EN 2267-002-2015 en Aerospace series - Cables electrical for general purpose - Operating temperatures between -55 and 260 - Part 002 General《航空航天系列 通用电缆 工作温度为-55℃～260℃-第002部分 总则》.pdf

《EN 2267-002-2015 en Aerospace series - Cables electrical for general purpose - Operating temperatures between -55 and 260 - Part 002 General《航空航天系列 通用电缆 工作温度为-55℃～260℃-第002部分 总则》.pdf》由会员分享，可在线阅读，更多相关《EN 2267-002-2015 en Aerospace series - Cables electrical for general purpose - Operating temperatures between -55 and 260 - Part 002 General《航空航天系列 通用电缆 工作温度为-55℃～260℃-第002部分 总则》.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 2267-002:2015Aerospace series Cables,electrical, for general purpose Operating temperaturesbetween -55 C and 260 CPart 002: GeneralBS EN 2267-002:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 2267-002:2015.It supersedes BS E

2、N 2267-002:2012 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purp

3、ort to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 87662 2ICS 49.060Compliance with a British Standard cannot confer immunity fromlegal obligations.Th

4、is British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2015.Amendments issued since publicationDate Text affectedBS EN 2267-002:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2267-002 July 2015 ICS 49.060 Supersedes EN 2267-002:2012En

5、glish Version Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 C and 260 C - Part 002: General Srie arospatiale - Cbles, lectriques, dusage gnral - Tempratures de fonctionnement comprises entre -55 C et 260 C - Partie 002: Gnralits Luft- und Raumfahrt -

6、 Leitungen, elektrisch, fr allgemeine Verwendung - Betriebstemperaturen zwischen -55 C und 260 C - Teil 002: Allgemeines This European Standard was approved by CEN on 29 November 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving

7、 this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three offici

8、al versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of A

9、ustria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sw

10、eden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for

11、CEN national Members. Ref. No. EN 2267-002:2015 EBS EN 2267-002:2015EN 2267-002:2015 (E) 2 Contents Page European foreword .3 1 Scope 4 2 Normative references 4 3 Terms, definitions and symbols .5 4 List of product standards .5 5 Materials and construction .6 6 Identification and marking . 10 7 Tech

12、nical specification 11 BS EN 2267-002:2015EN 2267-002:2015 (E) 3 European foreword This document (EN 2267-002:2015) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this

13、 Association, this European Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text

14、or by endorsement, at the latest by January 2016, and conflicting national standards shall be withdrawn at the latest by January 2016. This document supersedes EN 2267-002:2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN

15、and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, C

16、zech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United King

17、dom. BS EN 2267-002:2015EN 2267-002:2015 (E) 4 1 Scope This European Standard specifies the list of product standards and common characteristics of electrical cables for use in the on-board electrical systems of aircraft at operating temperatures between 55 C and 260 C (except otherwise specified in

18、 product standards). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document

19、 (including any amendments) applies. EN 2083, Aerospace series Copper and copper alloys conductors for electrical cables Product standard EN 2084, Aerospace series Cables, electrical, general purpose, with conductors in copper alloy Technical specification EN 2235, Aerospace series Single and multic

20、ore electrical cables, screened and jacketed Technical specification EN 2267-003, Aerospace series Cables, electrical, for general purpose Operating temperatures between 55 C and 260 C Part 003: Ink jet printable Product standard prEN 2267-004 1), Cables, electrical, for general purpose Operating te

21、mperatures between 55 C and 260 C Part 004: CO2laser printable Product standard EN 2267-005, Aerospace series Cables, electrical, for general purpose Operating temperatures between 55 C and 260 C Part 005: UV laser printable Product standard prEN 2267-006 1), Cables, electrical, for general purpose

22、Operating temperatures between 55 C and 260 C Part 006: YAG X3 laser printable Product standard EN 2267-007, Aerospace series Cables, electrical, for general purpose Operating temperatures between 55 C and 260 C Part 007: DMA family, single ink-jet printable and multicore assembly Product standard E

