ASTM D5612-1994(2013) 5000 Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program《水质测量的质量规划和现场实施标准的标准指南》.pdf

《ASTM D5612-1994(2013) 5000 Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program《水质测量的质量规划和现场实施标准的标准指南》.pdf》由会员分享，可在线阅读，更多相关《ASTM D5612-1994(2013) 5000 Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program《水质测量的质量规划和现场实施标准的标准指南》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: D5612 94 (Reapproved 2013)Standard Guide forQuality Planning and Field Implementation of a WaterQuality Measurement Program1This standard is issued under the fixed designation D5612; the number immediately following the designation indicates the year oforiginal adoption or, in the case

2、of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This guide covers planning and implementation of thesampling aspects of environmental data ge

3、neration activities.Environmental data generation efforts are comprised of fourparts: (1) establishment of data quality objectives (DQOs); (2)design of field sampling and measurement strategies andspecification of laboratory analyses and data acceptance crite-ria; (3) implementation of sampling and

4、analysis strategies; and(4) data quality assessment.1.2 This guide defines the criteria that must be considered toensure the quality of the field aspects of environmental dataand sample generation activities.1.3 DQOs should be adopted prior to the application of thisguide. The data generated in acco

5、rdance with this guide aresubject to a final assessment to determine whether the DQOswere met. For example, many screening activities do notrequire all of the quality assurance (QA) and quality control(QC) steps found in this guide to generate data adequate tomeet the project needs. The extent to wh

6、ich all of therequirements must be met remains a matter of technicaljudgement as it relates to the established DQOs.1.4 This guide presents extensive management requirementsdesigned to ensure high-quality samples and data. The words“must,”“ shall,” “may,” and “should” have been selectedcarefully to

7、reflect the importance placed on many of thestatements made in this guide.1.5 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine

8、 the applica-bility of regulatory limitations prior to use.2. Referenced Documents2.1 ASTM Standards:2D596 Guide for Reporting Results of Analysis of WaterD1129 Terminology Relating to WaterD2777 Practice for Determination of Precision and Bias ofApplicable Test Methods of Committee D19 on WaterD337

9、0 Practices for Sampling Water from Closed ConduitsD3856 Guide for Management Systems in LaboratoriesEngaged in Analysis of WaterD4210 Practice for Intralaboratory Quality Control Proce-dures and a Discussion on Reporting Low-Level Data(Withdrawn 2002)3D4447 Guide for Disposal of Laboratory Chemical

10、s andSamplesD4448 Guide for Sampling Ground-Water Monitoring WellsD4840 Guide for Sample Chain-of-Custody ProceduresD4841 Practice for Estimation of Holding Time for WaterSamples Containing Organic and Inorganic ConstituentsD5172 Guide for Documenting the Standard Operating Pro-cedures Used for the

11、Analysis of WaterD5283 Practice for Generation of Environmental Data Re-lated to Waste Management Activities: Quality Assuranceand Quality Control Planning and ImplementationE29 Practice for Using Significant Digits in Test Data toDetermine Conformance with SpecificationsE178 Practice for Dealing Wi

12、th Outlying ObservationsE1187 Terminology Relating to Conformity Assessment(Withdrawn 2006)32.2 U.S. Environmental Protection Agency Documents:4QAMS-005/80 (NTIS No. PB83170514/LL), Interm Guide-lines and Specifications for Preparing Quality Assurance1This guide is under the jurisdiction of ASTM Com

13、mittee D19 on Water and isthe direct responsibility of Subcommittee D19.02 on Quality Systems, Specification,and Statistics. Technical Resources, and Statistical Methods.Current edition approved Jan. 1, 2013. Published January 2013. Originallyapproved in 1994. Last previous edition approved in 2008

14、as D5612 94 (2008).DOI: 10.1520/D5612-94R13.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.3The last approve

15、d version of this historical standard is referenced onwww.astm.org.4Available from Standardization Documents Order Desk, DODSSP, Bldg. 4,Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098, http:/www.dodssp.daps.mil.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshoho

16、cken, PA 19428-2959. United States1Project Plans, Office of Monitoring Systems and QualityAssurance, Dec. 29, 1980QAMS-500/80. Development of Data Quality Objectives,Description of Stages I and II, July 16, 1986QAMS-004/80 (NTIS No. PB83219667/LL), Guidelines andSpecifications for Preparing Quality

