 2009 as E267609. DOI:10.1520/E2676-09R14.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Bo

15、ok of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States15.1.3 MI 2: Bulk ItemsItems for which movement isvisible and that are normally mov

16、ed in bulk. Examples of MI 2items include computer chips and screws.5.1.4 MI 3: Personal ItemsItems that are normally andeasily carried by people on their person for use or transporta-tion purposes, for example, in a pocket or purse. Examples ofMI 3 items include memory sticks, mobile telephones, an

17、dpersonal digital assistants (PDAs).5.1.5 MI 4: Portable ItemsItems that are too large to benormally and easily carried by people on their person for use ortransportation purposes but that are designed or intended to becarried or easily moved. Examples of MI 4 items includelaptop computers and porta

18、ble oscilloscopes.5.1.6 MI 5: Personally Moveable ItemsItems that arenormally moved by individuals but that are typically larger andheavier than portable items. Examples of MI 5 items includedesktop computers and displays.5.1.7 MI 6: Items Personally Moveable with MechanicalAssistanceItems beyond pe

19、rsonally moveable items that aremoved by individuals with normally available means ofmechanical assistance, such as hand trucks or dollies. Ex-amples of MI 6 items include small industrial equipment andfixtures.5.1.8 MI 7: Self-Locomoting ItemsItems that are designedand built with a power source to

20、enable movement from placeto place. Examples of MI 7 items include aircraft, vehicles, andships.5.1.9 MI 8: Items Moveable with Significant MechanicalAssistanceItems requiring significant mechanical assistance,such as forklifts or cranes, to be moved. Examples of MI 8items include heavy industrial e

21、quipment and jersey walls.5.1.10 MI 9: Removable FixturesItems fixed in place asremovable components of real property. Examples of MI 9items include streetlights and utility poles.5.1.11 MI 10: Real PropertyReal property items that shalltypically be dismantled or destroyed to be moved. Examples ofMI

22、 10 items include houses, office buildings, bridges, androads.5.2 Items or groups of like items should be assigned to themost appropriate index level.6. Usage6.1 An entity should use the mobility index terminology ornumerical level references or both to assure requirements andresults related to mobi

23、lity and location control are uniformlyexpressed and communicated.6.2 An entity should determine the appropriate mobilitylevel for items to better inform life-cycle management,maintenance, tracking, and overall communications with thegoal of cost-effective support of the mission of the entity inacco

24、rdance with Practice E2279.6.3 The mobility index should be determined and recorded.This may be done for all tangible property or specific subsetsof tangible property.6.4 Separately, or in conjunction with Practice E2608 andother standards, the entity should use the mobility index tobetter define po

25、licy, processes, and procedures for managingtangible property.6.5 This practice enables effective and consistent commu-nication regarding tangible property mobility practice andinformation.7. Keywords7.1 MI; mobility; mobility index; portable; property; tan-gible propertyASTM International takes no

26、position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsi

27、bility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to

28、 ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the addr

29、ess shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the ASTM website (www.astm.org/COPYRIGHT/).E2676 09 (2014)2