23、N 2267-008, Aerospace series Cables, electrical, for general purpose Operating temperatures between 55 C and 260 C Part 008: DM family, single UV laser printable and multicore assembly Product standard EN 2267-009, Aerospace series Cables, electrical, for general purpose Operating temperatures betwe

24、en 55 C and 260 C Part 009: DRA family, single and multicore assembly Product standard EN 2267-010, Aerospace series Cables, electrical, for general purpose Operating temperatures between 55 C and 260 C Part 010: DR family, single UV laser printable Product standard EN 2267-011, Aerospace series Cab

25、les, electrical, for general purpose Operating temperatures between 55 C and 260 C Part 011: DZA family, single and multicore assembly for use in low pressure atmosphere Product standard EN 2267-012, Aerospace series Cables, electrical, for general purpose Operating temperatures between 55 C and 260

26、 C Part 012: DZ family, single UV laser printable for use in low pressure atmosphere Product standard EN 3475-100, Aerospace series Cables, electrical, aircraft use Test methods Part 100: General 1) Published as ASD-STAN Prestandard at the date of publication of this European Standard. http:/www.asd

27、-stan.org/ BS EN 2267-002:2015EN 2267-002:2015 (E) 5 EN 3838, Aerospace series Requirements and tests on user-applied markings on aircraft electrical cables EN 4434, Aerospace series Copper or copper alloy lightweight conductors for electrical cables Product standard (Normal and tight tolerances) TR

28、 6058 2), Aerospace series Cable code identification list 3 Terms, definitions and symbols For the purposes of this document, the terms, definitions and symbols given in EN 3475-100 apply. 4 List of product standards EN 2267-003, Aerospace series Cables, electrical, for general purpose Operating tem

29、peratures between 55 C and 260 C Part 003: Ink jet printable Product standard prEN 2267-004, Cables, electrical, for general purpose Operating temperatures between 55 C and 260 C Part 004: CO2laser printable Product standard EN 2267-005, Aerospace series Cables, electrical, for general purpose Opera

30、ting temperatures between 55 C and 260 C Part 005: UV laser printable Product standard prEN 2267-006, Cables, electrical, for general purpose Operating temperatures between 55 C and 260 C Part 006: YAG X3 laser printable Product standard EN 2267-007, Aerospace series Cables, electrical, for general

31、purpose Operating temperatures between 55 C and 260 C Part 007: DMA family, single ink-jet printable and multicore assembly Product standard EN 2267-008, Aerospace series Cables, electrical, for general purpose Operating temperatures between 55 C and 260 C Part 008: DM family, single UV laser printa

32、ble and multicore assembly Product standard EN 2267-009, Aerospace series Cables, electrical, for general purpose Operating temperatures between 55 C and 260 C Part 009: DRA family, single and multicore assembly Product standard EN 2267-010, Aerospace series Cables, electrical, for general purpose O

33、perating temperatures between 55 C and 260 C Part 010: DR family, single UV laser printable Product standard EN 2267-011, Aerospace series Cables, electrical, for general purpose Operating temperatures between 55 C and 260 C Part 011: DZA family, single and multicore assembly for use in low pressure

34、 atmosphere Product standard EN 2267-012, Aerospace series Cables, electrical, for general purpose Operating temperatures between 55 C and 260 C Part 012: DZ family, single UV laser printable for use in low pressure atmosphere Product standard 2)Published as ASD-STAN Technical Report at the date of

35、publication of this European Standard. http:/www.asd-stan.org/ BS EN 2267-002:2015EN 2267-002:2015 (E) 6 5 Materials and construction 5.1 Materials These cable conductors shall be made of copper or copper alloy and nickel-plated according to EN 2083 or EN 4434 code D (except otherwise specified in p

36、roduct standards). 5.2 Construction 5.2.1 Number of cores See Table 1. Table 1 Number of cores 1 2 3 4 5 6 7 8 9 10 Code A B C D E F G H J K Factor for overall dimensions 1 2,00 2,15 2,40 2,70 3,00 3,00 3,30 3,60 4,00 For two cores or more: factor for mass: 1,03; factor for ohmic resistance: 1,03. B