17、Assurance ProgramPlans, Office of Monitoring Systems and QualityAssurance, Sept. 20, 19803. Terminology3.1 DefinitionsThe terms that are most applicable to thisguide have been defined in Terminologies D1129 and E1187.3.2 Definitions of Terms Specific to This Standard:3.2.1 background samplea sample

18、taken from a locationon or proximate to the site of interest. This sample is taken todocument baseline or historical information.3.2.2 collocated samplesindependent samples collected asclose as possible to the same point in space and time andintended to be identical.3.2.3 data quality objectives (DQ

19、Os) statements on thelevel of uncertainty that a decision maker is willing to acceptin the results derived from environmental data (see QAMS-500/80).3.2.4 material blanka sample composed of constructionmaterials such as those used in well installation. Welldevelopment, pump and flow testing, and slu

20、rry wall construc-tion. Examples of these materials are bentonite, sand, drillingfluids, and source and purge water. This blank documents thecontamination resulting from usage of the construction mate-rials.3.2.5 quality assurance program plan (QAPP)an orderlyassemblage of management policies, objec

21、tives, principles, andgeneral procedures by which an organization involved inenvironmental data generation activities outlines how it intendsto produce data of known quality.3.2.6 quality assurance project plan (QAPjP)an orderlyassemblage of detailed procedures designed to produce data ofsufficient

22、quality to meet the DQOs for a specific datacollection activity.4. Summary of Guide4.1 This guide describes the criteria and activities fororganizations involved in obtaining water samples and gener-ating field data in terms of human and physical resources andQC procedures and documentation requirem

23、ents depending onthe DQOs or agreed upon project plan.5. Significance and Use5.1 Environmental data are often required for making regu-latory and programmatic decisions. These data must be ofknown quality commensurate with their intended use.5.2 Certain minimal criteria must be met by the fieldorgan

24、izations in order to meet the objectives of the watermonitoring activities.5.3 This guide defines the criteria for organizations takingwater samples and generating environmental data and identifiesother activities that may be required based on the DQOs.5.4 This guide emphasizes the importance of com

25、munica-tion among those involved in establishing the DQOs, planning,and implementing the sampling and analysis aspects of envi-ronmental data generation activities, and assessing data quality.6. Project Specification6.1 Overall Project Objectives The overall objectives ofthe project must be defined

26、prior to the start of any field andlaboratory activities.6.2 Data Quality ObjectivesDQOs for the data generationactivity should be defined prior to the initiation of field andlaboratory work, and they must be compatible with projectobjectives. It is desirable that the field and laboratory organi-zat

27、ions be aware of the DQOs so that the personnel conductingthe work are able to make informed decisions during the courseof the project.6.3 Project Plan The project plan should be designed tomeet the project objectives and DQOs. The project plan shoulddefine the following:6.3.1 Specific Project Objec

28、tives The objectives of thefield and laboratory work must be defined clearly, definespecific objectives for the sampling location, and describe theintended uses for the data. The project objective may need to bereviewed as information is gathered. Any changes in theproject objective affecting field

29、and laboratory activities shouldbe communicated to the field and laboratory personnel.6.3.2 Background InformationAny background informa-tion that could affect meeting the project objective or DQOsshould be provided. For example, the identification of anyregulatory programs governing data collection

30、 and analysis andthe reason for conducting the sample collection work should beincluded in the background information.6.3.3 Project management shall have individuals designatedas having responsibility and authority for the following: (1)developing project documents that implement the DQOs; (2)select

31、ing field and laboratory organizations to conduct thework; (3) coordinating communication among the field andlaboratory organizations and government agencies, as required;and (4) reviewing and assessing the final data.6.3.4 Sampling requirements shall be specified, includingsampling locations, equip

32、ment and procedures, and samplepreservation and handling.6.3.5 Analytical requirements shall be specified, includingthe analytical procedures, analyte list, required detection limits,and required precision and bias values. Regulatory require-ments and DQOs shall be considered when developing thespec

33、ifications.NOTE 1The above does not imply that the specified analyticalrequirements can be met.6.3.6 The QA and QC requirements shall address both fieldand laboratory activities. The means for controlling falsepositives and false negatives shall be specified.6.3.6.1 The types and frequency of field

34、QC samples to becollected, including field blanks, duplicates, and spikes, tripD5612 94 (2013)2blanks, equipment rinsates, background samples, referencematerials, material blanks, and split samples, should be speci-fied. Control parameters for field activities shall be described(see 7.6.3).6.3.6.2 T

35、he types and frequency of laboratory QC samples,such as laboratory control samples, laboratory blanks, matrixspikes, matrix duplicates, and matrix spike duplicates, shall bespecified. Any specific performance criteria shall be specified.Data validation criteria shall be defined.6.4 Project Documenta

36、tionAll documents required forplanning, implementing, and evaluating the data collectioneffort shall be specified. These may include, although are notlimited to, a statement of work, technical and cost proposals,work plan, sampling and analysis plan, QAPjP, health andsafety plan, community relations

37、 plan, documents required byregulatory agencies, requirements for raw field and analyticalrecords, technical reports assessing the environmental data, andrecords retention policy. Planning documents shall specify therequired level of document control and identify the personnelhaving access. Document

38、 formats that may be required toensure that all data needs are satisfied shall be specified. Inaddition, a project schedule that identifies critical milestonesand completion dates should be available.7. Standard Guide for Environmental Field Operations7.1 Purposesthe field organization must conduct

39、its op-erations in such a manner as to provide reliable informationthat meets the DQOs. To achieve this goal, certain minimumpolicies and procedures must be implemented in order to meetthe DQOs.7.2 Organization The field organization shall be struc-tured such that each member of the organization has

40、 a clearunderstanding of his or her duties and responsibilities and therelationship of those responsibilities to the total effort. Theorganizational structure, functional responsibilities, levels ofauthority, job descriptions, and lines of communication foractivities shall be established and documen

41、ted. One personmay cover more than one organizational function.7.2.1 ManagementThe management personnel of the fieldorganization is responsible for establishing organizational,operational, health and safety, and QA policies. Managementshall ensure that the following requirements are met: (1) theappr

42、opriate methodologies are followed, as documented in thestandard operating procedures (SOPs); (2) personnel under-stand clearly their duties and responsibilities; (3) each staffmember has access to appropriate project documents; (4) anydeviations from the project plan are communicated to projectmana

43、gement; and (5) communication occurs between the field,laboratory, and project managements, as specified in the projectplan. Management shall foster an attitude within the organiza-tion that emphasizes the importance of quality and supportsimplementation of the QAPjP.7.2.2 Quality Assurance Function

44、 The organization shallappoint an individual(s) to be responsible for monitoring fieldoperations in order to ensure that the site facilities, equipment,personnel, procedures, practices, and documentation are inconformance with the organizations QAPP and any applicableQAPjP. The QA monitoring functio

45、n should be entirely sepa-rate from and independent of personnel engaged in the workbeing monitored. The QA function shall be responsible for theQA review in accordance with 7.7.7.2.3 PersonnelIt is the responsibility of the organizationto establish personnel qualifications and training requirements

46、for all positions. Each member of the organization shallpossess the education, training, technical knowledge, andexperience, or a combination thereof, to enable that individualto perform his or her assigned functions. Personnel qualifica-tions shall be documented in terms of education, experience,an

47、d training. Training shall be provided for all staff members,as necessary, so that they can perform their functions properly.7.2.4 Subcontractors The use of subcontractors shall notjeopardize data quality. The field organization is thereforeresponsible for ensuring that its subcontractors are in com

48、pli-ance with the requirements of this section as is appropriate tothe specific task(s) they are performing.7.3 Field Logistics:7.3.1 GeneralSampling site facilities shall be examinedprior to the start of work in order to ensure that all requireditems are available. The actual sampling area shall be

49、 examinedto ensure that trucks, drilling equipment, and personnel haveaccess to the site. Security, health and safety, and protection ofthe environment shall be controlled at the site support areas andsampling site.7.3.2 Field MeasurementsProject planning documentsshall both address the type of field measurements to beperformed and plan for the appropriate area to perform thework. Planning documents shall address ventilation, protectionfrom extreme weather and temperatures, access to stablepower, and provisions for water and gases of required purity.Plans sha