37、S EN 2267-002:2015EN 2267-002:2015 (E) 7 5.2.2 Colour coding of single core cables See Table 2 and Table 3. Table 2 Colour code Table 3 Colours for P, Q, R and S codes Code Colour aCode for core size Colours A Red (2) P Q R S B Blue (6) 001 White Pink White Light yellow C Yellow (4) 002 White White

38、Light blue White D Green (5) 004 Light green Light green White Light green E White (9) 006 White Pink Light blue White F Black (0) 010 White White White White G Brown (1) 012 White Light green Light blue White H Orange (3) 020 White Pink White White J Violet (7) 030 White White White White K Grey (8

39、) 050 White Light green White White L Not yet allocated 051 White Light green White White M 090 White White White N 140 White White White P See Table 3. 220 White White White Q See Table 3. 340 White White White R See Table 3. S See Table 3. T See Table 7. U Not yet allocated V W aFor information: i

40、nternational colour code 5.2.3 Colour coding of unscreened, multicore cables See Tables 4 to 6. BS EN 2267-002:2015EN 2267-002:2015 (E) 8 Table 4 Code P Number of cores in cables Colours 2 Red Blue 3 Red Blue Yellow 4 Red Blue Yellow Green 5 Red Blue Yellow Green White 6 Red Blue Yellow Green White

41、Black 7 Red Blue Yellow Green White Black Brown 8 Red Blue Yellow Green White Black Brown Orange 9 Red Blue Yellow Green White Black Brown Orange Violet 10 Red Blue Yellow Green White Black Brown Orange Violet Grey NOTE Jacket (if requested): codes 002/006/012 light blue, other codes: white. Table 5

42、 Code Q Number of cores in cables Band group configuration Number of rings Wide Narrow 1 No ring on the first core 0 0 2 0 2 3 0 3 4 0 4 5 0 5 6 0 6 7 0 7 8 1 1 9 1 2 10 1 3 Marking with colour rings Basic colour of cores: pink for codes 001/006/020 white for codes 002/010/030 light green for codes

43、004/012/050/051 BS EN 2267-002:2015EN 2267-002:2015 (E) 9 Colour of rings: green Arrangement of colour rings (see Figure 1): 2nd core 3rd core 4th core 8th core Key 1 12 mm to 17 mm 2 1,5 mm to 3 mm 3 3,5 mm to 5 mm 4 3 mm to 6 mm Figure 1 Each ring shall cover at least 3/4 of the circumference. The

44、 wide rings shall be twice the width of the narrow rings. Table 6 Code R Number of cores in cables Colours 2 White Blue 3 White Blue Yellow 4 White Blue Yellow Green BS EN 2267-002:2015EN 2267-002:2015 (E) 10 Table 7 Code T Number of cores in cables White insulation with alphabetical colour code mar

45、king 2 R B 3 R B Y 4 R B Y G 5 R B Y G W 6 R B Y G W Bk 7 R B Y G W Bk Bn 8 R B Y G W Bk Bn O 9 R B Y G W Bk Bn O V 10 R B Y G W Bk Bn O V Gy NOTE Instead of coloured insulation, each core shall be marked with the corresponding letter and following the dedicated marking length of Figure 1 Key 1. 6 I

46、dentification and marking The identification and marking of cables by the manufacturer shall be in accordance with EN 2084. As the designation, required for orders, is generally too long for use in electrical drawings, a shorter cross designation (without colour information) is given in TR 6058 plus

47、 the corresponding nearest AWG (gauge code). EXAMPLE 1 Designation: EN 2267-007A006P Cross reference: DM A 20 This shorter designation is used for identification and marking as in the following example (see Figure 3): EN DM A 20 FR A 98 Reference to EN standard cable 4 spaces 3)Type code Specific co

48、de Gauge code Manufacturer country code Manufacturer code Year of manufacturing 3)Spaces are mandatory, with a possible exception for the second one. BS EN 2267-002:2015EN 2267-002:2015 (E) 11 Figure 2 For multicore cable with jacket, the marking shall be optional on core(s) and mandatory on jacket. For multicore cable without jacket, each core shall be marked with its own designation. The cables (single core or jacketed cable) shall be capable of being printed with the user-applied markings according to EN 3838.